Categories

Best Rod Holder Tie downs

Wonder Hanger Max Kit - 1 Belt and 1 Tie Hanger

  • TIE HANGER HOLDS 48 TIES: Our specialized tie hanger holds up to 48 neckties. You may also use it as a belt hanger, lightweight purse holder, or for organizing bow ties, keeping all of your accessories tidy. Great for both men and women!.
  • IDEAL ORGANIZATION: Organize your ties by style or color using the different sides of the tie organizer hanger. You can also use it to organize other lightweight accessories..
  • BELT HANGER HOLDS 20 BELTS: Our belt hanger holds up to 20 belts, keeping your accessories neat and tidy..
  • SMART AND EFFICIENT: Easily slide belts in individual slots while keeping them all together on one hanger..
  • 360° ROTATION: Our hanger organizer swivels so you can easily view ties. It effortlessly switches from the front to the back side for easy access without ever removing it from the closet rod..
  • DROP-DOWN BELT AND TIE HOLDER: Easily drop the hanger to a vertical position to maximize your closet space..
  • IDEAL ORGANIZATION FOR BELTS AND TIES: Organize your belts by style or color, using the different sides of the hanger..
Check Stock

Innovative Tip Down (for 2019 (3 Pack, Orange)

  • ... tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
  • THE BASE FETURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in creates a harne....
Check Stock

Innovative Tip Down (Orange - Your Next All-in-One Ice Fishing Set Up (2-Pack)

  • ... tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
  • THE BASE FEATURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in creates a harn....
Check Stock

2PCS Stainless Steel Outrigger Fishing Rod Holder for Marine Boat Yacht

  • Made of 316 Stainless Steel, mirror polished, which must be perfect for your boat. PVC liner protects your fishing rod.
  • 24" nylon rod safety strap & 316 Stainless quick release reel clip.
  • Straps are used to strap the rod holders down and can also be used as safety straps to secure your rod so it down bounce out or get pulled out of the rod holder.
  • Perfect for the fisherman not quite ready for regular outriggers. Heavy duty, easy to stow.
  • Rod holder tube has a 20° up angle from the water. 15.5" tall & 1-1/2" OD gunnel mount tube & 2" Rod holder In.Diameter.
Check Stock

E&K 6'x30' Waterproof Replacement Pergola Cover Sun Shade Sail for Deck Patio Privacy Sun Shade Screen Panel with Grommets Rods Light Grey

  • Outdoor sun shade sail finished with rods and grommets. Used as sun shade screen, shade panel for your outdoor pergola, deck, window, sliding door to create a roomy and cool shade place to enjoy during hot days..
  • Made from 260gsm polyester. Blocks up to 95% UV rays. Waterproof fabric.
  • Weighted rods(included) help to hold down the shade cloth in high winds. Dimensions: 8ft. x 12ft. 8ft sides with rod pockets, 12ft sides with grommets. Every 2ft apart along the edges..
  • Each end of the weighted rod has a finial for tie downs. You are able to keep the rods in place if using tie downs..
  • 2 edges are finished with rod pockets. We provide weighted rods for you to hold down the shade cloth. Just screw the rod sections together and insert the assembled rod into the rod pocket. Super easy installation..
Check Stock

Patio Outdoor Shade Universal Replacement Pergola Canopy Shade Cover 8’X16’ Brown with Grommets 2 Sides Weighted Rods Included Shade Screen Panel for Balcony Deck Porch

  • Made from 165gsm polyethylene. Blocks up to 95% UV rays. Please note: fabric is woven knitted and it is not waterproof. Pergola shade canopy only. Pergola frame not included..
  • Weighted rods(included) help to hold down the canopy in high winds. Dimensions: 8ft. x 16ft. 8ft sides with rod pockets, 16ft sides with grommets. Every 2ft apart along the edges..
  • Each end of the weighted rod has a finial for tie downs. You are able to keep the rods in place if using tie downs..
  • Permeable and breathable fabric- allow rain and air to pass through, rather than gathering a puddle on the top or catching the wind..
  • 2 edges are finished with rod pockets. We provide weighted rods for you to hold down the canopy. Just screw the rod sections together and insert the assembled rod into the rod pocket. Super easy installation..
Check Stock

uxcell 5 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 5 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M3 3.0xL15mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 15mm/0.59 inch, Fit Rod Thread: M3.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

uxcell 10 PCS M2 2.0xL19mm Lever Steering Linkage Tie Rod End Ball Head End for RC Helicopter

  • FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2.
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 10 Pcs x Ball Head Holder Tie Rod End(with Screws and Nut).
Check Stock

SAMSFX Inelastic Fishing Rod Tamer Strap Holder Deck Mount Connector Gunwale Mount Pole Strap TPU Rod Hold Down Strap 12" or 18"

  • PACKAGE: You will get 2 pcs fishing rod tie downs straps (Non-Stretch) for boats, all the same sizes.
  • NON-STRETCH TPU STRAP: The cord was made of solid rubber material and unable to stretch, remains unaffected by sunlight and most chemicals. Better than bungee cords on the market.
  • EASY TO CUT & RESIZED: Strap length: 18 In, holds up to 5 -8 fishing pole. Each end that can be removed so you can easily pull the cord out, trim it to the length you want. The strap cannot be stretched.
  • DECK & GUNWALE MOUNT: 3pcs stainless steel screws included. Deck mount connector for holding fishing rod, Non-corrosive molded ends & hooks, will not snap easily.
  • MULTI PURPOSE: In addition to being used in pairs to secure fishing rod, you can also use the rod straps to keep your fishing poles in the vertical rod holder.
Check Stock

Oceansouth Bimini Extension Airflow Boat Shades Extends up to Length 66 x Width 72

  • Ø 1 1/4 Telescopic Aluminum poles with tapered collar ends, fit securely into rod holder mounts..
  • Heavy-Duty Nylon Tie down Straps with Adjustment Buckles..
  • Webbing reinforced surround edged and attachment loops..
  • Height can be adjusted for comfortable seating or standing..
Check Stock

Onesnt E-Track 4 PCS J Hooks Fitting Enclosed Trailer Cargo Management, Tie Down E-Track Systems in Trucks, Trailers, Vans, with E-Track Spring Fitting Attachments

  • 1.DURABLE ETRACK J HOOKS - TRUCK & TRAILER HANGER TIE-DOWN ACCESSORIES WITH SPRING FITTINGS.
  • each hook has a safe assembly strength of 1,200 pounds..
  • 2.THESE HOOKS ARE ONLY FOR E track rails and singles (NOT INCLUDED, available separately) and are also compatible with the E track enclosed trailer accessories cargo tie down system.
  • 3.These Etrack tie-down hooks have easy THREE SECOND installation - just press the levers on the E track fittings and insert into standard 2.5" x 1" slots on any vertical or horizontal E TRACK trailer tie-down rails or singles..
  • 4.IMAGES includes a detailed mechanical sketch. First, J-hook E-track tie downs have a 4.5" high front and back rods with 4.5 inches wide inner clearance to hang all trailer accessories.
  • hooks may be gold or black. Second,J-hook E-track tie downs have a 4" high back rod and a 1.75" front rod with a 2 inch wide inner clearance to hang all trailer accessories.
  • hooks may be gold or black, contact us to confirm if you are particular..
Check Stock

uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Black for RC Crawler Boat

  • FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.
Check Stock