Categories

Best Resistance Pcb

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • ...r: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
  • This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit s....
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Working condition: these LED light strip connectors are able to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

RunJRX Eva Keyboard PCB Foam 108 Layout,Poron Switch Pads 120Pcs and Keyboard Sound Dampeners for Custom Keyboard (RJ-146)

  • 【EVA MATERIAL】High density, micro-fine and homogeneous cell structure with excellent resistance to compression deformation. Widely used for sealing and vibration damping of components in communications, computers and household appliances..
  • 【SWITCH PADS】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds, keep the typing feel consistent.We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【KEYBOARD PCB FOAM】Modular design fits 108 Layout, no need to cut, easy to install. It is a new project to update the keyboard by filling the gap between the pcb and the positioning board, reducing vibrations and typing sounds..
  • 【USEFUL TOOLS】We prepar a plastic prying bar to help you dismantling your keyboard.Tweezers to help you put the switch pads..
  • 【PACKAGE INCLUDES】EVA Keyboard Pcb Foam 108 Layout x 1, Poron Switch Pads x 120, Plastic Prying Bar x 1, Tweezers x 1..
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 10 Pcs Print Circuit Board Drill Bits, 0.1mm to 1.4mm Drill Bits Carbide Drill Bits Tool Set(0.1mm)

  • Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional).
  • Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for PCB, SMT, CNC, mold, sculpture, plastic, copper, stainless steel..
  • Drill bit has a large scraps discharge space,reduce cutting force and broken drill,little resistance and smoothly during the scraps discharge,improve the quality of hole wall..
  • PCB drill bits are easy to change out and do a great job cutting through the PCB for solder holes.Come in a great storage container that is easy to grab the drill bit you need when you need it..
  • These bits are made of high quality materials,work fantastic on PCB boards. Sharp and twisted flute will make the drilling be more easy..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

RunJRX YIMAGUJRX Keyboard Poron Foam Dampening Foam Modular Foam Case Foam,Bottom Dampening Foam for 61/64/87/100/104/108 Layout Keyboard

  • 【Poron Material】High Density, Micro-Fine And Homogeneous Cell Structure With Excellent Resistance To Compression Deformation. Also Very Suitable For The Bottom Foam Of The Keyboard..
  • 【Useful Tools】Everyones Keyboard Is Different, So We Have A Pair Of Scissors To Make It Easy For You To Cut It To The Perfect Size. And We Also Prepar A Plastic Prying Bar To Help You Dismantling Your Keyboard..
  • 【Poron Pcb Modular Dampener】We Also Prepared Modular Dampener. Modular Design Fits All Layout Keyboard, No Need To Cut, Easy To Install. It Is A New Project To Update The Keyboard By Filling The Gap Between The Pcb And The Positioning Board, Reducing Vibrations And Typing Sounds..
  • 【Warm Tips】Foam Size Is About 35X15X0.35Cm/13.7X5.9X0.13In. Poron Is Softer Than Eva, Sounds More Clear Then Eva..
  • 【Package Includes】Poron Full Layout Foam X 1, Poron Keyboard Pcb Modular Dampener X 120 , Plastic Prying Bar X 1, Scissors X 1, Tweezers X 1..
Check Stock

MA Ford 302MD #89 Solid Carbide Circuit Board Drill

  • ?【Quality Material】The PCB Drill Bits are made of high quality tungsten carbide , highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency..
  • ?【10 Pieces PCB Drill Bits Set】Cutting edge diameter: 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm..
  • ?【High Precision】With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left..
  • ?【Package Include】Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • ?【Wide Application】Great for 3D Printer Nozzle Cleaning, Amber beeswax, circuit boards, bakelite, CNC engraving plexiglass, jewelery, metal plastic and other precision drilling..
Check Stock

Mr. Pen- Heat Tape, 10mm x 33m(108ft), 2 Rolls, Heat Tape for Sublimation, Heat Resistant Tape, Heat Transfer Tape, High Temperature Tape, Thermal Tape, Heat Press Tape, High Heat Tape

  • ...viding superior performance and easy sticking. The heat-resistant and strong silicone adhesive makes the heat transfer tape easy to stick and no residue after peeling off..
  • This heat-resistant tape is compatible with a wide temperature range of up to 260℃ (536℉). (Heat resistance: short period heat resistance: 260℃ (500℉) Long period heat resistance: 220℃ (428℉)). The heat press tape protects electronic products, electric motors, painting, packing fixing, and printing PCB board..
  • Mr. Pen heat tape leaves zero marks or residue on any material. It gives a clean peel without leaving messy and grubby marks and doesn’t bother you with the smell..
  • Our heat press tape can help you with your business needs of heat pressing and electrical wires, 3D printer, PCB boards, automotive insulation, high-temperature powder coating, and semiconductor manufacturing..
Check Stock

Micro Drill Bits - 10Pcs 0.3mm to 1.2 mm Tungsten Carbide PCB Print Circuit Board Tip Rotary Tool Jewelry CNC Engraving Drill Bits Set for PCB Circuit Board, Dremel PCB Jewelry Making (0.3-1.2mm)

  • PREMIUM MATERIAL - These mini drill bits are made of tungsten steel,carbide tipped drill bits with high hardness,high wear resistance, resistance to bending, anti-impairment.Replacements for your CNC machines and any Handheld tools..
  • MEET YOUR NEED - Cutting edge diameter of these PCB Drill Bit Set: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm..
  • SHARP EDGE - End Mill Sets can milling groove and clean surface,a large scraps discharge space,little resistance and smoothly during the scraps discharge.These sets of tool can work quickly and cleanly..
  • IMPROVE ACCURACY - The end milling engraving bits with shape cutting edge,reduce cutting force and prevent drill broken,improve the drilling accuracy.Attention: Don't use on too hard material,like high hardness iron..
  • WIDE APPLICATION - The PCB drill bit sets are great for punching at printed circuit boards,cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
Check Stock

Baosity 2Pcs 3D Printer Heated Bed Thermal Insulator Cotton Insulation Mat 400x400mm

  • The closed-cell elastic material has excellent properties such as softness, resistance to bending, cold resistance, heat resistance, water resistance, low thermal conductivity, shock absorption and sound absorption..
  • The 3D printer hot bed can achieve the effect of reducing the heat and cold loss..
  • Can be used for aluminum substrate, PCB hot bed, silicone hot bed bottom.
  • The temperature of the medium is in good condition from -50 °C to 150 °C..
  • Clean the bottom of the hot bed before use, and tear the adhesive back to the bottom of the hot bed..
Check Stock