Categories

Best Roughing And Finishing Cutters

SPEED TIGER IAUE Carbide Square End Mill for Aluminum Applications - High Feed U-Type Design - for Roughing and Finishing - 3 Flute - IAUE5/16"3 - Made in Taiwan (1 Piece, 5/16")

  • HIGH PERFORMANCE - Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
  • IDEAL FOR ALUMINUM APPLICATIONS - High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
  • STRONG TOOTH WITH DOUBLE RELIEF ANGLES - Attain excellent production rates thanks to improved tooth hardness.
  • TOOTH DESIGN OPTIMIZED FOR ALLOYS - Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
  • Flutes ground by a world-class ISO-9001 factory.
  • BUY BULK AND SAVE - Search Amazon for B07Q8GCHKC for a 5 pc bulk pack or contact Amazon seller for more info.
Check Stock

Wood Turning Tools Rougher Carbide Tipped Lathe Chisel Tool Bar 19.68 Inches With 14mm Straigt Edge Square Carbide Insert for Wood Hobbyist or DIY or Carpenter

  • ❶【8 Models Carbide Cutters Inserts Satisfy All Your Demands】: Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point. Supplied with Screws..
  • ❷【Sphere Of Application】: Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools..
  • ❸【Durable Tungsten Steel Material】: Made of solid tungsten steel - Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life..
  • ❹【Suitable For All Levels Of Carpentry Workers】: This is a free combination suit that meets the needs of roughing and finishing cutting. Suitable for both professional carpenters and beginners..
  • ❺ All the carbide turning inserts cutting tools are supplied with screws..
Check Stock

8Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with sharp point),Supplied with Screws

  • This Combination Carbide Inserts Set match our 6pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits Aogbra 6pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers.
  • 4 different carbide cutters satisfy all you demand:Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round (Ø12mm*2.5mm) and (Ø8.9mm*1.85mm).
  • Made of solid tungsten steel,providing you a better experience and durable use.
  • This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners.
  • All the carbide inserts are supplied with screws.
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

OSCARBIDE 5/8\Shank 7 Pieces/Set Indexable Lathe Turning Tool Holder,CNC Metal Lathe Tools Heavy-Duty for Turning Grooving Threading Nickel Plated Cut Off Set, Tin Coated Carbide Inserts

  • OSCARBIDE 5/8" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading.
  • Replacement Cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

  • Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
  • Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

  • 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
  • Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Accusize Industrial Tools 1'' x 12'' Oal Right Hand S-Mwln Heavy-Duty Boring Bars with Wnmg43 Insert(Oxide Body), 0028-1970

  • Profiling bar for semi-finishing and finishing operations.
  • Boring from light roughing to finishing in small bores.
  • Using 80 degree carbide WNMG inserts negative 5 degree end and side cutting angle.
Check Stock

SILIVN 5pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 5 pcs Screws

  • ....When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
  • 【 Perfect for Professional Carpenters and Beginners】：This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
  • 【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws )..
Check Stock

FomaSP Carbide Inserts for Aluminum WNGG431 / WNMG080404 for Turning Cutting Tools 10 PCS

  • Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality.
  • Size(I.W): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.16mm, Radius(R): 0.4mm.
  • Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing.
  • Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15..
  • Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting..
Check Stock

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

  • ... Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
  • Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
  • Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
  • Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
  • Attain excellent production rates thanks to the strong tooth with double relief angles..
  • Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock