Categories

Best Rmsc Mounting Plate

Ade Advanced Optics Spike (RD3-018) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness..
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
Check Stock

Ade Advanced Optics Spike Red Dot Sight for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS,Springfield Hellcat(OSP/PRO)

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness..
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
Check Stock

Ade NUWA 2MOA Micro Red Dot for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC Mete SFT Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular....
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the....
  • 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Outerimpact Micro Red Dot Adapter for Springfield XD XD MOD 2 XDM XDS

  • Compatible Guns: XD, XD Mod 2, XDM, XDS, NON-OSP XDM Elite (will not work with 5.25).
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Holosun 407k/507k, Sig Romeo Zero, Shield RMSc, Swampfox Sentinel, JPoint, Crimson Trace 1550.
  • Coating: Anodize -- Finish: Black Anodize.
  • Mounting Hardware: (2) 6-48 Weaver T-10 Torx Head screws. (2) M3 x 8mm Flat Head Screws. (2) M3 x 6mm Socket Head Cap Screws. (2) M3x8mm Socket Head....
Check Stock

Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Trijicon RMR ADE Stingray Holosun HS407C/HS507C/HS508T Red Dot Sight…

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Cyelee CAT Shake Awake Micro Green Dot Sight, 3.5 MOA Reflex Sight for RMS/RMSC Footprint Optics Ready Pistol

  • ...Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, S&W Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade aluminum with recessed optic lens for added protection – IPX6 water resistant.
Check Stock

DPP Titanium Adapter Plate for Glock 43X/48 MOS Hellcat OSP Holosun 407k/507k

  • For Glock 43X/48 MOS with the RMSc optic cut to mount a Holosun 407K/507K, No need to modify the slide..
  • Fully support recoil posts design, durable, reliable..
  • .058″ thick,ultra Low Profile and lightweight, Easy to install..
  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish, mounting hardware included..
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.
Check Stock

DPP Titanium Optic Adapter/Mount Plate Compatible with MP Shield Plus Kimber R7 Mako Holosun 407K/507K

  • For MP Shield Plus Kimber R7 Mako with the RMSc optic cut to mount a Holosun 407K/507K, No need to modify the slide..
  • Fully support recoil posts design, durable, reliable..
  • .065″ thick,ultra Low Profile and lightweight, Easy to install..
  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish, mounting hardware included..
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.
Check Stock

Aootf Front License Plate Bracket- Universal Front Bumper License Plate Mounting Kit, Car Tag Holder Adapter& Black Aluminum Plate Cover, Anti-Theft Lock Screw Bolt, Caps, For US Vehicle Trailer Truck

  • Front License Plate Mounting Kit- plastic front license plate adapter and Black Aluminum license plate frame, for vehicles with contoured bumpers, mounting front license plates to a trailer or adding an additional novelty plate to any vehicle, or as a spacer recessed into the license plate area at the rear of the vehicle. For those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required.
  • Universal License Plate Bracket- Front license plate holder kit- 6 x 12 inch, suitable for standard novelty US or Canadian license plate mount. Durable and long lasting! 4-hole Aluminum License Plate holder black with slim edges, will not cover the license plate Registration information, legal street. Aluminum alloy material, light weight but strong and durable, durable, anti-corrosion, anti-rust, weatherproof.
  • Includes License Plate Screw Hardware Kit- Easy To Install-all the front license plate mounting hardware is included- plastic license plate bracket, license plate Aluminum frame, stainless steel license plate screws (including anti-theft license plate bolts), inserts nuts, screwdriver , black screw cap covers. No additional hardware is required to install in a flash..
Check Stock

Aootf Anti Theft License Plate Screws- Black Screws for Locking Car Tag, Frame and Cover, Mounting Hardware Kit for Front/Rear, M6 Stainless Steel Screws, Caps, Fasteners Nuts, Rattle Proof Pads

  • ...roof license plate hardware can securely lock license plate ,frames,covers. Plate screws security keep thieves away, protect car plate.
  • M6 (1/4″) Long Bolts Nuts In Bulk: In the screws bulk kit, we provide M6 screws: 5/8″(16mm) long license plate screws bolts. Metric 1/4″ screws are universal car license plate mounting accessories, suitable for most license plate mounting, including motorcycles, trucks, SUVs, etc. Long screws are suitable for combination installation of license plates, brackets, frames and covers. Included the pre-drilled front bumper license plate and the back trunk license plate holder.
  • Black License Plate Screws With Caps: Easy-to-install License Plate Mounting Hardware Kit, including license plate bolts, fastener nuts, black caps, and screwdrivers.License plate screws with caps cover the head of pan head screws very well, making your black car, license plate, frame cool and tidy. The black rattle proof license plate pads in the kit Paste on the back of the license plate to reduce the vibration and noise of the metal license plate and avoid scratching the paint of the car.
  • Quality After-Sales Service: Rust Proof, Theft Proof, Rattle Proof, the best choice to protect your license plate! Our license plate mounting kit is availabl....
Check Stock

GE WB56X10862 Genuine OEM Mounting Plate Assembly for GE Microwaves

  • The GE Appliances WB56X10862 Mounting Plate Assembly is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact....
  • Replacement GE Appliances Microwave Mounting Plate Assembly holds the microwave to the wall studs for installation above the range.
  • GE Appliances WB56X10862 Microwave Mounting Plate Assembly is also called the Mounting Bracket.
  • High quality GE Appliances OEM WB56X10862 Microwave Mounting Plate Assembly is manufactured with premium materials for durability and exact fit, be....
  • Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.
Check Stock