Categories

Best Rotary Table For Milling Machines

Samfox Ball Crank Table Handle - Machine Crank Handle for Bridgeport Milling Mill d26

  • Ball Crank Table Handle is safe and convenient to replace the handle.
  • Milling Machine Ball Handle is made of high hardness material, durable to use..
  • Three ball crank table handle for milling machine using..
  • D26 Ball Crank Table Handle is suitable for most milling machines.
Check Stock

Bushfire Rescue (Extreme Adventures #2 )

  • Solid Cast Iron Construction: Swing: 6-1/2"/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut..
  • Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle..
  • High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It's the dividing plates that set the precise distance between cuttings..
  • Strong Workpiece Support: The coming package also includes a tailstock that will give strong support to the long metal stick you are going to deal with, providing a more stable working condition..
  • Versatile Application: The rotary indexer is used on the tables of milling machines and other machine tools, including drill presses, grinders, and boring machines..
Check Stock

Mophorn BS-0 Dividing Head 5 Inch, Precision Dividing Head Set with 5

  • STRONG IN CONSTRUCTION - Swing: 5.5"/140 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long time use. Its delicate parts together work perfectly, mathematically dividing the materials to be cut..
  • EASE OF ADJUSTMENT - The headstock of the dividing head for milling machine can tilt from 10 below horizontal to 90 vertical so that you can handle the stuff of different sizes by changing its angle..
  • WITH HIGH PRECISION - The universal dividing head comes with a direct indexing plate and an interchangeable one which is on the head, and two replacement interchangeable ones with different numbers of holes on them. It's the dividing plates that set the precise distance between cuttings..
  • STRONG WORKPIECE SUPPORT - The coming package also includes a tailstock which will give strong support to the long metal stick you are gonna deal with, providing a more stable working condition..
  • WIDE APPLICATION - The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines..
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Edge Technology Mini Pro Tram System 1/4 Shank

  • Square the head of a milling machine quickly and easily. (1/4" Shank Size) (3" distance between indicators).
  • To use the Mini Pro Tram simply lower unit to the table and adjust the head until both indicators read the same..
  • Guaranteed to be equal to or better than any other tramming method or spindle squaring device available..
  • Sized perfectly to fit smaller table top milling machines or cnc routers. Can be used with a sine bar or sine plate to adjust the head to precise....
  • PLEASE SEE MANUFACTURER WEBSITE FOR TECHNICAL DRAWING..
Check Stock

LANTRO JS - D26 Ball Crank Table Handle, Milling Machine 3 Ball Crank Handle, Replace Handle for Bridgeport Milling Mill, 16mm Inner Hole Diameter

  • △Parameters: Whole Length: Approx. 197mm / 7.8in.
  • Inner Hole Diameter: Approx. 16mm / 0.6in.
  • △Premuim Quality: The crank handle is made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

3 / 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS

  • 3"/ 80 MM ROTARY MILLING TABLE WITH 80 MM ROUND VICE VISE & FIXING T-NUTS BOLTS -ENGINEERING TOOLS.
  • WORM: GEAR RATIO - 1: 36, WHICH MEANS THAT 1 COMPLETE HANDLE ROTATION TURNS THE TABLE BY 10 DEGREE.
  • ROTARY BASE DIMENSIONS: 4-1/8" x 3-1/4" (4 x T-Slots: 5/16"). HORIZONTAL HEIGHT OF ASSEMBLY IS 75 MM (* REFER PICTURE). CAN BE MOUNTED HORIZONTALLY &....
  • COMES WITH 80 MM CASTE IRON QUALITY ROUND VICE/ VISE WITH FIXING NUTS BOLTS. PRECISELY GROUND. MOVING JAWS HAVE VERTICAL 7 HORIZONTAL VEE GROVE TO....
  • VICE IS DRILLED (M6) IN A MANNER THAT IT WILL FIT BOTH TO A 3 AS WELL AS 4 SLOT TABLE..
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • 【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
  • Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
  • Rotate Speed:0-200 RPM.Max Torque:450in-lb.
  • Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
  • 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....
Check Stock

Ball Crank Handle,16mm Inner Hole Diameter,D26 Milling Machine Ball Table Handle,Replace Handle for Most milling Machines

  • It is safe and convenient to replace the handle.
  • Made of high hardness material, durable to use..
  • Three ball crank table handle for milling machine using..
Check Stock

Mini Milling Machine Work Table Vise Portable Compound Bench X-Y 2 Axis Adjustive Cross Slide Table , for Bench Drill Press 12.2inches-3.54" (310mm 90mm)

  • Mini multifunctional working table is composed of several adjustable dovetail slot aluminum alloy composition..
  • The work table The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines..
  • Distance between grooves : 34mm Hand wheel with adjustable scale:A ring=1.25mm,A scale=0.05mm..
  • Table size: 310 × 90mm.Height : 80mm(including two working clamp),standard size is 15x8x6mm..
  • The miniature precision multifunction Milling Machine Bench drill Fixture worktable X Y-axis adjustment working table,which can be applied to mini drill and drill bracket series or other suitable machines..
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock