Categories

Best Resistance Welding Alloys

C.S. Unitec | Non-Sparking & Non-Magnetic Aluminum Bronze Socket Wrench Set |16pc 3/4 inch Drive Socket Set 1-5/16 to 2 inch,EX1540-KIT A

  • Our Tools are specially manufactured with Copper- Beryllium alloys or Aluminum Bronze alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • This industrial quality hammer welding tool is designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • Non-Metallic benefits of these alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • Advanced forging technology ensures the high quality and refined appearance of all our products.
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

RISON Titanium Plate Sheet 16x200x300mm Titanium Plate GR5 Titanium Sheet 2PCS Titanium Grade 5 Sheet

  • Specifications: Dimensions: 16x200x300mm.
  • Titanium plate: This kind of titanium plate has the characteristics of high strength-to-weight ratio, corrosion resistance, high working temperature and light weight. High-quality and reliable product traceability enhances competitiveness. Titanium alloys with good low temperature properties can still maintain their mechanical properties at low and extremely low temperatures..
  • Good corrosion resistance: Titanium works in humid atmosphere and sea water, and its corrosion resistance is much better than stainless steel.
  • it is particularly resistant to pitting, etching and stress.
  • and other organic materials have excellent corrosion resistance..
  • GR5 Titanium: Grade 5 is comparable in better strength than to 6061-T6 aluminum. It has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness, no deformation after processing, dense and defect-free material, and easy to polish..
  • Wide range of uses: suitable for decoration, packaging, construction, transportation, electronics, aerospace and other industries..
Check Stock

RISON Titanium Plate Sheet 20x200x300mm Titanium Plate GR5 Titanium Sheet 2PCS Titanium Grade 5 Sheet

  • Specifications: Dimensions: 20x200x300mm.
  • Titanium plate: This kind of titanium plate has the characteristics of high strength-to-weight ratio, corrosion resistance, high working temperature and light weight. High-quality and reliable product traceability enhances competitiveness. Titanium alloys with good low temperature properties can still maintain their mechanical properties at low and extremely low temperatures..
  • Good corrosion resistance: Titanium works in humid atmosphere and sea water, and its corrosion resistance is much better than stainless steel.
  • it is particularly resistant to pitting, etching and stress.
  • and other organic materials have excellent corrosion resistance..
  • GR5 Titanium: Grade 5 is comparable in better strength than to 6061-T6 aluminum. It has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness, no deformation after processing, dense and defect-free material, and easy to polish..
  • Wide range of uses: suitable for decoration, packaging, construction, transportation, electronics, aerospace and other industries..
Check Stock

MARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG

  • 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
  • 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
  • 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
  • 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • ...perature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0620FMPOP brazing rods, with more affordable price!.
Check Stock

100Pcs Aluminum Welding Rods,400℃/752℉ 1.6MM*13INCH Low Temperature Solution Welding Flux-Cored Rodst,Aluminum Brazing Rods,Suitable for Aluminum Metal Welding and Repair of Aluminum Radiator

  • Low-temperature welding: The low-temperature flux core welding wire can be used for welding at temperatures as low as 400℃/752F, reducing the risk of damage to the welded material due to high temperatures..
  • NO SOLDER POWDER NEEDED: This welding wire does not require any solder powder, which makes it a convenient and easy-to-use option.
  • High strength: The use of high-quality aluminum alloys in the welding rod ensures that the welds are strong and durable. it is resistant to rust and corrosion, ensuring that your weld will last for years to come..
  • Only for Welding Aluminum - 100Pcs(19.7"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Easy To Use: Flux Core Welding Wire Is Easy to Use, Making It Ideal for Both Beginners And Professionals Alike. Its Simple Design Means That You Can Get Started With Welding In No Time..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Function Welding Machine: IGBT Full 20-200Amp(Max) with Digital Display for reliable quality and stable performance. Suitable for MMA, Lift TIG, Flux MIG, and Gas MIG. Big enough to handle 2 to 5 pound rolls of wire..
  • ️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium..
  • ️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding..
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIG/Stick Welder Combo Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut Plasma Cutter TIG Welder and Stick Welder CT520DP

  • 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit.....
  • TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function.....
  • PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%.
  • VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • ...ou, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resistance and cut resistance. Straight Thumb design for best grip. Reinforced double leather stitching and high strength sewing on the palm for superior feel, not easy to fall off while working..
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ❆ Advantage: We have updated our CT418 machine. Under the condition that the basic functions remain unchanged, our machine has increased the PULSE function to make the welding effect even better. And the machine adopts a brand-new digital panel, which is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ)..
  • ❆ 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch co....
Check Stock