Categories

Best Resistance Meter

Amprobe AMB-45 Insulation Resistance Tester

  • Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors.
  • Digital meter with automatic range selection.
  • Internal memory stores up to 4,000 test results for later download to a PC.
  • Measures voltage from 0 to 600V AC or DC and insulation resistance from 0 to 4,000 megaohms with 250, 500, and 1,000V DC test voltage.
  • Safety rated to European Standard EN 61010-1 Category III 600V and Category II 1,000V.
  • Internal memory to store measurements for future reference.
  • Insulation resistance with 250, 500 & 1000VDC test voltages: 0-4.000/40.00/400.0/4000MΩ ±3% Rdg ± 5 LSD 003c 2GΩ ±5% Rdg ± 5 LSD 003c4GΩ.
  • Low resistance: 0-400.0, 4000Ω 1% Rdg + 5 LSD.
Check Stock

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

Capacitance Meter Capacitor Tester Capacitance Resistance Meters Ohmmeters Resistor LCR Meter Measures AC/DC Current Capacitance Frequency Diode Test Continuity Test Temperature (UT601)

  • ☛ WIDE APPLICATION---With a broad capacitance measurement range and precise accuracy, the capacitance meter capacitor tester can measure resistance, transistor, diode and continuity buzzer.
  • ☛ LARGE DISPLAYING SCREEN---With large displaying screen, the capacitance meter capacitor tester allows you to read clearly and easily, convenient to read.
  • ☛ RANGE SWITCH---The range switch enables you to choose related resistance, capacitance and inductance to measure, according to your relative data, easy to operate.
  • ☛ SAFE TO OPERATE---Adopting durable insulating cover, the capacitance meter capacitor tester is safe to operate. Accurate and clear test port will simply your process.
  • ☛ LOW BATTERY INDICATION---The capacitance meter capacitor can be used in measuring the circuit designed capacitance of cable, switch and PCB layout. Diode and buzzer continuity measurements, inductance measurement, low battery indication.
Check Stock

KAKOOTI Multimeter Test Leads Kit，2PCS Test Probes 1000V 20A 4PCS Silicone Alligator Clips Test, Multimeter Alligator Clips Set for Fluke/AstroAI/INNOVA/KAIWEETS Digital multimeter Clamp Meter

  • ✅【 Excellent Quality 】 This probe test lead cable is universally suitable for most of digital multimeter voltmeter.Multimeter test leads with banana plug are all made of high quality pure copper material, strong conductivity, low resistance and no signal loss. Leads: CAT II 1000V 20A..
  • ✅【Universal And Compatible】Multimeter leads probe cable clips multi plug tool kit. Multimeter Test Leads Probes and aligator electric clip makes electrical work easier and more precise. The Perfect test tool for precision testing devices. Perfectly fits all kinds of multimeters like digital clamp meters, digital multimeters, volt meter，ohm meter, electrical meter，bench power supply，multi meter electric tester，megger test leads，amp meter，esr meter，multimeter tester.
  • ✅【Sturdy & Heavy Duty】This crocodile clip is rust-proof, corrosion-resistant, oxidation-resistant, compact and durable.Silicon rubber material, double insulation, Each crocodile clip overall jaw perfect solid bite, they are clamping tight, long-term use without deformation.
  • ✅【Conductivity] 】The test lead set has excellent tensile strength and bending strength, as well as low strength and excellent electrical conductivity. It is very useful for electricians and maintenance p....
Check Stock

Digital Resistance Ground Earth Tester UT501A 1000V Insulation Resistance Tester Earth Ground Resistance Earth Ground Resistance Meter Multimeter Voltmeter Earth Resistance Tester

  • MULTI-FUNCTIONAL MULTI-METER INSULATION TESTER--This insulation resistance tester can measure insulation resistance, AC voltage, etc.
  • HIGH ACCURACY AND STABLE PERFORMANCE DIGITAL EARTH RESISTANCE TESTER--High degree of accuracy, stable performance, easy operation and reliability.
  • MULTI-FUNCTIONAL AND ECONOMICAL SUPPORTS EASIER OPERATION--Support automatic measurement, low battery indication, LCD backlight, alarm light display, alarm buzzer.
  • WIDELY APPLICATIONS FOR DAILY USE--Widely used for insulation resistance measurement for insulation materials and various kinds of electric equipments such as transformer, electric machines, cables, switches, electrical appliances.
  • IDEAL TOOL FOR ELECTRICAL EQUIPMENT TESTING AND INSPECTING--It is a ideal tool for electric equipment maintenance, testing and inspection.
Check Stock

AEMC 6240 Four-Input Digital Microohm Meter with 10A Kelvin Clips and DataView Software, 6 Test Ranges, 400 Ohms Resistance

  • Digital microohm meter has six test current and resistance ranges for low-resistance measurements from 1 microohm to 400 ohms.
  • Four input terminals for taking Kelvin-type, four-wire resistance measurements, which are more accurate than two-wire resistance measurements.
  • Includes PC software for configuring the meter, storing and analyzing data, generating reports, and performing temperature compensation of readings.
  • Polarity reversal function improves reading accuracy by compensating for interference from thermal electromagnetic fields (EMF).
  • Meets EN safety standard 61010-1, and is rated for CAT III installations to 50 volts and CAT II installations to 300 volts.
Check Stock

Megger MIT515-US Insulation Tester, 10 Teraohms Resistance, 5kV Multi-Range Test Voltage

  • Insulation resistance meter measures voltage, current, capacitance, and insulation resistance in high-voltage electrical equipment.
  • Multiranging digital meter performs timed IR, PI, and DAR.
  • Memory includes time/date stamping of results and data logging.
  • Measures insulation resistance from 10 kilohms to 10 teraohms, voltage from 30 to 660V AC/DC, current from 0.01nA to 6mA, and capacitance from 10nF to 25 microfarads.
  • Safety rated to European Standard 61010-1 Category IV, 600V and is rated to IP65 to be dust-tight and protected against jets of water.
Check Stock

RC Watt Meter DC 60V/100A Digital LCD Balance Voltage Battery Power Analyzer Wattmeter Tester Checker Watt Volt Amp Meter

  • Measures 0 to 60 Volts. Works on 12, 24, 36, and 48 volt battery bank systems..
  • Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 7 mA..
  • This is the All-In-One Meter:a power meter, a volt meter, an amp-hour meter, ammeter and energy meter.Digital LCD screen gives clear crisp number readings..
  • Perfect troubleshooting tool:it's indispensable for analyzing, testing and troubleshooting any DIY DC power project..
  • Professional RC Watt Meter is an excellent addition to your RC hobby, DC circuits, Solar system, Boat/RV & Battery Backup systems!.
Check Stock

DUOYI DY4100 Digital Earth Ground Resistance Tester Multimeter Resistance Measurer

  • 【Application】 Resistance Meter Tester is small and easy to carry. Applicable to the store, post, rail, roommate, chemical, communications, mining and other departments to measure the earth resistance of various devices and the resistance of low impedance conductors..
  • 【Multiple selection】 Range selector switch, 20Ω / 200Ω / 2000Ω / GROUND VOLTAGE. More options, you can select the desired measuring range so that you can use it in many situations.
  • 【Easing Reading】 78x50mm display window LCD display, large screen display value for your reading. LCD display shows measured data and unit symbols. The maximum display "1999 " is more accurate..
  • 【Easy to use】 Self-locking measuring button: Press the test button from the bottom right to start the test. HOLD is a digit hold switch, POWER is a self-locking power switch. Test operating display: This light turns on when testing the correct cabling..
  • 【High Quality Materia】 Thanks to the robust housing, compact internal structure, this resistance meter offers the perfect properties of drop resistance and super long life. Powered by 8 AA 1.5 V alkaline batteries (not included), support low battery indicator..
Check Stock

INGCO Clamp Meter 1000A True RMS 6000 Counts for AC Current AC/DC Voltage VFD LOZ NCV Capacitance Resistance Continuity Temperature DCM10004

  • The clamp meter can measure AC current, AC/DC voltage, capacitance, continuity, resistance, frequency or duty cycle, and temperature..
  • Automatic range turntable design and flashing light make it more convenient for you to operate the clamp meter. It switches off automatically without....
  • The orange backlight is on, and the buzzer sounds when resistance value 80V or current > 3A with....
  • Data hold function is designed for easy reading. VFD mode for higher accuracy readings.
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check Stock

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Cliff Walk at Pourville (1882) by Claude Monet, Framed Canvas Wall Art.3D Giclee Print, Genuine Wood Framed,Brushstroke Texture that Resembles Hand Painted Oil Painting. 5 Frame Designs

  • Digital milliohm meter measures resistance up to 2,000 ohms.
  • Four input terminals for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements.
  • 100 microohm resolution for measuring small amounts of resistance.
  • Choice of three test currents for more precise readings.
  • Over-temperature and over-voltage warnings help prevent damage to the meter.
  • Accurate four terminal measurement down to 100µ ohms does not require test leads resistance compensation.
  • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm.
  • Indicates measurement errors due to temperature or connection problems.
  • Battery powered ,IEC / EN 61010-1 ,Test leads, Instruction manual, Shoulder belt, 1.5V(AA) x 8 Batteries.
Check Stock

6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings

  • Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
  • The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.
Check Stock