HDMI to RF Conversion Box,HDMI to RF Coaxial Converter Adapter,Output TV/RF Signal Frequency is 61.25MHZ,Long-Distance Signal Transmission,Remote Control to Adjust Output Data

  • REMOTE TRANSMISSION: View DVD / games / set-top box (Hami signal source devices) on regular or old TV and remote signaling is not possible over coaxial cables. The converter outputs analog signals instead of the ATSC format..
  • OUTPUT FREQUENCY: The output frequency of the TV / RF signal is 61.25 MHz. Please use the TV's channel search function to get the signal, then press "SYS" to set the system (PAL or NTSC) to match the TV until you get a clear picture and sound..
  • SUPPORT RESOLUTION: The RF converter can easily help you convert the HDMI signal to the RF signal, easy to use. This device cannot work backwards. Supported HDMI input resolution: 480I / 480P / 576I / 576P / 720P / 720I / 1080I / 1080P..
  • ADJUST THE DATA: The output image quality is lower than that of the analog RF signal (more like 480p). Use the remote control to adjust the output image and amplitude including brightness, contrast and chroma..
  • NOTES AND CUSTOMER SERVICE: If you have any questions or dissatisfaction with our products, please feel free to contact us, we will advise sincerely..
Check Stock

YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms

  • AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF signal power detection.
  • -55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF signal, so that the RF signal is converted to DC voltage output.
  • APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring.
  • Power monitoring in a radio line transmitter.
  • RSSI measurements in base stations, WLAN, WiMAX, and radar.
  • 55dB---The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB.
  • WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency signal detection, signal power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control.
Check Stock

Shure PA411 Four Port Antenna Combiner

  • Distributes DC power and RF signal while reducing rack clutter for up to four PSM300 systems.
  • Features a wideband 470-865 MHz frequency range.
  • Main RF output connector connects to any antenna with a BNC connector.
  • RF LED indicators display signal present and signal overload per input.
  • Power output distributes DC power to PSM transmitters (accessory power cable required).
  • Includes PA411, rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable, and user guide.
Check Stock

Wifi Signal Strength Meter

  • Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave.
  • Displays signal level, peak level, and a fast indicator bar (for pulse monitoring).
  • AC magnetic, AC electric, RF/Microwave (measures total RF signal but NOT frequency).
  • AC fields: can measure standard measurements or weighted (proportional to current induced in the human body).
Check Stock

Radioactive Fallout Radiation Tshirt - Small Print

  • Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave.
  • Displays signal level, peak level, and a fast indicator bar (for pulse monitoring).
  • AC magnetic, AC electric, RF/Microwave (measures total RF signal but NOT frequency).
  • AC fields: can measure standard measurements or weighted (proportional to current induced in the human body).
Check Stock

Five Star LTE Filter Improves TV Antenna Signals - HDTV Antennas Signal Purifier - Filters 4G Signal for a Clear Channels - Reduces Interference from Cell Towers - Pass Frequency 5-599Mhz

  • FILTERS ALL 4G LTE SIGNAL NOISE - Our LTE filter removes all noise caused by 4G cellular signals, letting through only TV signal frequencies between 5-599MHz, which allows you to experience quality, crisp TV with no cellular interference..
  • 4G LTE Filter - IMPROVES TV ANTENNA SIGNALS:4G lte filter removes noise for better picture.
  • Cleaning unwanted RF signal out of HDTV antenna system effectively. HDTV Band-pass filter can remove interference from frequency bands(3G/4G) outside the TV band. It can improve the TV signal..
  • Improves over the air signals by filtering out mobile LTE signal interference (3G and 4G) which can cause intermittent TV signal disruption including weak signals..
  • Simple installation - lte filter for antenna no external power supply required.Head connected to the antenna, tail connected to antenna amplifier or tv. LTE Filter, made only from premium materials, fits any TV antenna or amplifier and improves your signal, giving you crystal clear HDTV every time..
  • WORK FREQUENCY: Pass Frequency:5-599MHz. Cleaning unwanted RF signal out of HDTV antenna system effectively,Signal loss is 3dBi or less. Impendance: 75 Ω.
Check Stock

WGP Hidden Camera Detectors, Hidden Devices/Bug/Anti Spy/Listing Device/GPS Tracker/RF Detector, 5 Sensitivity Levels, 25H Working Time, Home Office Travel

  • 【Superior Detection Technology】 Hidden Camera Detector can detect radio waves, 2G, 3G, 4G mobile signal, SIM card bug. Frequency detection range 1Mhz - 6.5Ghz. 2 working modes: Sound and Vibration..
  • 【Versatile Protection】 Camera detection, GPS magnetic field signal detection, RF wireless signal detection. Can effectively prevent your privacy leaks..
  • 【Fast & Enduring】 Rechargeable lithium-ion battery, one hour fast charging, up to 25 hours of use per full charge. This rf detector serves as a reliable privacy protector or handy travel companion..
  • 【Adjustable Sensitivity】 With upgraded ultra-sensitive chips, 5-Levels adjustable threshold, Large range of frequency detection. 5-segment bargraph indicator Physical attenuator provides ability to locate strong RF sources..
  • 【Lightweight】 Portable like a pen (only 21g), easy to carry and store. Perfectly for home, office, travel, car and etc..
Check Stock

HDMI to RF Coaxial Converter Box, 1080P Video Adapter Support Input HDMI Resolution: 480I/480P/576I/576P/720P/720I/1080I/1080P(US Plug)

  • 【HDMI to RF Converter】The RF converter can easily help you convert HDMI signal to RF signal, easy to use. HDMI to Coaxial Cable Adapter for TV. With the remote control, you can adjust the output screen and amplitude including brightness, contrast, and chroma..
  • 【HDMI Source Devices to Your Old TVs】Display DVD/game/set top box (HAMI signal source device) on normal or old TV, long distance signal transmission via coaxial cable. The converter outputs an analog signal instead of ATSC format..
  • 【How to Use it】The output TV/RF signal frequency is 61.25MHZ. Please use the search channel function of the TV to get the signal, then press "SYS" to adjust the format (PAL or NTSC) and correspond to the TV until you get clear picture and sound..
  • 【Note】The output image quality will be lower than the RF analog signal (more like 480p). This device cannot work in reverse. Support input HDMI resolution:480I/480P/576I/576P/720P/720I/1080I/1080P..
  • 【After Sales Service】If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

FC-3000P Ham Radio CB Frequency Counter 27Mhz-3000Mhz - High Sensitivity with CTCCSS DCS Decoder for The VHF & UHF - CB Continuous Carrier Signal, Walkie-Talkies, DMR Radio Transceivers

  • ✔️ IDENTIFYING FREQUENCY - The frequency meter measures frequency parameters of the continuous carrier signal walkie-talkies , with signal strength indicator..
  • ✔️ PORTABLE FREQUENCY COUNTER - Counting continuous wave signal comes from Two-way Radio. VHF & UHF frequency measurement, useful for the CB amateur Ham Radio..
  • ✔️ FREQUENCY COUNTER METER RANGE - CB, HAm Radio, DMR frequency range 100Mhz-3000Mhz. Build-in DCS CTCSS Decoder Low PPM crystal time base used to achieve high accuracy measurement.
  • ✔️ EASY TO OPERATE - User friendly controlled with four buttons. The DMR radio frequency counter is compact and handy when needed..
  • ✔️ 100% MONEY BACK GUARANTEE 2 YEARS WARRANTY ensures this will quickly become your favorite no-risk purchase..
Check Stock

Anysecu SF-103 A-SF103 Portable Frequency Counter 2MHz - 2.8GHz for Two Way Radio Upgrade Version of SF401

  • ...ength reflection optical observation and RF signal detection, make the invisible cameras visible.
  • RF SIGNAL DETECTION -- Wireless surveillance cameras, tracking devices and 2G, 3G, 4G SIM card bugs, GSM listening devices, magnetic locator, bugs can be detected via RF radio frequency antenna. Users can adjust the signal sensitivity by knob according to actual needs. The threshold is adjustable, frequency detection range is large.
  • MAGNETIC SIGNAL DETECTION -- Can detect magnetic locators, hidden bugs and GPS trackers installed on convert place in your car with magnetic field probes. MAG mode must insert and tighten the magnetic probe, adjust the signal to the 4-6 grid balance point, the alarm sound will stop.
  • WIDE APPLICATIONS -- can be used to find hidden cameras and listener search in homes, offices, hotels, motels, bathrooms, locker rooms, business negotiations, confidential meetings, government agencies, and to find GPS tracker in car, or as a scanner for daily use to prevent sneak shots and monitor magnetic field signals. Stay vigilant for your partner, family, business, and provide privacy protection.
Check Stock

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

  • RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
  • Turn on the tracking source output bandwidth 33mhz---3000mhz.
  • Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
  • Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
  • Computer operating system: Winxp, Win7, Win10.
  • 35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
  • Signal Tracking Source Module with Shell. Sweep Step: ≥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
  • -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability..
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock