240W Shoebox LED Retrofit Kit AC100-277V LED Parking Lot Light Fixture Retrofit 5000K Replace 1000W Metal Halide ETL Listed E39 Base for Outdoor Sports Court lights Street Area Lighting Fixture

  • 【SUPER BRIGHT AND ENERGY SAVING】This shoexbox LED retrofit kit provides uniform 34,800lumens at 240W with an incredible Lumen Efficacy of 145 Lm/W to replace 1000W MH/HPS/HID traditional light fixtures, effectively saving 90% of the amount on your energy bills. 80+ CRI Rating and 5000K daylight for super bright outdoor large area lighting..
  • 【RETROFIT OLD LIGHTING FIXTURES, SAVE MONEY】Advanced SMD3030 chips and Meanwell driver ensure our LED shoebox retrofit kit high efficiency, long life and high reliability. Excellent heat dissipation system with overheat protection sensor, aluminum heat sink and high speed fan to protect leds at lower operating temperature. Longer lifespan of 500,00 hours, that's about 23 years of 6 hours per day, which will reduce maintenance cost dramatically..
  • 【EASY & SAFE INSTALLATION】Shoebox led Retrofit Light Kit has a wide 120 degree beam angle. Just connect the E39 base and Meanwell driver to the fixture socket to quickly replace damaged old bulbs. No need to replace existing fixtures. Adjustable U bracket for horizontal and vertical mounting. Please check retrofit kit picture and dimensions to ensure fitment..
  • 【ETL ENSURE WIDE APPLICATION】YELLORE retrofit kit with ETL certifications, ETL approved for use in li....
Check Stock

200W Shoebox LED Retrofit Kit 29000LM,5000K E39 Base LED Parking Lot Tennis Court Lights Retrofit Kits AC 100-277V

  • 200w Led Retrofit Kit - With 145 lumens per watt, the led retrofit kit provides 29,000 lumen output. This 200 watt led shoebox retrofit kit is a....
  • Maintenance Saving - Advanced SMD3030 LEDs and Meanwhile Driver for superior performance and longer lifespan.Excellent heat dissipation system with....
  • Quick Installation - The led retrofit kits come with E39 Mogul Base - Just screw in. Replace the ballast with the LED Driver and old bulb with the LED....
  • Wide Application - High Bay led retrofit kit is perfect for retrofitting existing high bay,low bay, wall pack, led parking lot pole lights,led tennis....
  • 5 Year Warranty - ETL DLC listed, which ensures Rebate Eligible and lowest maintenance. We also offer 5 years warranty for the 800 watt metal halide....
Check Stock

iJDMTOY (2 Universal Sealed Rubber Housing Caps Compatible With Headlight Install Xenon Headlight Kit, LED Headlights Bulbs, Aftermarket Headlamp Retrofit, etc

  • This listing is for (2) universal sealed rubber housing caps.
  • Good for xenon LED conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
Check Stock

Aftermarket Replacement 4 Pc Set Halogen Headlights & Signal Marker Lamps Compatible with 1999-2007 Sierra Pickup Truck Replaces 15199560 15199561 15850351 15850352

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your....
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72629 LED Recessed Lighting Retrofit Kit 8\ 35W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72631 LED Recessed Lighting Retrofit Kit 8\ 35W 5000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

2.5 Inch Bi-LED Projector Lens,Car Headlight Retrofit Kit with Hi/Lo Beam,70W 20,000LM 6000K White,DOT Approved Focus Beam with Sharp Cut off Line No Blind Oncoming Car Upgrade Bi-Xenon Projector Len…

  • 【DOT COMPLIANCE,STREET LEGAL】This headlight conversion kit with DOT compliance designed reflector and focus lens,the focus beam with perfect cut off line will never blind oncoming driver,No Shadows,No Dark Spot,Maximize Ensuring you and other driver safety..
  • 【BRIGHT&FOCUS&LONG LASTING DURABILITY】 All LED headlight bulbs have to use tight Heat sink because of the size limited,our Bi LED Projector Lens use Pro 5 times bigger heat sink,we can use real high power vehicle grade LED chips,after designed reflector and lens,you will get 350% brighter and Super focused white lightings to let you see further and wider,and it will operate stablely for 50,000 hrs under reasonable temperture..
  • 【FIT FOR MOST CAR】Features a threaded-shaft style mount on the back that allows the projectors to be locked on their car headlight hardware, it can be mounted in H1/H4/H7 reflectors with none or min retrofit.
  • 【Satisfied Guarantee】30 days no hassle return or exchange and 24 hours online service.if you have any question,please feel free contact us in any time,we will help you solve the problem..
Check Stock

Morris Products 72656 LED 4\ Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K, 1-Pack

  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K provide an energy efficient alternative to Incandescent lighting..
  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K features include:.
  • Can be installed in most 4" downlight cans.
Check Stock

Salzmann 3M Spoke Reflectors for Bicycles | High Visibility | Made with 3M Scotchlite | 72 Pieces Silver

  • Made with 3M Scotchlite reflective material with a reflective rate of 560 cd/lux..
  • 360° reflection helps to increase your visibility at night and in low light weather conditions..
  • The reflectors are 2.7 inches long and come in a pack of 72 pieces..
  • The reflectors can be attached to the spokes without any tools and are equally as easy to remove..
  • Suitable for all standard spokes, please be aware that these spoke reflectors have not been designed for bladed spokes..
Check Stock

NEEWER Photo Studio Heavy Duty Metal Clamp Holder with 5/8 Light Stand Attachment for Reflector

  • High quality powerful spring clamp designed for holding studio reflectors.
  • It can be attached to any light stand with a standard 5/8" stud.
  • Capable of holding large reflectors thanks to its high load capacity.
  • Simple to use. Just attach the reflector to the stand via the reflector holder, perfect for positioning your reflectors..
  • The strong clip main body is made of metal, sturdy and durable. Note: The reflector is NOT included..
Check Stock