Categories

Best Round Shank Bits

Clay Spade, 4-1/2inx17in

  • Round Spline Shank (3/4" Hex - 21/32" Round).
  • For Makita HR4041C, or hammers that accept spline shank bits.
Check Stock

Core Drill Adapter 5/8 Threaded Arbor Diamond Hole Saw 5/8 inch - 11 to 1/2 Shank Sanding Attachment Arbor Shaft Adaptor Heavy Duty

  • HEAVY DUTY Core Drill Adapter for 5/8-11 thread to straight 1/2 inch shank..
  • Core Bit Adapter converts 5/8" - 11 Thread to 1/2 inch Straight Shank.
  • Heavy Duty - Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond cup grinding wheel, grinding stone for drill and Back Holders are 5/8 inch - 11 threaded adapter for core bits.
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects to 5/8" 11 Female Threaded Tools, Core Bits, Hole Saws - Makes them a 1/2 inch Shank as a drill shank adapter.
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now you can use sanding, cutting and polisher tools with standard chuck shank with our adapter for core bits.
Check Stock

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Set With Stand, Black Oxide, Round Shank with Flats, 118 Degree Split Point, 33-Piece

  • Set of 33 reduced shank drill bits includes inch sizes 1/2″ through 1″ in 1/64″ increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 118-degree split point penetrates material without a pilot hole.
  • Round shank with flats has three flat sides for better tool grip than a standard round shank.
Check Stock

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Set With Stand, Black Oxide, Round Shank with Flats, 118 Degree Split Point, 16-Piece

  • Set of 16 reduced shank drill bits includes inch sizes 17/32″ through 1″ in 1/32″ increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 118-degree split point penetrates material without a pilot hole.
  • Round shank with flats has three flat sides for better tool grip than a standard round shank.
Check Stock

HIGHFIRE 10 Pieces Hex Shank Drill Bit Set for Impact Driver, HSS Twist Titanium Drill Bits for Metal, Hex Drive Quick Change Drill Bits Set

  • Sizes and Package - Drill bit sizes include: 1/16"*2, 3/32", 1/8"*2, 5/32", 3/16"*2, 1/4",3 /8". 10 PCS drill bit set in a double blister pack with easy opening design..
  • Sharp Cutting Edge - HIGHFIRE hex shank drill bit set has accurate tip geometry which ensures cutting edge sharp and strong. 135 degrees split point tip provides a no-walking drilling start on working surface..
  • Hex Shank Bits- Hex shank drill bits fit in quick-change impact drivers. Hex shank eliminates shank spinning in chuck when using pressure..
  • Solid Connection and Tapered Web - The strong connection of drill bits and shank transits high torque from drills to the tip of the drill bit without breakage. It also decreases radial runout to make the hole rounder. HIGHFIRE hex shank drill bits with tapered web design increases strength and reduces breakage..
  • Twist Flute and Titanium Coating - With optimized flute form, HIGHFIRE drill bit decreases friction and heat easily to ensure fast drilling and a long working life. 35-degree twist flute helps to remove chips quickly. TiN coating extends drill bits life 3 times longer..
Check Stock

Rockwell RW9275 3/8-inch keyless drill chuck for ¼” Hex Drives

  • This light-duty keyless chuck attaches to ¼” hex drives.
  • Allows screwdrivers with ¼” Hex quick-change chucks to use round-shank drill bits.
  • Traditional 3-jaw design with 3/8 maximum shank capacity.
  • Not suitable for impact drivers or applications involving high torque load.
Check Stock

10 Pcs Masonry Drill Bit Set with Strength Carbide Tips Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 Inch.

  • 10 PCS DRILL BITS: measured 1x1/8”, 1x5/32”, 1x3/16”,4x1/4”,1x5/16”,1x3/8”,1x1/2”, the long drilling bits with hex shank can be firmly and stably installed on the electric drill, they’re suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY: made of premium metal alloy and coated with zinc, glass drill set is rust-proof and corrosion-resistant, and the strength carbide tip of masonry drill bits for concrete is wear-resistant and durable..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • MULTIPLE FUNCTION: drill bit set with hex shank is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this hex shank glass drill kit, please feel free to contact us..
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

Stalwart - RBS024 Router Bit Set- 24 Piece Kit with ¼” Shank and Wood Storage Case By (Woodworking Tools for Home Improvement and DIY) Wood

  • ... high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamfer bit, 1/4 Roman Ogee bit, 1/4 slot cutter bit, 1/2 rabeting bit, wood case.
  • Router bit bits set tongue and groove wood doors flooring shaker door routers panel shank joint 1 2 storage kit holder for cabinet sets inch case box plywood tool tools accessories DIY home improvement.
Check Stock

6 Color Drill Extension Bit Holder 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Change Keychain Portable 2022 Upgraded

  • [Save Much Time] -- Great tool to keep track of different drill bits. Hang right on the tool bag. Its all together that it will much easier to do....
  • [1/4 Inch Hex Shank Screwdriver Bits Holder] -- This only works for drill bits with a 1/4 inch hex shank. Bits are also easy to remove and place back....
  • [Aluminum Quick Connect Easy to Use] -- Hex shank drill bits extension bars are very accessible, it can clip it to about anywhere! you can connect to....
  • [Black Metal Hanging Buckle] -- The key-chain adopts a sleek, thick design, sturdy and endurance, the powerful ball lock buckle can carry tools up to....
  • [Specification] -- Material: Aluminum alloy. Color: Black, Red, Gold, Green, Blue, Silver. Package includes: 6 x Hex Shank Screwdriver Bits Holder, 1....
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

ATE PROFESSIONAL SOLID COBALT HEX SHANK QUICK CHANGE DRILL BIT SET 32073 13pc

  • HSS Titanium Coating - Jefe Hex Titanium (TIN) coated Drill Bit can offer 3 times longer life than drill bits without coating..
  • Hex Shank - 1/4 inch Hex shank can be fit in quick-change chuck easily. And it can transit high torque from power tools to the working part of drill bit. Hex shank also eliminates the frustration of shank spinning in chuck. There is an ENHANCED TAPERED WEB in the drill bit that greatly increases the drill bit's strength and reduces premature breakage..
  • Accuracy - 135° split point geometry ensures accurate start and reduces walking on the working surface. Solid bonding technology eliminates radial runout and improves concentricity. High torque, Impact-rated..
  • Multi-Function - Jefe Hex drill bits are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Ideal for use in steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • Package & Size - 13 Pieces drill bits in a double blister pack with easy opening design. 135° Split- point, hex shank drill bits..
Check Stock

Dremel 106 Rotary Tool Accessory Engraving Bit- Perfect for Wood Plastic Linoleum and Soft Metals

  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity. With these two rotary tool accessory bits, you can shape,....
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying,....
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code).
  • WORKING DIAMETER: 1/16" (1.6 mm), SHANK: 1/8" (3.2 mm), MATERIAL: High Speed Steel.
  • The ball shape of the Engraving bit can be used to make concave cuts or hollows out material. The tip makes round bottom slots and grooves and can be....
Check Stock