Categories

Best Resistive Component

Aube by Honeywell TH106/U Electric Heating 7-Day Programmable Thermostat

  • Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
  • 2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
  • Battery-free backup means no re-programming your schedule after power outage.
  • Timeless design complements virtually any room.
  • Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.
Check Stock

Aube by Honeywell TH106/U Electric Heating 7-Day Programmable Thermostat (Renewed)

  • Compatible with electric baseboard, convector and fan-forced heaters. Also ideal for radiant ceilings.
  • 2000-Watt 120-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, 4000-Watt 240-Volt 16.7-Ampere resistive 60-Hertz 2-wires and SPST, (minimum 2-Ampere load).
  • Battery-free backup means no re-programming your schedule after power outage.
  • Timeless design complements virtually any room.
  • Dimensions (height by width by depth): 4.9-Inch by 5-Inch by 1.5-Inch.
Check Stock

Aube by Honeywell TI040/U 7-Day Programmable Timer

  • Ideal for pool pumps. Use the TI040 to run your pool pump for 16-hours a day instead of 24 and recover the cost of the timer in as little as a year or two.
  • Three-operating modes: Manual (conventional on and off switch), Automatic, Temporary bypass.
  • Connection: terminals for No.14 to No.10 AWG wire, multi switch (3-way) compatible, 1.5 HP 120-Volt 30-Ampere (resistive), 10-Ampere (ballast), 2 HP 240-Volt 30-Ampere (resistive), 10-Ampere (ballast).
  • Dimensions (height by width by depth): 9.4-Inch by 7.2-Inch by 3.8-Inch.
Check Stock

GeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
  • The resolution of 3.5 inch touch screen can be adjusted by software.
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
  • It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock

Honeywell PLS750C1000 The Old Ti072-3W Timer Switch with Sunrise Sunset Single or 3 Way Neutral Required

  • Single pole 3 wire (line, load, neutral).
  • Multiswitch (3-way), 4 wire (line, load, neutral, three-way).
  • Maximum Load–1800 W resistive or inductive, 1 HP motor @ 120 V.
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • ...e furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).
Check Stock

Honeywell PLS750C1000 The Old Ti072-3W Timer Switch with Sunrise Sunset Single or 3 Way Neutral Required (2 Pack)

  • Single pole 3 wire (line, load, neutral).
  • Multiswitch (3-way), 4 wire (line, load, neutral, three-way).
  • Maximum Load--1800 W resistive or inductive, 1 HP motor @ 120 V.
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • ... furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 200mm (7.87”) and thickness 5mm (0.2”)..
Check Stock

Honeywell TH1100DH1004 Horizontal PRO 1000 Non-Programmable Thermostat Heat Only Dual Powered Backlit

  • Easy to use and install for home temperature control of electric heating systems.
  • TRIAC switching for accurate temperature control of +/- 1 degrees Fahrenheit.
  • Silent operation with no annoying clicking noise, making it ideal for all rooms including bedrooms.
  • Compatible with electric baseboards (120-240 volt) convectors and radiant ceiling applications with minimum load of 0. 83 A (resistive only) 200 W @ 240 VAC or 100 W @ 120 VAC and a maximum load of 8. 3 A (resistive only) 2000 W @ 240 VAC or 1000 W at 120 VAC.
  • LCD display, on-screen heating command indicator.
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • ... furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 150mm (6”) and thickness 5mm (0.2”).
Check Stock

Line Voltage Mechanical Thermostat, Commercial and Residential, 120 to 240VAC

  • Price For: Each Standards: UL Height: 4-1/2 Remote Sensing Bulb Included: No Mounting Type: Standard Electrical Box Thermostat Voltage: 120 to 240VAC Depth: 1-1/2 Full Load Amps @ 240VAC: 15A Mounting Location: wall Includes: screws Color: White Remote Sensing Capability: No Contact Rating Resistive @ 120V: 22A Enclosure Type: Plastic Cover Number of Switches: 1.
  • Item: Line Volt Mechanical Tstat Thermostat Item: Line Voltage Mechanical Thermostat Thermostat Switch Type: SPST Contact Rating Resistive @ 240V: 22A Thermostat Control Range: 40 Degrees to 80 Degrees F Switch Action: Open on Rise Full Load Amps @ 120VAC: 15A Thermostat Programmable: No Control Range: 40 Degrees to 80 Degrees F Width: 3 Voltage: 120/240/277VAC Thermostat Heating/Cooling: Heating.
  • Country of Origin (subject to change): United States.
Check Stock

Leviton 5603-2TM 15 Amp, 120/277V Decora Rocker 3-Way AC Quiet Switch, 5-Pack, Light Almond

  • Switch frame shields against dust and fits in wallplate to prevent rocker binding.
  • Easy to wire, they work with tungsten, fluorescent and resistive loads.
  • Switch frame shields against dust and fits in wallplate to prevent rocker binding^Terminal screws accept up to No. 12 AGW and Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Sturdy construction for long service life^Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating^Complements every décor.
Check Stock

[10 Pack] BESTTEN Signature Collection Champagne Gold Decorator Wall Light Switch with Screwless Wall Plate, Single Pole, 15A 120V, UL Certified

  • Full-rated current capacity with LED, tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating.
  • Single pole wall light switch, rating 15A 120V, UL certified.
  • Quick push-in and side wiring options available. Full-rated current capacity with LED, tungsten, fluorescent or resistive loads.
  • Easy installation. Simply attach the inner plate to the outlet/switch using the supplied screws and snap on the outer plate cover for a smooth appearance of elegance and sophistication.
  • Signature Collection wall plates are slightly larger size than standard decorator wall plates hiding paint lines and wall imperfections.
Check Stock