Best Roofing System

PORTER-CABLE 15 Degree Coil Roofing Nailer

Uni-Solar PVL-136 Power Bond PVL 136 Watt 24 Volt 216" x 15.5" inches. Flexible Solar Panel. Easiest to Install Peel & Stick.

• Easy to install adhered directly to metal roofing pans, no racking system is required, laminates and metal roofing can be installed in one step.
• there are no penetrations to the roof deck It has flexible.
• Powerbond, flexible solar panel. Peel & Stick..
• Measures 216-inches in length by 15.5-inches width by 0.2-inches in height.

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
• Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
• 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
• The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

Velux TMR 014 0000 Sun Tunnel, 14' Tubular Skylight Acrylic Dome w/Pitched Flashing & Rigid Tunnel

• Shingle/Shake roof - one piece flashing with pivoting tunnel Rigid tunnel is highly reflective and provides brighter, whiter light output in any application New Flexi Loc™ system: A tunnel connection system that reduces tunnel installation time in half and highly reflective tunnels that deliver the highest quality daylight into the space below Pivoting tunnel system Is perfect for installations that require longer tunnel lengths Is installed on shingle and other low profile roofing materia.

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

• #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
• 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
• Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

• 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
• Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
• Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
• Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
• Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
• Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.