Categories

Best Rotor Magnets

Sunnytech Solar Mendocino Motor Magnetic Levitating Toy Small Wind Wheel Educational Teaching Model QZ18

  • HIGH-TECH ORNAMENT THAT COMBINES THE MAGNETIC AND ELECTRIC FIELD ----The Mendocino Motor is a magnetically levitated, solar powered electric motor. The motor consists of a spinning shaft that is held up by repelling magnets, stabilized by resting a point against a wall. It is powered by solar panels mounted on the spinning shaft, which generate currents through coils of insulated wire, and rotation..
  • WELL-MADE----Composed of 4 solar silicon wafer, copper coils, shaft, NdFeB magnet, acrylic stent. Add a small wind wheel with 6 leaves. Stable structure and smooth operation.
  • EASY OPERATION ----No Manual at all. Set the rotor to the board, Levitating success on the model, set the model 45degree direction under the light resource. Give the rotor a gently push, it will run smooth..
  • EDUCATION ----Solar panels are devices that absorb sunlight and convert solar radiation directly or indirectly into electricity through photoelectric or photochemical effects, it's perfect devices for science project..
  • AMAZING CONVERSATION PIECES ON YOUR DESK ----Decorative and impressive, it's proven to be a conversation starter to impress your visitors. It’s a cool piece of art even just stands on your desk..
Check Stock

OMPHOBBY M2 Dual-brushless Motor Direct-Drive 3D Helicopter-RTF(Charm Orange)

  • The brushless motor is manufactured by SUNNYSKY with high precision, the motor shaft and the shaft of the rotor head are integrated. Besides, the spindle can be disassembled by removing the three screws, and the installation does not affect the dynamic balance. The hand wound coils and the high-performance magnets provide continuous power to M2. After consecutive violent flight with ten batteries, the motor temperature does not exceed 50 degrees, and it can safely fly violently..
  • Independent R&D integrated OFS flight control system. Gyro, flight control, ESC, and receiver 4 in 1 controller, combined with low-vibration airframe, which makes M2 with precise lock tail and excellent control feeling. The flight control has three built-in flight modes: attitude stabilization / soft 3D / violent 3D, which is suitable for indoor flexible flight and outdoor violent flight. In addition to its own communication protocol, it is also compatible with the receiver interfaces of S.BUS a.
  • The helicopter adopts the precise high-speed all-metal servo, carbon fiber frame, with precision rotor head and swashplate component, which can be controlled accurately and be very durable..
  • The structural parts are made of aluminum alloy CNC, which is of high precisio....
Check Stock

SURPASS HOBBY 550 Brushed Motor 3-Slot 12T for 1/10 1/12 RC Car Crawler Off-Road Traxxas Climbing Monster

  • High purity copper windings maximizes efficiency.
  • Precision balanced rotor, smoothness for best reliability and maximum RPM.
  • Precision engineered for maximum energy conversion.
  • High strength magnets for unmatched brush-motor performance.
  • Excellent torque and long-run times；Direct-solder wiring tabs for flexible soldering options.
Check Stock

GoolRC Upgrade Waterproof 3650 3900KV Brushless Motor with 60A ESC Combo Set for 1/10 RC Car Truck

  • Precision balanced rotor, smoothness for best reliability and maximum RPM.
  • High strength magnets for unmatched brush-motor performance Excellent torque and long-run times.
  • Direct-solder wiring tabs for flexible soldering options.
  • Dual-ball bearings design.Water-proof and dust-proof for all weather races.
  • Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
Check Stock

Sunnydaze 40 GPH Submersible Electric Pump for Hydroponics, Aquaponics, Small Fountains, and Aquariums, 120 Volts

  • ...ss more than 3 times that of stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor..
  • EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting..
  • SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and remove the impeller/rotor. Our waterproof SJTW Electric Cord has 18 gauge copper wire, molded plug with ground and a heavy duty flexible vinyl jacket which resists oil/grease/moisture/abrasion with very good flexibility at all temperatures..
  • SPECIFICATIONS: Salt or fresh water ready with flow Rates of 211 Gallons Per Hour (GPH) @ 0' Lift.
  • Max Lift - 5' 3". Dimensions are 2.72" x 2.05" x 2.91". 120VAC - 12 WATTS - 60Hz..
Check Stock

FLASH HOBBY D2826 Brushless Motor 2200KV Outrunner Motor for RC Aircraft Plane Multicopter Drone Fixed Wing Helicopter

  • Featuring 12N14P high torque design, strong thrust, more powerful than other ordinary brushless motors, high working efficiency.
  • Precisely balanced rotor is stable with high speed, ensure the motor high-speed running without shake and has the best reliability and the largest RPM.
  • High purity copper windings maximize efficiency, 42SH magnets and NMB bearing, good insulation and heat resistance.
  • Motor KV 2200KV, shaft size 3.17 x 41mm, motor mount 16 x 19mm (M3*4), which is compatible with 7~8 inch propeller.
  • The motor battery is 2~3S lipo, which is widely use in RC aircraft, drone, fixed wing, helicopter, plane, multicopter and so on.
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

FLASH HOBBY D2836 Brushless Motor 1120KV for RC Aircraft Plane and Helicopter Brushless Outrunner Motor (1120kv)

  • 1120KV motor is 14 pole 12 slot high torque motor design, 42SH magnets and purity copper windings maximize efficiency, which is compatible with 7~11 inch propeller.
  • FPV brushless motor provides the most incredible power and thrust in the lightest weight. Give you a more satisfied experience with your model.
  • Precision balanced rotor, smoothness for best reliability and maximum RPM. The brushless motor is durable, stable, and has high torque.
  • Each motor has been dynamically balanced, crush-resistant damping bearing, eliminate vibration effectively.
  • RC electric motor mount is 16*19 mm (M3*4) and the motor size is 28 x 36 mm. Package include 1 x D2836 fixed-wing motor and a set of accessories.
Check Stock

FLASH HOBBY D3530 1400KV Brushless Motor Fixed Wing Outrunner Motor for Mini Multicopters RC Plane Helicopter Multirotor Quadcopter

  • D3530 series motor is upgraded with features fixed wing multirotors absolutely need. The motor is lightweight, low noise and higher thrust.
  • FLASH HOBBY brushless motor can be used for 7 inch prop, which is suitable for Mini Multicopters, RC Plane, Helicopter, Multirotor Quadcopter and fixed wing.
  • By adopting 42SH curved magnets and NMB bearing, the pulling force between the stator and magnet is greatly increased. The max pull can be up to 1180g.
  • Precision engineered for maximum energy conversion. Precision balanced rotor, smoothness for best reliability and maximum RPM.
  • High torque motor size is 35 x 30mm, and the shaft size is 5 x 47.5mm, suggest ESC 30A~70A. High purity copper windings maximizes efficiency.
Check Stock

CASTLE CREATIONS Motor, 4-Pole SENSORED BRUSHLESS 1717-1650kV, Green

  • High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions..
  • Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor resulting in a longer lifetime..
  • Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible..
  • High quality, high-current 6.5mm male Castle Bullet Connectors attached to ultra-high strand count replaceable 10-gauge wire.
  • Ideal for 1/6 scale vehicles up to 20lbs running 6s – 8s LiPo.
  • it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. Examples include Losi LST2-E.
  • Redcat Shredder. Note: "Recommendations based on vehicle weight and motor capabilities. Verify motor fitment, may require optional motor mount.".
Check Stock

Star-Art Front and Back Disc Brake Kit - Aluminum Alloy Calipers, 2 Pcs Stainless Steel 160 mm Rotors & Cable & Brake Lever & 12 Bolts, Freewheel Threaded Hubs Hole Distance of 48mm

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

Eppendorf 5405000441 5425 Centrifuge, Knob Control with Rotor FA-24x2 and Aerosol-Tight QuickLock Lid, 120V

  • Max. Rotor capacity: 10 × 5.0 ml vessels.
  • New: Eppendorf quick-lock technology which allows for fast and ergonomic locking of the rotor lid.
  • New: increased software features (e.G. 10 acceleration and braking ramps, 3 program buttons, short function without continuous pressing of the key).
  • New: increased rotor program (5.0 ml rotor, swing-bucket rotor for pcr strips).
Check Stock

KFE KFE768A-104 Ultra Quiet Advanced Premium Ceramic Brake Pad FRONT Set Compatible With: Volkswagen Jetta, Golf, Beetle

  • OEM Fitment and Warranty – Perfect fitment, no issues, and no hassle Limited Warranty.
  • Low Noise - Dual-Rubber Shims dramatically reduces vibration noise.
  • Less Break-In Time - Thermo Scorched manufacture process help reduce break-in time.
  • Increase Brake Bite, Long Life – Slots, and Chamfered edges features enhances brake bite, extends pad life and reduces noise. *Please check per your vehicle application.
  • not all applications have slotted/chamfered features.
  • Compatible With FRONT Brake Pad For: 06-10 Volkswagen Beetle 1.9L TDI 280mm Front Rotor, 00-05 Volkswagen Beetle 1.9L/2.0L 280mm Front Rotor, 06 Volkswagen Golf 2.0L 280mm Front Rotor, 02-05 Volkswagen Golf 1.9L T/2.0L 280mm Front Rotor, 04 Volkswagen Jetta 280mm Front Rotor, 00-03 Volkswagen Jetta 1.9TDI/2.0L 280mm Front Rotor.
Check Stock