Categories

Best Rockler Coping Jig

Collins Tool Company Coping Foot

  • Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.
  • The Coping Foot is formed from 14 ga. plated steel. Youll wear out a couple of jig saws before you wear out your Coping Foot..
  • Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.
  • Will not work on Festool Carvex, get the Collins Festool Carvex Coping Foot instead.
Check Stock

Coping Foot，Foot Tool for Jigsaw Compatible with Most jigsaws，High Efficiency Woodworking Tools for Jigsaw

  • Fit for Most Jigsaw：Our Copying tools Fit for most jig saws except for Porter-Cable, and the Bosch 1590 and 1591. A variable speed jig saw is....
  • Improve You work Efficiency:Our Copying tools make your jigsaw become a simple and accurate coping machine without the need for jigs and....
  • Tough Steel Construction：Made of plated steel to last a lifetime.Our Coping Foot is formed from 14 ga.Size：4.4 x 3.4 x 1.2 inche Made in....
  • Easy To Install：Our Coping Foot is easy to install and remove to different kinds of jig saws with a few minutes. Easy to learn How to install Our....
  • What You Get：A Tough Steel Construction Coping Foot for Most Jigsaw.Simply email us back if our product ever fails you and we'll mail you a new....
Check Stock

3/8” Doweling Jig Kit w/Drill Bit & Stop Collar – Wood Dowel Jig Accessories – Dual Edge Stops for Easy Alignment w/Dovetail – Durable Nylon Jig w/Steel Bushings – Dowel Jointer Jig w/Hex Wrench

  • ...e stop out of the way when it’s not needed..
  • Wide Applications: The 2 extremely accurate guided holes for the dowel centers which makes this jig an essential part of every carpenter’s joinery toolbox. This pocket hole jointer drill bit is used for mortising, constructing wooden frames, & more..
  • Pack Includes: Our Rockler Doweling woodworking jig includes (1) Rockler Centering Doweling Jig (choose from several sizes), (1) Matching Drill Bit, (1) Matching Stop Collar, and (1) Hex Key. Each jig hole kit includes a drill bit, stop collar, and hex wrenches..
Check Stock

Leigh AC D24 Router Jig Accessory Kit – Leigh Dovetail Jig Kit Includes VRS & Supports 12 Piece Bit Set - Dust-Free Dovetail Router Jigs – Dovetail Router Bit Set Features ½” & 8mm Shank Bits

  • Router Jig Accessory Kit: The D4 accessory leigh dovetail router jig kit includes the (VRS) vacuum, router support and 12 piece bit set. Leighs....
  • Bit Set: The router table dovetail jig contains 12 different bits for all your daily needs. Easy to perforate in wood. Each drill bit has a variety of....
  • Great for Woodworking: The leigh jig dovetail works well for woodworkers and will last for years. Our dovetail guide kit features degree dovetail, CL....
  • What’s Included? These router jigs accessory kit includes (1) 1/4" x 8 degree dovetail, (1) 5/16" x 8 degree dovetail, (1) 3/8", 7/16" x 8 degree....
  • About Us: The history of Rockler Woodworking and Hardware goes back to 1954 when Norton Rockler started the Minnesota Woodworkers Supply Company in....
Check Stock

Coping Foot Foot Tool for Jigsaw Coping Saw Accessory Compatible with Most jigsaws High Efficiency Woodworking Tools for Jig saw

  • 【A Useful Jigsaw Tool for Woodworking】Cope crown up to 135°.
  • 【Improve Working Efficiency】This Coping Tool turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.....
  • 【Fits Most Jigsaw】This Coping Foot fits most jig saws except Porter-Cable, and the Bosch 1590 and 1591. Also not not work on Festool Carvex. A....
  • 【Strong Quality】The Coping Foot is made of 14 ga. plated steel, which is strong enough to stand the wear and tear during daily woodworking. We....
  • 【Simple installation】Most Coping Foot installations are simply a matter of backing out the screw that retains the factory base and running it back....
Check Stock

INCRA Build-It T-Slot Panel Connector 18-inch

  • The Incra Build-It Modular Jig &Fixture System is a highly versatile collection of jig and fixture "building blocks".
  • Simply connect the parts with a screwdriver and the included fasteners to produce in minutes what used to take hours or even days.
  • From tenoning jigs and crosscut sleds for your table saw to coping sleds for your router table.
  • You can build the perfect jig in minutes with INCRA’s new Build-It System.
  • Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless.
Check Stock

Rockler Drill Jig for Straight Holes – Self-Centering Shelf Jig Kit - Easy to Use Hardware Jig for Woodworking – Easy to Setup Pro Shelf Drilling Jig - Adjustable Shelf Drilling Jig for Multiple Rows

  • Rockler’s Shelf Pin Drilling Jig: Eliminate the possibility of misaligned shelves and cut your setup time in half with the easy-to-use portable....
  • Drilling Template: The 24-inch long twin template tracks of this jig shelf are joined by rigid rails that lock in place for error-free drilling. Our....
  • Error-Free Rows: For error-free rows just lay the drill jig for straight holes on your stock, tighten the two horizontal tracking knobs and start....
  • Easy To Install: This jig drilling is easy to set up and easy to adjust for multiple rows. Mount acrylic templates to pre-assembled extension tracks....
  • What’s Included: Our drill guide jig includes two 5mm and two 1/4" indexing pins that eliminate the need for clamps and allow you to extend long....
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Rockler Router Bit Set Up Jigs for 45 Degree Lock Miter Bits – Jig Works for 3/4” Stock on One Side & 5/8” on Other – High-Quality HDPE Miter Router Bit - Lock Miter Router Bit Measure 2' x 3-7/8' x 3/4'

  • Set Up for 45° Miter Lock Router Bit: The Rockler router bit set up jig helps to set your miter lock bit to the precise height every time for accurate lock miter joints!.
  • Designed To Work With: This router jig works for 3/4" stock on one side and 5/8" stock on the other..
  • High-Quality Material: Our lock miter router bit jig is made of durable HDPE and this lock miter bit measures 2" x 3-7/8" x 3/4"..
  • Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precisely Machined Setup aid and no test cuts required. This woodworking jig helps to adjust a bit. Make life easier!!.
  • Keep Hands Clear Of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and bottom of router collet. Keep your hands clear of bit..
Check Stock

General Tools Crown King Molding Cutting Jig #881 with Protractor

  • 4 EASY STEPS: Perfectly mitered corner joints in four easy steps..
  • ELIMINATE TRIAL AND ERROR: Makes accurately cutting crown molding a snap, eliminating trial and error and saving time and money..
  • PROFESSIONAL GRADE JOINTS: Cut perfectly mitered interior and exterior corner joints..
  • MULTIPLE ANGLES: 45° spring angle crown molding jig with adapter for 52° and 38° angles..
  • ELIMINATES: Difficult angle calculations, coping of joints or compound-angle cutting..
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock

JET J-41002, 2\ x 42\ Belt and 8\ Disc Sander, 1Ph 115V (577004)

  • DELUXE MITER GAUGE: Turns and locks for common angles, 45 degrees both left and right.
  • HEAVY-DUTY: Has a steel base, rubber feet, and cast iron construction.
  • REMOVABLE PLATEN: Allows for sanding, grinding or finishing of outside curves or odd shaped work pieces on the belt.
  • THREE-IN-ONE: Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing.
  • EASY ADJUSTMENTS: Allows an operator to get into small openings, plus handle odd shapes and angles.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...n the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order..
Check Stock