SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071
- ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
- ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
- ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
- ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
- ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check StockSMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072
- Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
- Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
- Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
- Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
- Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check StockUTV Windshield Fast Strap set set of four
- Universal Fit—Works With Virtually Any Roll Cage Up To A 2” Diameter ❗.
- Sold In A Set Of 4 And Made With High-Grade Materials ✔️.
Check Stockwet sounds Stealth 10 Ultra HD Black + UTV Mounting Kit, Slider Bracket & Round 1.75" Tube clamp
- 300 Watts Of Music For Your Side-By-Side.
- Built In Bluetooth Receiver - Keep your phone safe in the glove box and still control the music from the sound bar!.
- Comes with The Wet Sounds Slider bracket & The 1.75" Tube Clamp - This clamp fits most side-by-sides made today - please check your roll cage diameter to confirm!.
- STEALTH ULTRA SERIES Sound Bars represent the world’s first universal high performance sound system for Side by Sides.
Check StockSMALLRIG Monitor Cage for Atomos Ninja V,Built-in NATO Rail and HDMI Cable Clamp Monitor Cage 2209
- ???? Multiple Threaded Holes: SMALLRIG Ninja V Cage for Atomos mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and a locating mount point for ARRI on the base.
- ???? Built-in NATO Rails: NATO rails are also provided along on both top and bottom to allow use with a range of SMALLRIG mounts such as SMALLRIG Ball Head Magic Arm 2071 or the 2072 for quick release.
- ???? HDMI Cable Clamp: Includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SMALLRIG HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port.
- ???? Drive Locks: For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor.
- ???? Attachment Points: SMALLRIG ninja v cage features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.
Check StockSMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299
- 【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
- 【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
- 【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
- 【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....
Check StockMAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2
- ...omes with rubber pad at the bottom to protect the camera from scratching..
- 【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
- 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
- 【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
- 【T5 SSD Holder & Cable Clamp】The T5 holder is fixed to the cage by cold shoe, securing the T5 SSD and protecting the USB-C cable. The cable clamp attaches to the side of the cage with one 1/4”-20 screw, securing both the HDMI and USB-C cable by pushin....
Check StockSMALLRIG Cage Kit and Sunhood for Atomos Shogun 7 CMA2409
- 【Multiple Threaded Holes】The cage mounts to the monitor by two 1/4’’-20 screws on the top and bottom. Across the cage features multiple 1/4’’-20, 3/8’’-16 holes, and ARRI-standard locating holes allowing mount of accessories, such as SmallRig V-mount Battery Plate 1846 and SmallRig Mounting Bracket for Teradek 2107..
- 【Built-in NATO Rails】NATO rails are also provided along both top and bottom to allow use with a range of SmallRig mounts such as SmallRig Ball Head Magic Arm 2071 or the 2072 for quick release..
- 【Come with HDMI Cables】The cage includes a cable clamp that works with a range of HDMI cables. It is attached on the left to protect the HDMI cables and ports..
- 【Features Drive Lock】The cage also features a drive lock that prevents the SSD on the back from accidentally falling off..
Check StockSMALLRIG HDMI Cable Clamp for Blackmagic Video Assist Monitor Cage, G7/GH4/GH3 Cage, BMMCC Cage - 1693
- SmallRig HDMI Cable Clamp 1693 can provide strain relief for Micro-HDMI cable where frequent tugging could cause damage to the camera. With only one screw to mount to the cage and lock the cable, it can save space for other accessories..
- The HIDM Lock can only be used on SmallRig Cage 1779 (for Panasonic G7), SmallRig Cage 1773 (for Blackmagic Micro Cinema Camera), SmallRig 1585 (for Panasonic GH4/GH3), and SmallRig 1830 (for Blackmagic Video Assist 7" Monitor), SmallRig Cage 1726 ( for Blackmagic Video Assist 5" Monitor)..
- Lock just use a 1/4"-20 screw on the cage, you could attach more accessories. The unsmooth surface (the part clamping the cable) of the cable clamp can increase friction in case of the accidental removal..
- HDMI lock could be adjusted in width for Micro-HDMI cables of different standards..
- Made of 6061 aluminum alloy, surface is very smooth after hard oxidation. Very comfortable to use. Please kindly read which camera cage it will be used on before purchasing..
Check StockNICEYRIG Cable Clamp Lock Applicable for HDMI USB Cable, Compatible with Sony A7RIII A7III A7SII A7RII Camera Cage
- This hdmi cable lock is compatible with a7ii cage/ a7riii cage/ a7sii cage/ a7rii cage..
- Attached to the cage with two 1/4″-20 screws, it prevents the HDMI cable from dropping accidentally..
- This hdmi cable clamp is designed to protect HDMI transmission cable from being collision or broken, help photographer make their HDMI cable more stable to avoid damaging the HDMI port of the camera..
- Package Includes: 1x HDMI cable clamp, 2x 1/4″-20 screw, 1x hex spanner.
Check StockSmallRig Camera Half Cage with Top Handle and HDMI Cable Clamp Kit for Sony a7S III - 3237
- For Sony a7S III: SmallRig Cage Kit 3237 enables you to add accessories and protection as well as a carrying option to your Sony a7S III mirrorless....
- Formfitting Half Cage: This durable aluminum a7SIII cage maintains access to the camera's controls, and rubber padding on the top, sides, and bottom....
- Numerous Mounting Options: The a7s III Cage Features a built-in cold shoe on top, as well as 1/4"-20 threads and a 3/8"-16 anti-twist locating hole....
- HDMI Cable Clamp: The cable clamp is designed to prevent the HDMI cable from pulling or accidentally disconnecting. It mounts onto the side of the....
- Top Handle for ARRI-Style Mount: The top handle uses a locking 3/8"-16 thumbscrew with locating pins to attach securely to your camera cage. In....
Check StockSMALLRIG Camera Cage Kit Master Kit for Sony Alpha 7S III / A7S III / A7S3 with HDMI Cable Clamp NATO Rail NATO Top Handle - 3009
- 【MASTER KIT FOR SONY A7S】SmallRig Camera Cage Kit 3009 is especially designed for Sony Alpha 7S III A7S III A7S3. The kit includes an aluminum....
- 【FORMFITTING FULL CAGE】Made of premium aluminium alloy, the included cage is a solid piece of metal that is highly resistant to oxidation and....
- 【HDMI CABLE CLAMP】The HDMI clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins, which prevents the camera's HDMI....
- 【NATO RAIL & NATO TOP HANDLE】The NATO rail attaches to the top of the cage using two 1/4"-20 screws, and the top handle quickly mounts on the....
- 【TOP RECOMMENDATION】When working with the camera field monitors, you could fix it to the top of cage kit 3009 with SMALLRIG Adjustable Monitor....
Check StockSmallRig Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2926
- Compatibility: This formfitting camera cage is made for Nikon Z5/Z6/Z7/Z6II/Z7II. And compatible with the HDMI & USB clamp of ID 2927 to protect the HDMI & USB cable head..
- Key Functions: To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching..
- Multiple Mounting Interfaces: With multiple 1/4”-20 thread holes and 3/8”-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc..
- Stable And Anti-twist: The cage will hold the camera tightly through a 1/4”-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking..
- Lens Bayonet Protect: Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..
Check Stock