Categories

Best Roof Adhesive

LT Sport 38

  • Fitment table is for reference only. Measure before placing order to avoid mistake. Make sure your car sunroof/moon roof has at least 1 inch space on each side for proper fitment. (This Item Total Width 38", It will fit Maximum Moonroof Top Window Width 36").
  • Packing Included: 1pc Acrylic Moon Roof Visor.(3M Brand Doubled-Side Adhesive Tape Included). Item dimensions Outside Width 38"(965mm) x Depth 5.75inch(146mm) x Height 2inch(50mm).
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps: Direct Tape-On Design. (Before install the item, make sure the apply surface 100% clean. Double sided tape cannot be re-apply/reuse once it has been placed onto the vehicle. Position the sunroof visor and align it correctly before removing the red plastic. In case place it wrong position will require to replace a brand new double side tape to re-adhere. Do not wash your vehicle for at least 24 hours to allow the adhesive to stay..
  • Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor. Also, leave at least 1 inch (25.4mm) space for each left and right side Moon/Sun roof tape-on area..
Check Stock

38 980mm Universal Dark Smoke Sunroof Visor Moonroof Wind Deflector Shade Guard

  • Fitment table is for reference only. Measure before placing order to avoid mistake. Make sure your car sunroof/moon roof has at least 1 inch space on each side for proper fitment..
  • Packing Included: 1pc Acrylic Moon Roof Visor.(3M Brand Doubled-Side Adhesive Tape Included). Item dimensions Outside Width 38"(965mm) x Depth 5.75inch(146mm) x Height 2inch(50mm).
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps: Direct Tape-On Design. (Before install the item, make sure the apply surface 100% clean. Double sided tape cannot be re-apply/reuse once it has been placed onto the vehicle. Position the sunroof visor and align it correctly before removing the red plastic. In case place it wrong position will require to replace a brand new double side tape to re-adhere..
  • Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor. Also, leave at least 1 inch (25.4mm) space for each left and right side Moon/Sun roof tape-on area. Do not wash your vehicle for at least 24 hours to allow the adhesive to stay..
Check Stock

LT Sport 2mm Universal Moonroof Visor for 33 Window Top Sunroof Wind Deflector

  • Fitment table is for reference only. Measure before placing order to avoid mistake. Make sure your car sunroof/moon roof has at least 1 inch space on each side for proper fitment..
  • Packing Included: 1pc Acrylic Moon Roof Visor.(3M Brand Doubled-Side Adhesive Tape Included). Item dimensions Outside Width 35"(889mm) x Depth 5.75inch(146mm) x Height 2inch(50mm).
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps: Direct Tape-On Design. (Before install the item, make sure the surface 100% clean. Double sided tape cannot be re-apply/reuse once it has been placed onto the vehicle. Position the sunroof visor and align it correctly before removing the red plastic. In case place it wrong position will require to replace a brand new double side tape to re-adhere. Do not wash your vehicle for at least 24 hours to allow the adhesive to stay..
  • Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor. Also, leave at least 1 inch (25.4mm) space for each left and right side Moon/Sun roof tape-on area..
Check Stock

LT Sport 35 Universal Sunroof Visor Top Window for 33 Moonroof Rain Guard Sun Shield

  • Fitment table is for reference only. MEASURE before placing order to avoid mistake. Make sure your car sunroof/moon roof has at least 1 inch space on each side for proper fitment..
  • Packing Included: 1pc Acrylic Moon Roof Visor.(3M Brand Doubled-Side Adhesive Tape Included). Item dimensions Outside Width 35"(889mm) x Depth 5.75inch(146mm) x Height 2inch(50mm).
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps: Direct Tape-On Design. (Before install the item, make sure the surface 100% clean. Double sided tape cannot be re-apply/reuse once it has been placed onto the vehicle. Position the sunroof visor and align it correctly before removing the red plastic. In case place it wrong position will require to replace a brand new double side tape to re-adhere. (DO NOT WASH VEHICLE FOR AT LEAST 48hrs TO ALLOW THE ADHESIVE TO STAY).
  • Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor. Also, leave at least 1 inch (25.4mm) space for each left and right side Moon/Sun roof tape-on area. MEASURE BEFORE PLACE ORDER..
Check Stock

Healifty 4 Pcs Hard Denture Brush Double Sided Toothbrush Multi- Layered Bristles Fake Teeth Cleaning Brush Denture Care (Green)

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove powder denture adhesive powder. It works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the glue on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn powder adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from inner and outer, upper and lower, gum line, and remove with the bristled head..
Check Stock

Voron Glass Extra Durable Wind Deflector for Sunroof Moonroof 37.8 Car Roof Top Window Visor Deflector Shade Guard with Adhesive Tape,Universal Smoke Black Sun/Rain Guard for Sun/Moon Roof - SR11000

  • Protect yourself from excessive wind, water drops, dust and dirt with this industry-leading sun and moon roof deflector guard. This low profile car roof visor will provide you with unbeatable protection while providing your car some style!.
  • Crafted with heavy duty, smoke black plastic, this car roof wind deflector guard can withstand the fastest winds and harshest weather environments. It will provide you and your car ultimate security for years to come..
  • We at Voron Glass have designed this air deflector to fit most sunroofs and moonroofs. With dimensions of 37.8", this universal sun roof rain/sun guard will provide you plenty of protection space from outside elements while your roof is open or closed..
  • Want to add some style and design to your SUV, truck or car? Easily attach these modern and elegant automotive exterior accessories to your sunroof or moonroof for an awesome addition to your car’s appearance. It also provides aerodynamic capabilities to your automobile!.
  • The included 3M adhesive stick that is included with your purchase makes installing this wind deflector a breeze! Simply peel off the protective paper to expose the adhesive backing and stick it to a clean and dry car surface. It’s that easy!.
Check Stock

Denture Dart V2 Hard Plastic Denture Gel Adhesive Remover - Remove Denture Gel Adhesive from Mouth & Gums, Denture Glue Removal Tool, Oral Hygiene, Scraper w/Textured Grip and Rigid Bristles

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove denture glue. The cleaner works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the adhesive on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from inner and outer, upper and lower, gum line, and remove with the bristled head..
Check Stock

Denture Dart V3 Hard Plastic Denture Brush - Denture Gel Adhesive Remover - Remove Denture Gel Adhesive & Glue from Mouth & Gums, Oral Hygiene Product, Scraper w/Textured Grip and Rigid Bristles

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove denture glue. The cleaner works in those hard to reach areas where adhesive is difficult to remove, like the roof of your mouth. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes, the Denture Dart makes removing stubborn adhesive a breeze! Denture brushes and toothbrushes smear the adhesive on the roof of your mouth and make a mess..
  • UNIQUE TEXTURE: The special textured span....
Check Stock

Denture Dart V4 Hard Plastic Denture Brush - Denture Gel Adhesive Remover - Remove Denture Gel Adhesive from Mouth & Gums, Oral Hygiene Products, Scraper w/Textured Grip and Rigid Bristles

  • HOW TO USE: Step 1. Gently use the fingernail like ridge located around the perimeter on the back to scrap adhesive off your upper palette and upper inner and outer gum line. Step 2. Use the HARD non-flexible bristles to snag and remove the collected adhesive. Clean adhesive off the DART with a stiff toothbrush. Step 3. Use the same procedure for the lower, inner and out bottom gum line. Use the spanning legs or HARD bristles to remove collected adhesive..
  • GLUE REMOVER: Featuring a patent pending bristle design, the Denture Dart is rigid with various textures to collect and remove powder denture adhesive powder. It works in those hard to reach areas where adhesive is difficult to remove. Denture brushes and toothbrushes smear the glue on the roof of your mouth and make a mess. Please Note: The Denture Dart is not intended for use to remove denture glue or adhesive from dentures. It should not replace your actual denture brush..
  • EASY ADHESIVE REMOVAL: Instead of using basic denture brushes for dentures, the Denture Dart makes removing stubborn powder adhesive a breeze! Use the Denture Dart from the back of your mouth to the front, dislodging adhesive from i....
Check Stock

LT Sport 35\ Sun/Moon Roof Top Window Sunroof Moonroof Visor Shade Guard Deflector for Honda

  • Fit: Multiple Vehicles (Refer to fitment table).
  • Packing Included: 1pc Acrylic Roof Visor.
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps. Direct Tape-On Design (3M Brand Doubled-Side Adhesive Tape Included)..
  • Professional Install is always requested: Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor. Also, leave at least 1 inch (25.4mm) space for each left and right side Moon/Sun roof tape-on area..
Check Stock

LT Sport 42 Moon Roof Visor Sunroof Vent Rain Guard Wind Deflector Top Window Sun Shield

  • Fitment table is for reference only. Measure before placing order to avoid mistake. Make sure your car sunroof/moon roof has at least 1 inch space on....
  • Packing Included: 1pc Acrylic Moon Roof Visor.(3M Brand Doubled-Side Adhesive Tape Included). Item dimensions Outside Width 42"(1066mm) x Depth....
  • Enhances the Style and Appearance. Improve Safer Driving &Vehicle Style.
  • Simple Installation Steps: Direct Tape-On Design. (Before install the item, make sure the apply surface 100% clean. Double sided tape cannot be....
  • Caution: According to some countries may have different roof size, please measure your "Moon/Sun Roof" and compare with the dimension of our visor.....
Check Stock

HEATIT Roof De-Icing Cable Clips 50-Pack

  • Included 50 aluminum roof clips for approximately 35 linear feet of roof edge.
  • You can use roofing adhesive or roofing nails to install the clips. The holes in each clip can make the clip more stable on the roof. Please buy the....
  • Commercial grade clips, made of non-corrosive aluminum, secure all major brand heat cables to roofs. Can be used on various roofs such as metal,....
  • Provide constant reliable holding power for heat cable on roofs.
  • Two year limited product quality warranty.If you are not completely satisfied with HEATIT products, please feel free to contact us in any time, we'll....
Check Stock

URO Parts 54129734130 Sunroof Seal, Rear Sunroof Seal

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock