Categories

Best Rf Signal Amplifier

AD8318 Logarithmic Amplifier Multiplier Detector Module 1M-8GHz 70dB Dynamic ALC AGC Control

  • Application to RF transmitter PA setpoint control and level monitoring RSSI measurement in base stations, WLAN, WiMAX, and radars.
  • It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell.
  • The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage.
  • Small footprint LFCSP,Integrated temperature sensor,Fabricated using high speed SiGe process.
  • The AD8318 can be configured to provide a control voltage to a VGA, such as a power amplifier or a measurement output, from Pin VOUT.
Check Stock

Oumefar High Precision Logarithmic Amplifier Multiplier Detector AD8318 70dB Logarithmic Detector Dynamic ALC AGC Control

  • Application to RF transmitter PA setpoint control and level monitoring RSSI measurement in base stations, WLAN, WiMAX, and radars.
  • The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage.
  • It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell.
  • The AD8318 can be configured to provide a control voltage to a VGA, such as a power amplifier or a measurement output, from Pin VOUT.
  • Small footprint LFCSP,Integrated temperature sensor,Fabricated using high speed SiGe process.
Check Stock

Maxmoral 6pcs EI14 Audio Transformers 600:600 Ohm Europe 1:1 High Efficiency Isolation Transformers

  • ✔【IMPROVE TV ANTENNA SIGNAL】Ground loop isolator made from premium materials, fits any 75 ohms coaxial （TV antenna or amplifier ）and improves your signal, giving you crystal clear hdtv every time..
  • ✔【ELIMINATING BUZZING NOISE】Noise Eliminator can eliminate audio hum/buzz/noise and horizontal scrolling bars caused by ground loops. Keep your sound system and video No more Hum/Buzz/Noise, No More Rolling Line..
  • ✔【SUPERIOR RF PERFORMANCE】Isolator shows superior RF performance operating at a frequency range of 5-1218MHz. Fits any TV antenna or amplifier(2-pack suitable for family use）..
  • ✔【PROVIDE 6KV LIGHTNING PROTECTION】The Isolator eliminates ground loops,prevent lightning strikes and provides a degree of protection for electronic equipment..
  • ✔【HUMANITY DESIGN】Metal shell is made of copper and shielding layer, environmentally sealed against moisture and humidity. Compact size, can be directly connected to electronic devices such as cable TV, cable box or video camera..
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

VMM860 Fixed Channel Modulator Module (VMM860 Fixed Channel Modulator Module (Ch 87))

  • RF Modulator RCA to Coax - Convert CVBS RCA signals into analog TV ( RF )signals which have ultra long distance transmission to achieve sharing program videos / pictures on other tvs in diffrent rooms or farther away from the AV video source.
  • It's a great long range signal booster amplifier modulators !.
  • AV to RF - Supports NTSC TV format which is most popular in North America ! One click to switch channel 3 and channel 4 by this VHF televisions demodulator ..
  • RF Modulator - No drivers, adapters needed, plug and play , easy to use.
  • You will get more benefits and convenience while saving a lot on your local CATV system..
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock

Holland Electronics HMM-10H Commercial Grade RF TV Micro Modulator

  • ...brightness of the picture for your old tv easily !.
  • AV to RF - Convert CVBS RCA signals into analog TV ( RF )signals which have ultra long distance transmission to achieve sharing program videos / pictures on other tvs in diffrent rooms or farther away from the AV video source.
  • It's a great long range signal booster amplifier modulators !.
  • RF Modulator - No drivers, adapters needed, plug and play , easy to use.
  • You will get more benefits and convenience while saving a lot on your local CATV system..
Check Stock

ZeeVee ZvPro820i HD Video Distribution QAM Modulator Over Coax 1080p

  • ...brightness of the picture for your old tv easily !.
  • AV to RF - Convert CVBS RCA signals into analog TV ( RF )signals which have ultra long distance transmission to achieve sharing program videos / pictures on other tvs in diffrent rooms or farther away from the AV video source.
  • It's a great long range signal booster amplifier modulators !.
  • RF Modulator - No drivers, adapters needed, plug and play , easy to use.
  • You will get more benefits and convenience while saving a lot on your local CATV system..
Check Stock

25ft KMR400 Coax Extension Cable N Male to N Male Connector 50 Ohm Low Loss Coaxial Cables for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or Phone Signal Booster Use Not for TV

  • ...nect the adapter and the coaxial cable . And the length is up to 2.2 in that is longer than others which would prevent the code coming off..
  • Compatibility: This ultra low-loss 400 n cable is designed to work with all devices and appliances with 50-Ohm impedance. Works for any 50 Ohm RF system. Such as an antenna and amplifier,and they can be used inside building or outside buildings. It enables perfectly secure connections between an amplifier to both indoor or outdoor antennae, taps, splitters..
  • Professionally Made: XRDS -RF is a professional manufacturer in producing coax cable. This n to n jumper is swept with USA KEYSIGHT E5071C ENA network analyzers to assure the vswr of the cable less than 1.1. XRDS -RF is committed to improving the lives of our customers, and this cable will give you unmatched product quality. All of our items come with a full year of warranty..
Check Stock

Yuhoo UHF Modulator, Mini TV Link Modulator,TM70 AV to RF Converter with Channel Display, PAL/NTSC Optional Digital Modulator USB Plug & Play(Black), free size

  • COLOR CODED CONNECTORS: YELLOW (VIDEO), RED and WHITE (AUDIO).
  • Built-in RF amplifier to maintain signal QUALITY.
  • Compatibility with all standard consumer video and security devices and cable TV and satellite TV.
Check Stock

TV Wireless Earbuds

  • CUSTOMIZE THE TV SOUND FOR BEST FIT - Select TONE(Treble/Normal/Bass) to find the optimum sound frequency to hear the target audio clearly. The BALANCE control is specifically designed for people with different hearing levels in the left and right ears..
  • LONG BATTERY LIFE, PERSONAL SOUND AMPLIFIER - One full charge supports approx 15 hrs working (varies by volume level and content). The personal sound amplifier mode enables you hear what people are talking to you nearby without taking off the headphone..
  • IMPRESSIVE DURABILITY AND FLEXIBILITY - Wireless TV Headsets for seniors or hard of hearing with durable materials at the headset arms for adjusting to comfortable shape. Super-soft memory foam eartips plus ear loops make you feel much more relaxing..
Check Stock

Antop Low-Loss 2 Way Coaxial Splitter for TV Antenna and Satellite 18K Gold-Plated Chassis 2GHz - 5-2050MHz All Port DC Power Passing

  • 【Low insertion loss】: high Return loss and isolation for better performance on TV and satellite signal.
  • 【Fast and easy installation】: Reference pictures to connect. Note that the amplifier is properly connected.
  • 【5-2050Mhz (2Ghz) frequency range】: compatibility with all digital ready RF signals.
  • 【18K gold-plated chassis】: precision Zinc die-cast for maximum signal transfer and corrosion resistance.
  • 【High shielding structure】: lower digital noise and higher signal quality.
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock