Categories

Best Round Die Nuts

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

  • 【Round Die】- Thread size: M6 x 1.0mm.
  • Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
  • 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
  • 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
  • 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
Check Stock

Nut Cracker

  • Premium Material. Made of quality enameled die casting aluminum, our nut cracker is tough and durable, which looks like new even using for a long....
  • Ergonomic Design. The serrated and conical design can easily break the hard shell and avoid broken shells flying. With non-slip handle and leveraged....
  • Easy to Crack. With different diameters and two crushing part, our nut cracker can easily crack and break the hard shell of many nuts. The big cone....
  • Two Picks. The picks can get the inside of the pulp from the shell easier and faster. Made of quality stainless steel, the picks are very strong and....
  • A Must Tool to Crack Nuts. Our nut cracker and 2 picks, make cracking nuts easily and make your life more convenient. An ideal gift for friends and....
Check Stock

Nut Cracker and 2 Picks, Walnut Cracker Tool for Pecans Nuts, Non-slip Handle

  • Premium Material. Made of quality enameled die casting aluminum, our nut cracker is tough and durable, which looks like new even using for a long time..
  • Ergonomic Design. The serrated and conical design can easily break the hard shell and avoid broken shells flying. With non-slip handle and leveraged design, it is easy to use and labor-saving..
  • Easy to Crack. With different diameters and two crushing part, our nut cracker can easily crack and break the hard shell of many nuts. The big cone for craking walnuts, Brazil nuts, hazelnuts, macadamias and the like, the small crushing part for craking small nuts, such as pecans, almonds, etc..
  • Two Picks. The picks can get the inside of the pulp from the shell easier and faster. Made of quality stainless steel, the picks are very strong and durable..
  • A Must Tool to Crack Nuts. Our nut cracker and 2 picks, make cracking nuts easily and make your life more convenient. An ideal gift for friends and family who like nuts and cooking..
Check Stock

YiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm

  • 【Dimension】-Diameter: 45mm/1.77 inches.
  • 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
  • Used to make new threads when the threads are seriously damaged.
  • 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
  • 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
  • The die stock can securely hold round dies and is easy to operate.
  • 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock

Anwenk Nutcracker Nut Cracker Pecan Walnut Cracker Plier Opener Tool with Wood Handle

  • Heavy duty spring loaded nutcracker - Easy cracking nuts, pecan,hazelnuts, almonds, walnut, brazil nuts,english nuts etc.Note: Do NOT work for hard....
  • More convenient to use compare with traditional crackers - Save using this cracker without injuring yourself with traditional cracker and makes....
  • High Quality Wood Handles- Can hold on tight for perfect cracking, Instead of whole metal handle that chill you hand, this wood handle cracker is your....
  • Material: Enameled die casting aluminum with high quality wood handles which can hold on tight for perfect cracking..
  • Total Length:(approx.) 6.89". (This product can also work as a bottle opener.)..
Check Stock

MroMax M18x8mm Retaining Slotted Round Nuts,Carbon Steel 4-Slot Spanner Nut for Roller Bearing Pump Valve Black 4Pcs

  • ✅【DIMENSION】- Threaded Size: M18 x 1.5mm.
  • ✅【MATERIAL】- These Round Nuts constructed from carbon steel, oxidized black finished, good rust resistance..
  • ✅【Feature】- Retaining Four-Slot Slotted Round Nuts.Design with thread inside.
  • ✅【APPLICATION】- Widely used for roller bearing, axial shaft, pump valve, etc..
  • ✅【PACKAGE CONTENT】- 4 x Slotted Round Nuts.
Check Stock

MroMax M14x8mm Retaining Slotted Round Nuts,Carbon Steel 4-Slot Spanner Nut for Roller Bearing Pump Valve Black 10Pcs

  • ✅【DIMENSION】- Threaded Size: M14 x 1.5mm.
  • ✅【MATERIAL】- These Round Nuts constructed from carbon steel, oxidized black finished, good rust resistance..
  • ✅【Feature】- Retaining Four-Slot Slotted Round Nuts.Design with thread inside.
  • ✅【APPLICATION】- Widely used for roller bearing, axial shaft, pump valve, etc..
  • ✅【PACKAGE CONTENT】- 10 x Slotted Round Nuts.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Bead Roller Round-Over Dies Commplete Set Cr12

  • 1.Material:Cr12, Rockwell Hardness = 40 HRC.
  • 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
  • 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
  • 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
  • 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.
Check Stock

ele ELEOPTION Electric Cutter for 3.5"x2" Card, Automatic Business Card Cutter Binding Machine-110V

  • The desktop CR80 all metal manual PVC card die cutter, cutting size is 2-1/8"x3-3/8" (86×54mm) Standard CR80 (ID-1) with rounded corners. Cutter life-span is more than 100,000 times and cutting thickness is less than 0.03inch(0.8mm). It is a great tool for both professional and occasional users..
  • Long arm handle allow powerful cutting with ease. All heavy-duty metal base, steel blade with excellent edge, long arm of force power-saving Handle..
  • Blade gap is 0.0003-0.0006inch (0.008-0.015mm), round four corners of the card at one time. Easy and accurate positioning and cut neatly..
  • The business card cutter is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other die cutters..
  • With this all metal Card Round Corner machine, you can cut the business cards, credit cards, membership cards, driver's license cards, PVC ID cards and wallet size photos..
Check Stock

Proline MS235BK Round Base Mic Stand 2 Pack Black

  • MS235BK Round Base Mic Stand 2 Pack Black.
  • The MS235 Round Base Microphone Stand features die-cast metal clutches and a heavy-duty die-cast base that keeps the stand where you set it.
  • ProLine microphone stands safely and securely maintain the position you set for your microphones to capture the perfect sound -- in the studio or during live performance.
  • This item features two MS235 stands in black.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ...tuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are made of *** bea....
Check Stock