Categories

Best Rock Pi

Rock Pi 4 Plus Rockchip RK3399(OP1) Single Board Computer LPDDR4 4GB with WiFi 5 and Bluetooth 5.0 Support Twister OS (4GB RAM+64GB eMMC)

  • Class-Leading Performance-ROCK Pi has been upgraded to OP1 processor a modern and powerful hexa-core ARM based RK3399 Soc, which is equipped with LPDDR4 RAM and optional high performance onboard eMMC modules.The OP1 processor can deliver up to 100% performance improvement compared to previous designs.
  • Support Twister OS- Twister OS is to provide a true desktop computing experience for single board computers (SBCs). But you need to flash it by yourself. Twister OS includes themes, applications, tools, and optimizations to allow you to get the most out of your SBC.
  • Maker Friendly, IoT Connectivity-ROCK Pi features maker friendly expansion options, including a 40-pin GPIO interface that allow for interfacing with a range inputs from buttons, switches, sensors, LEDs, and much more.
  • Multi Storage eMMC module-Optional industrial compatible high performance eMMC module, 16G/32G/64G/128G available, TF card slot supports up to 128G.
  • M.2 connector supports up to 2T M.2 NVME SSD,running OS on SSD with SPI booting. GbE with PoE , QC 2.0 & PD 2.0 power Support.
  • AI Capabilities- ROCK Pi supports mainstream AI stack with GPU acceleration. Further more, a dedicated hardware NPU accelerator coming up next for ROCK Pi will boosts complex Machine Learning algorithm and red....
Check Stock

Rock PI X Model B Win10 in-tel Atom x5-Z8302 Single Board Computer (4G RAM+32G EMMC)

  • High Performance CPU -- ROCK Pi X features an In-tel Cherry Trail quad core processor Z8350, 64bit dual channel 1866Mb/s LPDDR3.
  • Rich interface -- Up to 4K@30 HDMI, 3.5mm jack with mic, 802.11 ac WIFI, Bluetooth 4.2, USB Port, GbE LAN, 40-pin color expansion header, RTC. Also, ROCK Pi X supports USB PD and QC powering.
  • Power supply -- The ROCK Pi X is powered by USB Type C port and supports a wide range of input voltage, from 9V to 20V.A dummy 9V or 12V power adapter with USB C tail will also work.
  • Note -- We don't suggest using a 5V only USB C power adapter. The board may boot but it will cause stability issue once the system load rises.
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ...powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices, such as smartphone, tablet... WARNING:Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time..
Check Stock

Data Visualization with Python for Beginners: Visualize Your Data using Pandas, Matplotlib and Seaborn (Machine Learning & Data Science for Beginners)

  • HIGH RESOLUTION – The 10.1 inch Raspberry Pi touchscreen LCD monitor (supports 10-Point touch) features high resolution of 1280*800 pixels and true-color image, giving you a truly immersive viewing experience..
  • PLUG AND PLAY – Just connect the control board and the screen by an HDMI cable and it can work immediately, needless of driver..
  • REAR FIXING – Adjustable fixing slots design for fixing most single board computers, widely compatible with Raspberry Pi 4B, 3B+, Zero, Banana Pi M5, Rock Pi X Model B, LattePanda V1, Orange Pi 4B and etc..
  • LESS WIRING – Configured driver board with multiple interfaces provides stable 5V/3A power output for the needs of the compatible boards, all the cables are designed with suitable length, neat and tidy when connecting..
  • NOT JUST A TOUCHSCREEN – Please refer to our online detailed toturial, where you can find the the 3D design drawing provided for diying your own case. Besides, we also share a variety of different plug-in and interesting projects when play with raspberry pi..
Check Stock

Eyoyo 7 inch Monitor, 7\ IPS Panel 1024x600 5-Points Capacitive Touchscreen Portable Raspberry Pi Monitor Screen Mini HDMI Monitor for Raspberry pi/Laptop/PC/Game Console

  • ...y Pi 4/4b/3/3b/3b/Raspberry Pi zero and more. Plug and play, driver free. The capacitive touch screen allows you to click or swipe any time, which is perfect for Raspberry Pi DIY enthusiasts..
  • 【Small Single Board Monitor】 - This single board monitor has wide compatibility and supports all kinds of pi, banana pi, Rock pi, BB Black, Raspbian, Kali Linux, Ubuntu, Kodi, Win10 IOT. Supports Windows 7/8/10/11 and other systems, driver free. In addition, it supports major consoles such as PS4, XBOX360, Switch and TV box, which is a powerful small portable monitor..
  • 【7 inch Second Monitor for PC】- This monitor has copy mode, extended mode and single board display mode for choose from, it can be easily connected to a PC or laptop, 7 inch mini size to save space but expand the work space, improve your work efficiency. This 7 inch mini monitor is easy to take anywhere is a great choice for work or enjoyment..
  • 【Small Touch Screen with Stylish Look】 - This touch screen comes with a foldable leather case that acts as a display holder while protecting the screen from drop. The stylish leather look fits youths, speakers, colleges and business people. Eyoyo provides one year warranty, please contact us at the first time when you have some problems durin....
Check Stock

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

  • Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
  • Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
  • This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
  • Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
  • Installation Video refer to Geekworm WiKi search X820.
  • Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
  • Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..
Check Stock

Xiwai SD Male Extender to SD Card Female Extension Cable Adapter Flexible SD/SDHC/SDXC UHS-III UHS-3

  • SD Male Extender to SD Card Female Extension Cable Adapter Flexible SD/SDHC/SDXC UHS-III UHS-3.
  • Length: 100mm approx. included connector..
  • Support UHS-I (full speed Up to 104MB/Sec) (High speed 52MB/Sec) Support UHS-II UHS-III (full speed Up To 321MB/Sec ).
  • Application: GPS , ROCK Pi 4 raspberry Pi SCM development board, Machine equipment and other needs to extend the SD card to the use UHS-II Extender cable..
  • Test: UHS-II SD card 270MB/s , test speed 250MB/s Connector: SD Male to SD Female..
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

ADT-LInk MicroSD TF Extension Cable Micro SD Extender Express Extender Cord Linker TF Card Reader Adapter for SDHC SDXC UHS-I Stable No FPC Card Reading Test Line Up to 104MB/s 15cm,B11SF

  • Use German patented imported wire, use high-quality gold-plated connectors, high-frequency support UHS-I stable transmission. The PCB is made of....
  • The thickness of the copper material is thickened to 1oz. The gold-plated connector has good electrical conductivity, which can reduce the lag or read....
  • Differential signal no via design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic....
  • Strengthen welding at the metal welding point during production. And put on the heat shrinkable tube protection, the product is sturdy and reliable,....
  • Application: GPS navigator, ROCK Pi 4 raspberry Pi MCU development board, machine equipment, etc. need to extend the SD card to use outside the....
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Accessory Set (Black)

  • INCLUDES: Use and Store Case (Black)--Vilros Raspberry Pi 4 Compatible Power Supply--Vilros 1.8M HDMI-MIcro HDMI Cable--Vilros Heatsink for Pi 4 (Set of 4)--Vilros Raspberry Pi 4 Quick Start Ebook Download Code--Screwdriver and Screws--DOES NOT INCLUDE A RASPBERRY PI MOTHERBOARD.
  • USE AND STORE: Designed for the Raspberry Pi 4 the Use and store case makes it easy to use your pi as well as store all your accessories when not in use--the case also features a preinstalled fan that is easily connected to the Pi.
  • POWER SUPPLY :The Vilros USB-C 5.1V 3A Power Supply was Designed for the Raspberry Pi 4 and Features a 5FT cable with an Inline ON/OFF Switch to make it easy to turn the Pi on and off.
  • HDMI-MICRO HDMI CABLE: The Vilros 1.8M HDMI/Micro HDMI Cable will connect your Raspberry Pi 4 Board to any HDMI monitor.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Case with Preinstalled Fan (Black)

  • VILROS PI 4 COMPATIBLE USE AND STORE CASE: Plastic Storage case is best for those who want to be able to store their raspberry pi in a convenient all in 1 package when not in use.
  • USE YOUR PI: Case Holds the Pi with full access to all the ports, in addition you can open the cover and access the GPIO pins for any project.
  • STORE YOUR PI AND ACCESSORIES :The case has enough room to store the power supply, cables and other pi essentials etc..
  • KEEP YOUR PI COOL: The case features a preinstalled fan on the cover that can easily be hooked up to the Raspberry Pi for maximum cooling and ventilation.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock