Categories

Best Rockler Table Saw Sled

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Rockler Safety Power Tool Switch - Heavy-duty 15 Amp Power Switch - Stop Paddle to Quickly Shut off Power - Safety Switch for Router Tables or Workbench - Router Table Accessories

  • Rockler Router Table Switch: Just bump the "Stop Paddle" on/off switch, which is easy to find when you're in a tight spot, to quickly shut off power.....
  • “Stop Paddle” Table Saw Switch: This Rockler power tool switch mounts to Rockler steel shop stands or any other surface with screws. No more....
  • Hands-Free: This power tool safety switch helps you keep your hands on your work piece and not removing to hit a power off button. This stop button....
  • Easy To Locate: Locate our router switch near your hip or knee and you'll never have to take your hands off the work piece. The Rockler router....
  • Easy To Install: Several minutes tops that's all it takes. The start and stop router power switch is installed with the help of screws and can be....
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

Rockler Material Mate Panel Cart and Shop Stand – Mobile Base Stand Contains Smooth Rolling 4” Casters – Mobile Workbench for Tools - Rigid Steel Frame Construction – Woodworking Tools and Accessories

  • Rockler’s Material Mate Panel Cart & Saw Stand: The Rockler material mate-panel cart & table saw stand lets you easily roll 4' x 8' sheets of plywood or drywall from your truck or lumber rack to your table saw. You can add a top and use this woodworking table as a mobile shop stand, work table, or outfeed table..
  • Two Positions: The vertical position of this heavy duty cart with wheels allows passage through a service door as narrow as 30'', and provides a more compact footprint when not in use. Add a solid top (not included) as a work table, for use as a work table when not needed as a panel cart.
  • 4 Rubber Wheels For Smooth Running: Our shop stand has four rubber wheels with 4” casters that roll smooth over any surface. This panel cart can run smoothly on all kinds of surfaces like: tile, asphalt, carpet, concrete, etc..
  • Rigid Steel Frame (150lbs Capacity): This heavy-duty, mobile table cart has a rigid steel frame construction, which is sturdy and durable. The universal mobile cart has a top frame length of 36'' & a top frame width (adjustable from 22'' to 30-1/4'....
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...t is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands an....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...t is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands an....
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").

  • ...osscut sled kits come in Red-3/4"x3/8"x36" 2pcs. white-3/4"x3/8"x19"+1feet T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
  • High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
  • Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
  • Outstanding Impact Strength: Even at low temperatures, jigs, fixtures or miter slots....
Check Stock