Categories

Best Router Coping Sled

Woodpeckers Iron-Grip Coping Sled For Router Table, Precision Woodworking Tools

  • UPGRADED COPING SLED – The Iton-Grip Coping Sled improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp..
  • CRYSTAL CLEAR FENCE – It is 3/8″ thick and 15-1/2″ long, making it ideal to work with any router table fence, whether it’s a Woodpeckers fence, another brand or one you’ve built yourself…it handles them all..
  • NEWLY DESIGNED BACK FENCE – It has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You’ll get three MDF backer boards with your Iron-Grip. When they’re gone you can make your own from scraps or we offer them in convenient 3-packs..
  • MADE IN USA – Like all Woodpecker products, the Iron-Grip Coping Sled is precisely machined and carefully inspected in our Strongsville, Ohio, manufacturing facility..
Check Stock

Rockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs

  • Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
  • Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
  • Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
  • Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
  • What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Rockler 422866 Router Table Box Joint Jig

  • Fence constructed from MDF with low-friction melamine coating for easy sliding.
  • Precision-machined solid brass indexing keys ensure uniform finger spacing and airtight fit.
  • Cuts 6mm (1/4 Inch), 10 mm (3/8 Inch) and 13 mm (1/2 Inch) box joints on a router table.
  • Smooth-sliding sled features long skis that keep it square to the bit.
  • Ideal for creating coping joints for small and medium boxes and frames.
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • ...m and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to allow the sled to slide as desired..
  • The Miter T-Bar can also be mounted upside down by cutting a dado slot into your sled platform that is the same depth as the T on the Miter T-Bar. The Miter T-Bar will then act much more like a standard solid miter bar. Using this type of flush mount may work better in certain situations when compared to the traditional method..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here i....
Check Stock

Router Sled,3 Axis Adjustable,Slab Flattening Mill,Slab Jig-Restricted Position,Router Sled for Woodworking

  • Easy to assemble and adjust. Without a planer and expensive CNC machine,you can easy to flatten wood slab.
  • Router sled can lift (adjustable distance: 5.5inches).Cut multiple groups of wooden blocks to support the L-shaped plate according to the height difference between the slab and router bit,to ensure accurate and stable positioning.The position of the router can be fixed, and linear groove and straight edge can be processed.
  • Brushes are attached beside the wheel to clean up sawdust and dust, prevent wheel blockage and keep the sled running smoothly.
  • Material:The guide rail is made of aluminum alloy,never warp or twist after frequent use.
  • Come with router base plate matched to the router (Installation screws and router not included).Suitable for router with base diameter of less than or equal 9.8inches.If the product lost accessories during shipping, please contact us, we will solve the problem for you.
Check Stock

Woodhaven 3000 27 Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from....
  • 27" wide maximum capacity, 36" Ultra Track rails & 16" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between....
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has....
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

VEVOR Router Sled, 60 inches / 152.4cm Width, Slab Guide Jig for Woodworking with Locking Function, Portable and Easy to Adjust, Trimming Planing Machine for Wood Flattening, Home DIY

  • Compatible with Most Routers: The Slab Jigs are adjustable to fit most fixed-based routers, so you can rapidly level out large wood slabs and easily plane slabs up to 60 inches wide. You can regulate the nut block and the long hole to match various models of woodworking trimming machines..
  • Built to Last: Our router planer rails are made of high-quality machined aluminum, meaning they are not easy to bend or warp, even after lots of heavy use. The slab jig from VEVOR is built tough, and will last for years to come..
  • Upgrade Design: This router slide jig adds a flip board fixing device to make the XY axis work in both directions. Our slab flattening jig also has a 4.3'' x 11.8'' widened base and locking function, providing stable and convenient operation..
  • Simple to Assemble: Includes all the parts you need to put together your new router planning sled in a matter of minutes. Then, you'll be ready to work on river tables and plane wood slabs. 3" tall ultra track aluminum rails support the router and won't deflect as you move the router back and forth over the stock..
Check Stock

Woodhaven 3004 51\ Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from a surface and other jobs impossible for a planer. Router & Bit NOT included..
  • 51" wide maximum capacity, 60" Ultra Track rails & 32" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between the Ultra Track rails for front-to-back movement. You supply two wood rails, 12" to 16" longer than the work. No limit to the length of the work. Double Tracks glide on top of the wood rails and guide the router/Ultra Tracks from side-to-side..
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has an overall length of at least 2-1/2" and a maximum diameter of 2-1/2". Our optional 13600 upshear router bit leaves a great surface finish, has a 1-1/2" cutting diameter, a 5/8" cutting length, a 2-1/2" overall length and a 1/2" shank. Router not included..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock