Categories

Best Rim Saw Blades

Delta Diamond Boss Hog Turbo Premium Diamond Blade for Masonry, Concrete, Dry Cutting, Continuous Rim (5-inch 3-Pack)

  • PREMIUM TURBO DIAMOND RIM - Premium diamond rim for high performance, fast cutting, and an extended tool life. Boss Hog Turbo Premium blades are ideal for when you need to leave a smooth, clean finish. Cooling holes keep the blade cool for increased performance..
  • CHIP FREE WET OR DRY CUTTING - Guaranteed to withstand the demands of dry cutting. Ideal for cutting masonry, concrete, stone, brick, block, and similar materials..
  • GENERAL PURPOSE - Great cost effective general purpose continuous rim turbo blade for your household angle grinder or saw..
  • SPECIFICATIONS - 3 Pack of 5" diameter X .080 thick X 7/8"-5/8" Arbor. Fits on most hand-held angle grinders or hand-held circular saws. Check your saw's arbor and blade capacity to be sure. The maximum safe operating speed is 12,200 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 7 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 5/8 Arbor - BPT7

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

GALAX PRO Circular Saw Blade 7 1/4\(185MM) 24 Tooth and 48 Tooth Tungsten Carbide Tipped Circular Wood Cutting Saw Blade with 5/8\(16mm) Arbor for Wood Cutting(Pack of 2)

  • This TCT Circular saw baldes are designed as general cross cut blades. The 24 tooth blade is used for frame cutting of soft woods, pressure treated lumber and MDF.
  • The 40 tooth blade is best used for smooth finely finished cuts in plywood.
  • Cutting blade is made of tungsten carbide tip.
  • Tungsten carbide teeth provide excellent wear and heat resistance.
  • Positive cutting angle which provides fast and efficient removal of chips and swarf, cutting smoothly.
  • Delivers accuracy and resists bending and deflection for true cuts.
  •  Heat expansion slots allow the blade rim to expand and contract without warping for straight and accurate cuts and minimize heat and vibration.
  • 7 1/4 inch circular saw blades are ideal set for all your cutting needs.
  •  Both blades have a 5/8 inch arbor to fit circular saws and miter saws that require this size blade.
  •  Also suitable for GALAX PRO GP76331 and GPL12367 circular saw.
  • What you get: 1* 24T tungsten carbide tipped circular wood cutting saw blade, 1* 48T tungsten carbide tipped circular wood cutting saw blade, 1* Information Card.
Check Stock

Lackmond Beast Pro Hard Porcelain Turbo Saw Blade - 5 Hard Tile Cutting Tool with Narrow Slot Turbo Rim & 7/8 - 20mm - 5/8 Arbor - BPT5

  • TURBO CONFIGURATION – For precise cuts in hard porcelain and ceramic tiles. The Turbo blades are engineered with a thin, narrow slot-turbo rim which....
  • ALL PURPOSE – Suitable for use on all types of ceramic and porcelain tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • WET OR DRY SAW BLADE – 4”-7” blades for wet use only. 7”+ can be used both wet and dry.
Check Stock

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • ...ile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness can keep staying original di....
Check Stock

Super Thin 7" Diamond Ceramic Saw Blade Porcelain Cutting Blade for Cutting Ceramic Or Porcelain Tile

  • ...m edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts..
  • 【Widely Applications】: Our Grinder blade can be available used as porcelain tile blade, ceramia tile blade, granite blade, diamond blade and other thin masonry blade. Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.（Take good care of your eyes/ears/face/hands/body/etc）.
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

CMT 299.101.00 2 pcs of Saw Blades Stabilizers, 3-Inch Diameter with 5/8-Inch Bore

  • 3-Inch Diameter, 5/8-Inch Bore, suitable for 8-Inch saw blades..
  • 2 stabilizers that virtually eliminates rim vibration to make cleaner, straighter cuts..
  • They also reduce noise caused by vibrations and extend your saw blade life..
Check Stock

10\ inch Diamond Lapidary Saw Blade Ultra-Thin Rim 0.55mm Cutting Disc Jewelry Tools for Stone

  • Product Name: 10 inch lapidary saw blades, Gem stone cutting saw, Trim saw blade lapidary.
  • Designed for processing materials for softer high value rocks like turquoise, gaspeite, opals.
  • Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption.
  • Very good cost effective option for those that want either very thin kerfs or plan on short term use.
Check Stock

SHDIATOOL Diamond Saw Blades Cutting Discs Set Segmented Cutter Wheel for Tile Ceramic Porcelain Marble 7/8\ or 5/8\ arbor 6 Pieces 4-1/2 Inch

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8"),sutiable for angle grinder.
  • Blades Kit contains: continuous tile blade/segmented concrete disc/turbo rim granite saw bladeper 2 pieces.
  • 2 pieces continuous rim wheel For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 2 pieces segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 2 pieces turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

LIGHTIMETUNNEL 25 PCS Oscillating Saw Blades Universal Metal Wood Multitool Quick Release Tool Saw Blades Fit Black & Decker Porter Cable Dewalt Milwaukee Chicago Rockwell Makita Craftsman

  • ▶▶Universal Compatible Tools : Our 25 Pack quick release saw blades are compatible with many oscillating tools on the market, such as Black & Decker, Makita, Ryobi, Chicago, Craftsman, Fein Multimaster, Milwaukee, Hitachi, Dewalt and More..
  • ▶▶Widely Use Range: LIGHTIMETUNNEL Oscillating saw blades kit contain 7 different types of standard saw blades and precision saw blades-with standard tooth, japanese tooth and precision tooth. Each type of oscillating saw blade is specific for a particular purpose. Ideal for fit for cutting wood, plastics, metals, sawing, cutting, scraping, sanding, shaping, polishing and removing grout and so. It also can meet a variety of needs, which could be used for workshop, household DIY or other place..
  • ▶▶High Quality Saw Blades Set: Our oscillating tool blades are made of high carbon steel and stainless steel, adopting electroplating technology in saw blades surface coated black finish which protects against corrosion.It's featured high heat resistant material and excellent weld technology, which makes our saw blades tougher, wear, resistance and long-lasting, easy cutting and long service life..
  • ▶▶Precision Cutting Design: Built-in length markers on two sides, one side is Inch and other is Millimeter, ensure....
Check Stock

Delta Diamond Piranha Premium 7 Inch Tile Diamond Saw Blade, Continuous Rim, DM-7/8\-5/8\ Arbor, Dry or Wet Cutting Porcelain & Ceramic Tiles (7\)

  • PREMIUM TILE DIAMOND BLADE - Made with higher levels of diamond compared to other diamond blades for professional use. Engineered to provide smooth finishes on porcelain, ceramic, marble, granite, and similar materials..
  • CHIP-FREE CUTTING - Continuous rim design formulated with high-grade diamonds allows for smooth chip-free cutting..
  • PROFESSIONAL-GRADE QUALITY - Piranha blades are ideal for professionals who need reliable cutting for every job while still being a great value..
  • SPECIFICATIONS - 7" diameter X .060 wide X DM-7/8" arbor. Includes preinstalled 5/8" bushing. Will fit just about any hand-held angle grinder, circular saw, tile saw or trim saw. Max safe rpm is 8,730. Wet or dry cutting. If blade becomes dull, we recommend running the blade through a dressing stone or paver to expose new diamonds..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free....
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
  • Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
  • These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....
Check Stock