Best Rolled Exhaust Tips

MBRP Exhaust T5173BLK Black Series Exhaust Tip 2.5 in. Inlet 10 in. Length Stainless Steel Black Coated 4 in. Tip w/Logo Plate Black Series Exhaust Tip

• 【Dimension】2.5 inch inside diameter Inlet, 3.5 inch X2 outside diameter outlet, 10 inch Overall Length,High quality, durable chrome stainless steel exhaust tips, polishing for Pair(A LEFT AND A RIGHT).
• 【Design】Double Rolled, Angle, Welding Installation – Rolled Edge..
• 【Material】Pack of 2 dual exhaust tip. Laser engraving JINSANITY PERFORMANCE on both sides. Durable chrome stainless steel exhaust tip, protect your original pipe from the sun and rain, avoid rusting and deformation..
• 【Installation】 Weld on and Professional installation is highly recommended..
• 【1 Year Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product..

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

• Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
• Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
• Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
• Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
• Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

• Dimension: 1.75-2.25 inch adjustable inlet diameter.
• universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
• Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
• effectively anti-corrosive, avoid rust and deformation for enhanced durability.
• Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
• Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
• Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

• Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
• Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
• Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
• Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
• Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
• Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....

DNA MOTORING CBE-HP92-NRT Cat Back Exhaust System [Compatible with 92-96 Honda Prelude]

• 【FITMENT】Compatible with 92-96 Honda Prelude.
• 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
• 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
• 【Muffler & Diameter】4"(Od) rolled Muffler tip/ 3"(od) inlet/ 14mm thick double walled tips.
• 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Top10 Racing Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Rolled Style

• Exhaust Pipe w/ LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
• Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
• Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
• Style: Bolt On - Carbon Fiber Sleeve with Rolled Edge Design..
• Clamp on design, Easy to install in minutes.

Jinsanity Performance Dual Exhaust Tip 2.5 Inch Inlet 3.5'x2 Outlet 10' Length Stainless Polished.(Double rolled, angle,welding) - 1 pair(Left and Right)

• Design: Weld On – Rolled Edge – Angle Cut..
• Wide Application: Fits 2.25″ Inlet diameter car exhaust tail pipe..
• 2.25″ Inlet 2-1/4 inch exhaust tail pipe rectangle tips for universal use..
• 1 Year Warranty: No instruction is included. Professional installation is highly recommended..

4 inches Round Muffler Rolled Tip Catback Exhaust System Compatible with Silverado Sierra 1500 4.3L 5.3L Extended Crew Cab 14-19, Stainless Steel

• ▶️ This cat-back exhaust is compatible with Chevrolet Silverado 1500 2014-2018, Chevrolet Silverado 1500 LD 2019, GMC Sierra 1500 2014-2018, GMC Sierra 1500 Limited 2019, fits with 4.3L 5.3L extended and crew cab models, does NOT fit 2WD crew cab models with 2pc drive shaft..
• ▶️ Come with [1] high performance racing design dual exit cat-back exhaust, it can maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions..
• ▶️ Made of high quality stainless steel with computerized mandrel-bends for strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion. All those material can guarantee the reliable performance in any circumstance..
• ▶️ Easily for the installation, can make you enjoy the best performance in the fastest time..
• ▶️ Major Piping: 3" OD | Muffler Exhaust Tip: 4" OD | Inlet: 3" OD | Outlet: 2.5" OD | Round Diagonal Cut Rolled Tips.

PAIR OF TWO FLAT BLACK UNIVERSAL DUAL EXHAUST TIPS 3"

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On

• universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
• Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
• plus, a drainage hole helps drain water to prevent rust.
• Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
• meanwhile, polished finish offer your car with a new & sporty appeal.
• Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
• Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

• Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
• ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
• Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
• plus, a drainage hole helps drain water to prevent rust.
• Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
• Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
• Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Upower Universal Diesel Trucks Car Exhaust Tip 4 Inch Inlet 6" Outlet 15" Long Stainless Steel Bolt-On

• 【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut..
• 【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation..
• 【Wide Application】Universal fits 4" Inlet diesel trucks pickup car exhaust system. Note: Please keep the Exhaust tip away from salt,snow solvents and avoid using highly acid chemical cleaners.
• 【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..

Pack of 2 Upower Exhaust Tip 2.25' Inlet 2' x 6' Outlet 10' Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips fits Chevy Camaro Style

• 【Design】Weld On – Rolled Edge – Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip.
• 【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation.
• 【Wide Application】Fits 2.5″ INLET diameter car exhaust tail pipe..
• 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..