Categories

Best Ring Joint Face Flange

24\x24\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (4 Each)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

ForeverPRO WRFT02 Universal Extra Thick Toilet Wax Ring Replacement Kit for Floor Outlet Toilet Bowl with Black Rubber Flange Funnel Water Tight Seal Gasket Accommodates 3 Inch and 4 Inch Waste Lines

  • ✅ Compatible with most floor outlet toilets. This toilet seal ring is ready to use. Will not harden or deteriorate. Forms a water-tight seal. Toilet wax seal used with almost any toilet bowls.
  • ✅ ForeverPRO soft and flexible high-grade wax toilet ring seal. Extra thick double wax toilet ring. Comes with One Year Warranty Guarantee or no questions asked 90 day return.
  • ✅ Durable Premium Universal wax ring for toilet seal bowl with black rubber flange funnel water tight seal. Comes brand new in original retail packaging.
  • ✅ Toilet wax seal ring kit has all necessary accessories including toilet wax ring, 2 brass bolts, 2 retainer washers, 2 metal washers, 2 locking nuts and 2 caps for easy DIY Installation.
  • ✅ Directions: 1. Set the toilet bowl upside down on a soft non-abrasive surface. Place the ForeverPRO toilet gasket ring firmly in place around the discharge opening (with the polypropylene flange pointing away from the bowl). 2. Carefully lift the bowl over the toilet flange, line it up with the flange bolts and set it in place. Twist the bowl slightly to spread the wax gasket and use your body weight to seat the bowl on the floor. 3. Tighten the flange bolts, but do not over tighten.
Check Stock

MENNTY Toilet Flange with Wax Ring for Toilets Replacement Kit includes Bolts PVC Toilet Flange Repair Kit for 3" or 4" Pipes, Fit Toilet Install & Repair

  • [Fits 3-inch or 4-inch Waste Lines] Toilet flange with wax ring for any NEW installation or REPAIR on 3-inch and 4-inch waste lines/ drain opening. Toilet wax ring replacement kit made repairing a leaky or wobble toilet and cracked flange easy..
  • [Easy to install, without the help of a plumber] Install toilet flange repair kit at or above floor level,without the help of a plumber can be repositioned without damaging seal.
  • [Assures a Perfect Seal]This toilet wax ring provides good deodorization and high viscosity, and is easy to form an airtight, deodorant, and waterproof seal and perfect solution to deal with unpleasant odors and leaks caused.
  • [Product Specifications] Toilet flange-diameter:6.88 in,thickness:0.43 in.Toilet wax ring-diameter:5.4 in,thickness:0.92 in.Package includes bolts, washers, retainers, nuts and bolt caps..
  • [Service] If you are installing of new floor mount toilet install or repair the old toilet,choose our toilet flange with wax ring. We always focus on product design and customer service.30-Day full refund and 1-Year Limited Service for you..
Check Stock

VCT Pneumatic Auto Body Air Punch & Crimper Crimping Flange Flanger Tool Pipe

  • This tool works as both an air punch and air flange for auto body repair at the shop or home garage! The air flange has a versatile head that rotates 360 degrees to easily crimp flanges or lap joint sheets and pipes. The punch can create 3/16 in. holes for fastening and welding..
  • Heavy duty head rotates 360° to easily crimp flanges or lap joint sheets and pipes.
  • Punches accurate 3/16 in. holes for fasteners or welding.
Check Stock

Danco 10672X Flange Repair, small

  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange..
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars..
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom..
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction..
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts.
Check Stock

Sterling Seal 9000IR20316PTFE300x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 20\ Pipe, Pressure Class 300#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR6316PTFE1500x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 6\ Pipe, Pressure Class 1500#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR2316PTFE1500x48 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 2\ Pipe, Pressure Class 1500#, Green Band with White Stripe (Pack of 48)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR18316PTFE600x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 18\ Pipe, Pressure Class 600#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR3316PTFE300x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 3\ Pipe, Pressure Class 300#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR24316PTFE1500x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 24\ Pipe, Pressure Class 1500#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR1316PTFE600x96 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 1\ Pipe, Pressure Class 600#, Green Band with White Stripe (Pack of 96)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Sterling Seal 9000IR10316PTFE150x24 316L Stainless Steel Spiral Wound Gasket with 316SS Inner Ring and PTFE Filler for 10\ Pipe, Pressure Class 150#, Green Band with White Stripe (Pack of 24)

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock