Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

KREG Precision Router Table System, Kreg# PRS1045

  • 24″ x 32″ router table top includes a router insert plate with three molded Level-Loc reducing rings.
  • 36″ T-square style router table fence features a micro-adjust wheel for precise setups.
  • Outfeed anchor has been redesigned for more usable table space and easier removal.
  • Multi-purpose steel stand is adjustable from 31″ to 39″ in height.
  • Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included..
Check Stock

2351208mm Router Table Plate Craftsman Router Table Insert Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches

  • Easy installation -- A convenient center hole bushing that aligns the router so that it can centered on the drill hole.Drill and install router easily....
  • Material -- A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Router plate....
  • Wide Use -- Multi-function insert plate,suitable for making its own boring and milling table,suitable for high-precision woodworking.It is easy to....
  • Safety -- Inverting your router in a router table allows for safer and more versatile operations..
  • Size -- 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in. This router table insert plate can be used in....
Check Stock

Aluminum Alloy Router Table Insert Plate with Plastic Router Insertion and Install Screws for Woodworking Bench, 300mm x 235mm x 9.5mm

  • High QualityIt is made of aluminum alloy panel, plastic router insert ,durable and can use for a long time.router aluminum adapter plate.
  • Center Hole BushingConvenient center hole bushing for aligning the router to the center of the drill hole. Size: 11.81 x 9.25 x 0.37 inch (appr.). router plate.
  • Easy to AdjustThreaded wrench inserts in each corner help you level and easily adjust the router insert with your table.router plate insert.
  • More Versatile OperationsInverting your router in a router table allows for safer and more versatile operations.router table insert plate.
  • Wide range of usesMulti-function insert plate, suitable for making its own bo and milling table, suitable for high- woodworking. It is easy to operate, save effort and expand the use of the trimming machine at the same time..
Check Stock

DCT Universal Router Table Saw Insert Base Plate Kit 3-7/8 2-5/8 1-1/4 Inches – Cutter & Porter-Cable Template Guide

  • BUILD A TABLE-MOUNTED ROUTER: The DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable....
  • FITS MOST CUTTERS: 3/8-inch thick (1cm) phenolic router plate supports any router with removable baseplate.
  • 3 snap out bit ring openings 3-7/8 inches....
  • EASY TO INSTALL: 9-inch x 12-inch (22.9cm x 30.5cm) plate with pre-drilled table mounting holes.
  • Includes magnets and adjusting screws for securing....
  • BUILT TO LAST: Constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on (not....
  • CONTENTS: Package includes everything you need to mount your router to a table.
  • (1) router plate, (1) guide pin, (4) magnetic holders, (1) Allen....
Check Stock

Kreg PRS2100 Bench Top Router Table with Essential Accessories

  • INCLUDES: (1) Trim Router Table, (1) Transparent Bit Guard, (1) 1/4" Thick Acrylic Base, (1) Removable Fence, (2) T-Knobs, (1) Dust Port.
  • FUNCTION/EASY TO USE: For use with a trim router as a stationary router table for cutting, leveling, jointing, planing routing, and shaping small to mid-sized stock in your home or workshop.
  • Sets up quickly and the router can easily be detached from the table without tools.
  • COMPATIBILITY: The included router plate is designed with multiple predrilled hole patterns that work seamlessly with most trim routers. Fits DeWalt, Makita, Bosch, Ryobi and Porter Cable.
  • SMALL & PORTABLE: Sized for practical functionality, this compact router table can be easily set up on a workbench, table, shelf or any unoccupied work area of your shop – essentially anywhere you see fit.
  • FEATURES: High visibility bit guard to monitor your work, T-knobs that allow you make quick and precise fence adjustments, and an acrylic insert plate that possesses pre-drilled holes compatible with most trim routers on the market.
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

XtremepowerUS Deluxe Bench Top Aluminum Electric Router Table Wood Working On/Off Swtich Craft DIY Benchtop (34\ x 13\) -Black

  • 【Extra Large Extension Table to the Main Table】Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface, helping you complete routing projects better..
  • 【Retractable Guard and Suits Most Router Bits】There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works..
  • 【Multifunctional Fence and Exact Miter Gauge】The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles..
  • 【Selected Material and Rugged Durable Frame】Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability..
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Rockler Pro Router Lift 8-1/4 x 11-3/4 Plate – Kit Includes Aluminum Router Plate Insert Ring Set of Hex Keys on Key Chain - Easy to Install Router Lift Systems - Woodworking Router Table

  • Woodworking Router Lift: Two patent-pending features raise the Rockler router table insert plate with lift into a class of its own: ultra-fast....
  • Easy Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments. Our router table....
  • No Tools To Search For: Push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the router lift table in just....
  • Use The Adjustment Gear: Once the bit is installed, quickly lower it, and click in the insert ring, and use the fine adjustment gear of our lift pro....
  • What’s Included? This Router Lift Kit includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Insert ring (1-1/2''....
Check Stock