Best Retrofit Mounting Brackets

Justech 2PCs Mounting Brackets Stainless Steel for Heavy-Duty Linear Actuators-Silver

• 【High Quality Linear Actuator Mounting Brackets】These Mounting Brackets for Linear Actuator are Made of Stainless Steel Material, Strong and Durable, which are Practical Accessories for Linear Actuator Motor.
• 【Practical Tools】The Linear Actuator Brackets are Designed to Make Mounting the Actuators Much Easier and Allow Them to Rotate Almost 180°, They are Designed to Fit on both Ends of the Linear Actuator.
• 【Handle Size】Short Side Length: Approx. 18mm/ 0.71 ", Long Side Length: Approx. 37.5mm/ 1.48 ", Depth: Approx. 3mm/ 0.12 ".
• 【Easy to Install】Come with Mounting Bolts and Cotter Pins to Help You Install These Brackets, Easy Installation, Support Strongly.
• 【Package Accessories】2 x Mounting Brackets for Linear Actuator, 2 x Cotter Pins, 2 x Mounting Bolts.

240W Shoebox LED Retrofit Kit AC100-277V LED Parking Lot Light Fixture Retrofit 5000K Replace 1000W Metal Halide ETL Listed E39 Base for Outdoor Sports Court lights Street Area Lighting Fixture

• 【SUPER BRIGHT AND ENERGY SAVING】This shoexbox LED retrofit kit provides uniform 34,800lumens at 240W with an incredible Lumen Efficacy of 145 Lm/W to replace 1000W MH/HPS/HID traditional light fixtures, effectively saving 90% of the amount on your energy bills. 80+ CRI Rating and 5000K daylight for super bright outdoor large area lighting..
• 【RETROFIT OLD LIGHTING FIXTURES, SAVE MONEY】Advanced SMD3030 chips and Meanwell driver ensure our LED shoebox retrofit kit high efficiency, long life and high reliability. Excellent heat dissipation system with overheat protection sensor, aluminum heat sink and high speed fan to protect leds at lower operating temperature. Longer lifespan of 500,00 hours, that's about 23 years of 6 hours per day, which will reduce maintenance cost dramatically..
• 【EASY & SAFE INSTALLATION】Shoebox led Retrofit Light Kit has a wide 120 degree beam angle. Just connect the E39 base and Meanwell driver to the fixture socket to quickly replace damaged old bulbs. No need to replace existing fixtures. Adjustable U bracket for horizontal and vertical mounting. Please check retrofit kit picture and dimensions to ensure fitment..
• 【ETL ENSURE WIDE APPLICATION】YELLORE retrofit kit with ETL certifications, ETL approved for use in li....

Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack

• Adjusts to fit 1/4 Inch to 1 Inch thick wall board, paneling or drywall.
• mounting brackets offer specially designed screw holes, for a better looking, easy to install job.
• Adjusts to fit 1/4-Inch to 1-Inch thick wall board, paneling or drywall.
• Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.

PAGOW Linear Actuator Mounting Brackets, Silver Heavy Duty Metal Mounting Brackets for Linear Actuator(2 PCS)

• 180 Degree Rotation: The mounting bracket models allow for the linear actuator to rotate 180 degrees if necessary for your mounting application. This capability works great for applications where you will be pushing at an angle..
• High Quality: The linear actuator mounting brackets are metal to provide the greatest strength possible, while remaining aesthetically pleasing..
• Variety Applications: The mounting brackets are perfectly designed for a variety of applications across all industries. Such as boat hatch applications, custom topper hatches and basement trapdoors. They are designed to fit onto both ends of the linear actuator to ensure stability and precision in all applications..
• These mounting brackets are designed to make the installation of the actuators much easier..
• Package Included: You will receive 2 pieces of mounting brackets, 2 pieces of mounting bolts and 2 pieces of cotter pins..

Spear Point Window Bar Guard 24 x 36 White

• Spear Point Window Bar is engineered from 1/2 in. welded tubular steel for strength and added security against forced entry..
• Several color matched mounting brackets are available. (Sold Separately) Choose from 3 in. projection brackets, flush-mount brackets and inside window....
• Mounting bracket sets includes 3 in. non-reversing safety screws to complete the installation process. Quick Release accessory is required by fire....
• Long lasting finish Rust resistant Helps guard against forced entry through windows Decorative scrolls add a beautiful appearance Mounting brackets....

AUXMART 4 LED Fog Light Bar Mounting Bracket for 2013 2014 2015 2016 2017 Jeep Wrangler Hard Rock Rubicon X 10th Anniversary Editions

• 【Fog Light Mounting Brackets】Sold as a Pair. These brackets allow easy mounting of 4 inch LED fog lights into the front bumper of your Jeep to....
• 【Durable Construction】The bracket is crafted from solid steel, precision laser cut, one-piece fully welded for impressive strength and durability.....
• 【Keep the Light Stable】Thanks to the brackets' high quality build, they are able to firmly hold and support your fog lights securely, and give....
• 【Easy Installation】The brackets mount directly into factory mounting locations, they are easy to install and the fit is seamlessly perfect. There....
• 【Application】These LED fog light mounting brackets are specifically designed for 2013-2017 Jeep Wrangler Hard Rock/ Rubicon X/ 10th Anniversary....

2pcs Heavy Duty Steel Mounting Bracket for Linear Actuator

• 100% Brand New & High Quality，all parts are tested and quality controlled prior to shipment..
• Linear Actuator mounting brackets are manufactured from 1018 carbon steel and are capable of holding a 350 pound (159kg) static load. The mounting brackets allow for the linear actuator to rotate 180 degrees, if necessary for your mounting application..
• High qualified materials,it's hard, safe and reliable, preventing rust..
• Please check your correct replacement parts before purchase, the picture and the description show more detail..
• Packing Contents: 2 pieces of mounting brackets,2 pieces of mounting bolts,2 pieces of cotter pins as pictured..

Single-Gang Drywall Brackets, Pack of 10

• These handy brackets works in place of standard low-voltage outlet boxes.
• Fits single-gang volume controls, switches, or wall plates.
• Ideal for retrofit & adding component outlets after construction.
• No more plastic cut-in boxes needed! | Hardware included.
• For low-voltage Class 2 applications ONLY | Metal | Pack of 10.

Hella 500 500FF 550 Mounting Brackets Hardware Set 2pc

Fortool 48-08-0554 2PC Miter Saw Stand Mounting Brackets Fits For Milwaukee 48-08-0551 Folding Miter Saw Stand, Work With All Brands Of Miter Saws

• 【Models】40-08-0554 Miter Saw Stand Mounting Bracket, designed to be used with the Folding Miter Saw Stand (48-08-0551).
• 【Specifications】Miter saw stand mounting brackets, tool accessory category: saws, material: steel, accessory type: miter saw, height (in): 17.5, width (in): 3.0.
• 【Features】The Miter Saw Mounting brackets allow you to quickly attach and detach a saw from your stand. Each package includes 2 mounting brackets that are designed to work with all brands of miter saws. Brackets allow you to place you saw on a flat surface even when not attached to the stand. Includes saw mounting hardware.
• 【Easy To Install】Easy to install, save your time and money! The function is equivalent to prior parts.

OhLectric Saf-T-Brace For Ceiling Fans - Features 3 Teeth, Twist and Lock Design, 1.5" Heavy Duty Metal Electrical Box - Secure Installation For New, Remodel, Retrofit Application, Silver - OL-39193

• ... modeled to position anywhere on the brace for added security!.
• STRONG BRACE: Modeled to support lighting fixtures up to 150 pounds on 16-inch centers, fixtures up to 50 pounds on 24-inch centers, and fans up to 70 pounds, this ceiling fan saf-t-brace is ideal for all retrofit projects!.
• PERFECT PACK: Featured with the one Saf-T-Cap, Romex connector, bracket, and mounting hardware, this ceiling fan mounting box is the essential stuff and going to be the perfect addition in every electrical worker’s toolbox.
• IDEAL FOR: Designed to be efficient and made to stand for the test of time, this ceiling fan fixture support is suitable for all new and old construction works. Also, can be used in all remodel, retrofit projects and in renovating an old home or any living space.

Hipshot Guitar Tuner Upgrade Kit 6 Inline Headstocks Grip Lock Open Chrome Bass Side Non Staggered Bundle with a Lumintrail Polishing Cloth

• Standard tuners retrofit guitars with 25/64" (10mm) headstock holes.
• Universal Mount Plate is included in this kit meaning your tuners will retrofit without drilling or screwing.
• Includes 6 inline headstocks, universal mounting plate, nuts, washers, and Lumintrail polishing cloth.

Lpteso RGB LED Light Bar 52'' inch + 2PCS 4 Inch Flood RGB LED Pods with 16 Solid Colors Chasing Ring Changing with Strobe Flashing with Upper Windshield Mounting Brackets Fit Wrangler JK 2007-2018

• ... 【High Performance】 IP67 protection level RGB led off road lights has excellent waterproof, dustproof and shockproof performance.The die-cast aluminum housing, stainless steel brackets can withstand harsh outdoor conditions..
• 【With Special Mounting Bracket】Special Upper windshield mounting brackets fit for 2007-2018 Wrangler JK.High quality mounting brackets, easy installation, no drilling required, direct bolt-on installation. Special mounting brackets with LED light bar and LED pods combination, combined purchase, one step in place, efficient and convenient..
• 【What You Will Get】1pc 52inch 300W RGB LED light bar + 2pcs 4inch 18W RGB LED pods fog lights with Amazing Chasing RGB Halo Strip + 2pcs Upper windshield mounting brackets fit for 2007-2018 Wrangler. Rocker switch, control wiring harness and necessary mounting brackets are included. We offer One Year hassle-free warranty and Lifetime free service.Please buy with confidence,If any questions, please feel free to contact us directly..