Best Rj45 Ports - TopShopReview.com

Belkin Wireless N Router + 4-Ports Older Generation

Wireless standards: IEEE 802.11n draft 2.0.
Ports: 4x computer/device ports (RJ-45), 1x modem port (RJ-45).
Link rate: Up to 300 Mbps in 40 MHz channel mode.
System requirements: Broadband Internet connection with RJ45 (Ethernet connection).
at least one computer with an installed network interface card.

CPU (Included): Intel Xeon D-1518 Processor.
Memory: 4x DDR4-2133/ 1866/ 1600MHz DIMM Slots, Support up to 128GB ECC/REG Memory or up to 64GB ECC/Non-ECC Unbuffered Memory.
1x M.2 Slot (M key 2242/2280, PCI-Express 3.0 x4).
SATA: 6x SATA3 Ports, Supports RAID 0, 1, 5, 10 RSTe.
Ports: 2x USB 3.0 Ports, 4x USB 2.0 Ports (via headers), 2x RJ45 LAN Ports, 2x RJ45 10Base-T Ports, 1x RJ45 Dedicated IPMI LAN Port.

CRS312-4C+8XG-RM Mikrotik first product with 10G RJ45 Ethernet ports. It has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection.
Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.
CRS312-4C+8XG-RM switch is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on.
It has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.
This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps.

Memory: 4x 240pin DDR3-1600 DIMM Slots, ECC, Unbuffered, Max Capacity of 32GB.
Slots: 1x PCI-Express 3.0 x16 Slot (runs at x8), 1x PCI-Express 3.0 x8 Slot, 1x PCI-Express 2.0 x8 Slot (runs at x4).
Ports: 2x USB 3.0 Ports (1 via header, 1 Type A), 6x USB 2.0 Ports (4 rear,2via header), 1x VGA Port, 2x Serial Ports (1 rear,1via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port.

10G PORTS: This 6-Port 10G switch offers two 10G ports for high-speed network connections providing a cost-effective solution in adding 10G link capability..
2.5G PORTS: Equipped with four 2.5GBASE-T RJ-45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling..
SWITCHING CAPACITY: The 10G switch has a 60Gbps switching capacity..
WALL MOUNTABLE: Well-suited for desktop installations, but also features convenient wall mountable design for greater installation flexibility..

Memory: 4x 204pin DDR3-1600 SODIMM Slots.
Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x8, 1x PCI-E 2.0 x4.
Ports: 4x USB 3.0 ports, 6x USB 2.0 Ports, 1x VGA Port, 2x Serial Ports, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port.

Device Type: Ethernet Switch, Form Factor: Rack-mountable.
Includes eight Power over Ethernet Plus (PoE+) RJ45 10/100/1000BASE-T autosensing ports, two dual-personality ports (either Small Form-factor Pluggable (SFP) or RJ45 10/100/1000BASE-T autosensing ports), and DC power connector.

Provides both secure IPsec site-to-site tunnels and IPsec secure access for remote clients.
Includes denial-of-service (DoS) protection, stateful packet inspection (SPI), URL keyword filtering, logging, reporting, and real-time alerts Specifications.
LAN ports - Eight (8) 10/100/1000 Mbps auto-sensing, Auto Uplink RJ-45 ports.
one LAN port can be dedicated hardware DMZ port.
WAN ports - One (1) 10/100/1000 Mbps auto-sensing, Auto Uplink RJ-45 ports to connect to any broadband modem, such as DSL or cable.

Layer 3, PoE switch with (8) 2.5GbE, 802.3at PoE+ RJ45 ports and (2) 10G SFP+ ports.
(1) 1.3" LCM color touchscreen with AR switch management.

Layer 3, PoE switch with (48) 2.5GbE, 802.3at PoE+ RJ45 ports and (4) 10G SFP+ ports.
(1) 1.3" LCM color touchscreen with AR switch management.

8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
2x20pin expansion pin header, pin height 10mm/0.39".
Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).