Categories

Best Rmr For Glock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock

Ade RD3-009 Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
  • fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45....
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included). Waterproof..
  • Comes with a picatinny mounting plate pre-assembled.Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass....
  • This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....
Check Stock

Outerimpact Red Dot Adapter/Mount for Glock Pistol - M.R.A

  • Compatible Guns: All Glock models except MOS verions.
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1272.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Ade Advanced Optics RD3-023 Valkyrie 4 MOA Green Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.…

  • ...h RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO..
  • The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
  • Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
  • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight..
  • For non-optics ready pistols that need to ....
Check Stock

TRUGLO TRU-TEC Micro Red Dot Sight Open Reflex Optic, Red Dot, Picatinny Mount

  • 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings.
  • TRUTEC MICRO mounts to optic-ready pistols using a common mounting plate bolt pattern. The optic co-witnesses with suppressor-height or high-profile sights. Fits Glock MOS and similar systems.Does not fit RMR specific slide cuts unless you use the RMR specific TRU-Tec Micro (TG8200B)..
  • Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum.
  • Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design).
Check Stock

Ade Advanced Optics rd3-012-G-1 6MOA Green Dot Micro Mini Reflex Sight for Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
  • This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes....
Check Stock

Glock 19 IWB Holster - USA Made - Fits Glock 19 19X 32 44 45 (Gen 3, 4, 5) 23 (Gen 3, 4) - Klipt IWB Holster by Blade-Tech Holsters, Inside Waistband Concealed Carry (Right Hand)

  • USA Made: Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Glock 19 Holster has a superior fit to Kydex. Carry Confident and conceal your Glock 19, 19X, 25, 44, 45 (Gen 3, 4 ,5), 23, and 32 (Gen 3 and 4) securely and comfortably..
  • East On / Easy Off: This one piece IWB G19, G19X, G23, G25, G44, and G45 Holster makes it simple to attach to your belt with an easy on / easy off 1.5" belt clip. The Klipt IWB Holster is a great option for everyday IWB concealed carry of your Glock 19, 19X, 25, 44, 45 (Gen 3, 4 ,5), 23, and 32 (Gen 3 and 4) without all the bulk..
  • Positive Lock Trigger Guard: The Klipt IWB Holster for the Glock 19 is designed with built in retention and a positive trigger lock guard so your firearm stays secure with no adjustments needed. Its minimal design means no tightening or loosening screws for retention..
  • Optics Compatible: Out of the box, the Klipt IWB Holster for the Glock 19 is compatible with most optics platform....
Check Stock

3D Metal Rear Slide Cover Back Plate for Gen 1/2/3/4/5 Glock 9mm/10mm/.40/.45/.357/.380/.22lr Magazine Accessories, Black Skull Red Eyes

  • Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot).
  • Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
  • Attaches firmly to your firearm for sure performance in tactical situations.
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock

CWC Holsters Fits Glock 43/43X TLR6 RMR Cut Gun and Magazine Combo Holster - Mod Wing/Claw Included - Various Color Options

  • This custom pistol holster for Glock 43/43X TLR6 RMR Cut Gun and Magazine Combo Holster comes in various color options..
  • A secure belt clip helps tuck away our holsters for pistols inside your waistband to improve firearm safety and security when you’re on the move..
  • These concealment holsters come in options of right or left-handed grips to provide faster firearm accessibility with adjustable ride height and cant....
  • We offer enhanced customization with cuts for RMR / red dot sights, threaded barrel cuts, and compensator cuts to provide more reliable and effective....
  • Made right here in the USA our conceal carry holsters for men and women are backed by a lifetime warranty to ensure high-quality reliability you can....
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

TRUGLO TFX Tritium and Fiber-Optic Xtreme Handgun Sights for Glock Pistols, Standard Height, Glock 17/17L, 19, 22, 23, 24 and more

  • 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings.
  • TRUTEC MICRO mounts to optic-ready pistols using a common mounting plate bolt pattern. The optic co-witnesses with suppressor-height or high-profile sights. Fits Glock MOS and similar systems.Does not fit RMR specific slide cuts unless you use the RMR specific TRU-Tec Micro (TG8200B)..
  • Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum.
  • Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design).
Check Stock