Categories

Best Reversed Slot Tube

252 Coin Wrappers with Coin Sorter Tubes - Funnel Shaped Color-Coded Coin Counter Stacking Roll Sorting Tubes

  • ▼ EXTRA WRAPPERS! Our 4 color coded coin sorting tube set comes with 252 wrappers, more than the competition for the same price! 63 of each type.
  • ▼ Quick Fill Instructions: 1) Fill the color coded tubes with your coins and use the slot to determine when your tube is full. 2) Insert the coin....
  • ▼ Features: ABA Standards Color Coding: Blue= Nickels, Green= Dimes, Orange= Quarters, Red= Pennies. This makes it east to match your tubes with....
  • ▼ Coin slot indicator to pour out excess coins and indicate when the tube is full. Please note: The tube height is measured to correlate to new....
  • ▼ Our Guarantee: Nadex manufactures a variety of coin management and money storage products. All Nadex products are backed by a 1 Year warranty!....
Check Stock

6505-08-08 Hydraulic Fitting 1/2\ Female JIC Swivel X 1/2\ Male Pipe Carbon Steel

  • 6505-08-08 HYDRAULIC FITTING 1/2" FEMALE JIC SWIVEL X 1/2" MALE PIPE (Tube O.D. / Hose I.D. Size).
  • THREAD SIZES FOR 6505-08-08 HYDRAULIC FITTING 3/4"-16 FEMALE JIC SWIVEL X 1/2" MALE PIPE.
  • THIS PART NUMBER IS OFTEN REVERSED IN THE INDUSTY. PLEASE VERIFY THE THREAD SIZES BEFORE PURCHASING.
  • TO MEASURE THREAD SIZE, CALIPERS WORK BEST.
Check Stock

2 Pack - Heavy Duty Pot Rack Organizer, 5 Tier Pan Rack Holder, Holds Cast Iron Skillets, Dutch Oven, Frying Pan, Griddles - No Assembly Required, 15.9'' H

  • 2 Pack - 5 Tier Pan Rack: The entire pan organizer is 15.9” height with two 2.5" slots, one 3.5" slot and one 5.5" slot to accommodate your larger saucepan.
  • You can easily stack smaller pans and skillets within one slot to save more space.
  • Heavy Duty Metal Construction: Made of heavy duty metal material, make sure to hold even your heaviest cast iron cookware.
  • Keeping your cast iron pans organized perfectly.
  • Anti-slip design: (1) There is a non-slip small silicone mat at the bottom of the rack. When you put the pot rack on the countertop, it will not slide back and forth.
  • (2) The package includes 15 black Non-slip tube buckles.
  • You can put 3 Non-slip tube buckles on the ring of each layer to prevent your pans from slipping off the rack, if you need better anti-slip effect.
  • Multi-Function: Perfect accessory for your kitchen.
  • Place the pan organizer rack vertically or horizontally to fit your space.
  • Easily stores skillets, pans, pots, griddles, dishes, trays, cast iron, and more.
  • Dimension: 10.6" L x 7.1" W x 15.9" H (with two 2.5" slots, one 3.5" slot and one 5.5" slot).
Check Stock

Toothbrush Holder with Toothbrushes Cleaning Function and U‘V Light, Wall Mounted Organizer for Bathroom with Built-in Fan, 5 Toothbrush Slots with Cover, Toothpaste Organizer, White.

  • [MULTI-FUNCTIONAL]:Our toothbrush holder contains lamp beads with cleaning function.Perfect for families,5 toothbrush slots, 1 toothpaste slot and 1 toothpaste squeezer clip.
  • The size of slots is suitable for most toothbrush and toothpaste in daily life. Save space, stay organized and refuse messy..
  • [Toothpaste Tube Squeezer Dispenser]-High quality plastics, not easily deformed. Easy to use.Push flattened end of tube into Squeeze it slot and pull through.Easy to get all of the toothpaste down to the end of the tube. Save your money,reduce waste..
  • [Hygienic and Dust-proof ]: The toothbrush slot comes with a dust cover to protect from dirt. Safe and hygienic, keeps your personal toiletries in a clean and sanitary space..
  • [VENTILATION DESIGN]: With a built-in fan added,the toothbrush holder can accelerate air flow in the cabin,keep our toothbrushes in a good environment..
  • [RECHARGABLE BATTERY]: Worried that there is no outlets in the bathroom? SARMOCARE rechargable toothbrush holder solves your worries.It is built in lithium polymer battery. About 4 hours charging by a USB cable can supports 25 times using. The item will stop automatically after 6 minutes while work cycle is finishing..
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

Tube Connector Adapter Weld Fabrication Bungs 1-3/4 .095 &.120 4

  • Fits 1-3/4" O.D Tube With 095 & .120 Wall I.D. Inline Tube.
  • Great weldable universal inline tube connector. Choice of many fab shops nationwide..
  • Versaslot allows you to run hardware either direction..
  • Machined slot holds nuts in place for easy tightening of hardware..
  • Sold as 2 connector halves / 2 Bolts / 2 Nyloc Nuts.
Check Stock

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

  • 【Round Die】- Thread size: M6 x 1.0mm.
  • Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
  • 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
  • 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
  • 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
Check Stock

CDM GEAR 20 Gage BMT Light Mount with 3 Slot Rail, Compatible with Remington 870 20ga. Only

  • PURPOSE - The CDM Gear BMT mount light mount holds the light between the barrel and magazine tube for fingertip actuation of lights on either the left or right side of the gun.
  • COMPATIBILITY – CDM Gear Light Mount fits Remington 20 gauge with 7/8" diameter magazine tube extension.
  • APPLICATION - The BMT mount with a single 3 slot rail for 12 gage guns can use optional 3 slot rails for mounting additional lighting or a laser on the other side.
  • INCLUDES – Comes with a single Swivel dock. Uses a single bolt to mount. Comes with all wrenches and 3M polyurethane no slip grip pads.
  • COMPOSITION – Machined from 6061-T billet aircraft aluminum, engineered for weight reduction and designed for a low, factory looking profile..
Check Stock

Orion 15094 Set of SkyQuest XX12 Padded Telescope Cases

  • Three soft cases designed to protect the optical tube sections of the SkyQuest XX12 Truss Tube reflector telescope during transport.
  • Includes padded cases for upper and lower reflector optical tube sections and a roll-up case for the truss poles.
  • Truss pole case has separate slot for each pair of poles to prevent direct contact among them, and rolls up to save space.
  • Cases are made of 600-denier polyester/nylon material, double stitched for extra strength.
  • Includes soft nylon cover to keep secondary mirror free of dust when scope is idle, and a large zippered pouch on the lower tube case provides a storage area for smaller accessories.
Check Stock

PM Company Color-Coded Coin Counting Tube for Pennies Through Quarters (05032), Blue;Green;Orange;red, Set of 4

  • Four color-coded tubes (ABA colors) for pennies through quarters. (Coin wrappers sold separately.)..
  • Insert wrapper, invert and coins are counted and wrapped in one exact roll..
  • Simply drop coins into tube until excess spills from slot..
  • Color-coded coin tubes (ABA - Federal Reserve Colors to match wrappers).
  • Simply drop coins into tube until excess spills from slot. Insert wrapper, invert and coins are counted and wrapped in one exact roll..
  • Four color-coded tubes (red, blue, green and orange) for pennies through quarters. (Coin wrappers sold separately.)..
Check Stock

Orion 15102 Set of SkyQuest XX16g Padded Telescope Cases

  • Three soft cases designed to protect the optical tube sections of the SkyQuest XX16 Truss Tube reflector telescope during transport.
  • Includes padded cases for upper and lower reflector optical tube sections and a roll-up case for the truss poles.
  • Truss pole case has separate slot for each pair of poles to prevent direct contact among them, and rolls up to save space.
  • Cases are made of waterproof, 600-denier polyester/nylon material, double stitched for extra strength.
  • Includes soft nylon cover to keep secondary mirror free of dust when scope is idle, and a large zippered pouch on the lower tube case provides a storage area for smaller accessories.
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

MyGift Rustic Burnt Wood Wall Mounted Toothbrush and Toothpaste Holder with 5 Slots Bathroom Organizer Rack

  • Wall mounted toothbrush and toothpaste holder rack with rustic burnt wood finish.
  • Features 4 slots of storing toothbrushes and 1 large slot for storing a tube of toothpaste.
  • Burnt wood finish blends well with rustic and country style decors.
  • Keyhole brackets allow for flush mounting to wall surfaces (Mounting hardware not included).
  • Approximate Dimensions: Overall - 4.0 H x 8.75 W x 2.5 D.
  • Toothpaste Slot - 1.5 Diameter (in inches).
Check Stock