Categories

Best Router Fence Systems

Flattening Workbenches and Wide Boards with a Router

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Milwaukee Router Adapter for Festool & Makita Guide Rail

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

KREG Precision Router Table System, Kreg# PRS1045

  • 24″ x 32″ router table top includes a router insert plate with three molded Level-Loc reducing rings.
  • 36″ T-square style router table fence features a micro-adjust wheel for precise setups.
  • Outfeed anchor has been redesigned for more usable table space and easier removal.
  • Multi-purpose steel stand is adjustable from 31″ to 39″ in height.
  • Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included..
Check Stock

Bosch RA1171/RA1181 Feather Board # 2610927685

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

SKIL RT1323-01 Router Table and 10Amp Fixed Base Router Kit

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

Bosch Cabinet Style Router Table RA1171 , Blue

  • Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease.
  • The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing.
  • Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy.
  • For added versatility, it’s pre drilled to fit a variety of routers.
  • Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback.
  • They’re fully adjustable to fit a variety of work pieces.
  • Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge.
  • Cleanup: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris.
  • The dust collections ports fit standard 2 1/2 inch vacuum hoses.
  • Convenience: Featuring a dual outlet switch with 6 feet power cord.
  • Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims.
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

Leegol Electric Benchtop Router Table Wood Working Craftsman Tool Router Table A

  • Extra Large Extension Table: Besides the main table, this router table features extension tables at both ends. Each extension table comes with an....
  • Retractable Guard: There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is....
  • Multifunctional Fence and Exact Miter Gauge: The fence is able to provide work piece support around the bit and with the combination of jointing fence....
  • Material and Frame: Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged....
  • Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality gift.If you get a poor one,contact with us,we will supply....
Check Stock

POWERTEC 71536 Deluxe Router Table Fence System 3-3/8” Tall 24\ Long

  • Rockler’s Trim Routing Table: The Rockler professional router tables can quickly attach to the edge of a bench, a table, and a piece of plywood or any flat surface. Get more out of your compact router with a rugged, adjustable trim router table that goes anywhere!.
  • Compatibility: Our Router table Rockler is perfect for small applications such as routing round-overs, chamfers, and small dadoes in your shop or at the job site. The wood router tool table is perfect for providing better control of hand held routers..
  • Fits Most Popular Trim Routers: This router tables woodworking is compatible with Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers – or drill the base to fit your specific router.
  • Easy To Use: Our table mount router sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router tabletop with the included 1/4" thick acrylic base to do freehand work like a standard router..
  • What’s Included? This portable router table includes a high-visibility bit guard, ¼” thick x 5-3/4" diameter acrylic base, fence, T-Knobs let you make quick fence adjustments. This is one of the best router table accessories for your shop!.
Check Stock

XtremepowerUS Deluxe Bench Top Aluminum Electric Router Table Wood Working On/Off Swtich Craft DIY Benchtop (34\ x 13\) -Black

  • 【Extra Large Extension Table to the Main Table】Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface, helping you complete routing projects better..
  • 【Retractable Guard and Suits Most Router Bits】There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (155mm) diameter base plate. Router bits with base plates within this size all works..
  • 【Multifunctional Fence and Exact Miter Gauge】The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles..
  • 【Selected Material and Rugged Durable Frame】Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability..
Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

  • The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
  • Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
  • Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
  • WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
  • WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.
Check Stock

Kreg PRS2100 Bench Top Router Table with Essential Accessories

  • INCLUDES: (1) Trim Router Table, (1) Transparent Bit Guard, (1) 1/4" Thick Acrylic Base, (1) Removable Fence, (2) T-Knobs, (1) Dust Port.
  • FUNCTION/EASY TO USE: For use with a trim router as a stationary router table for cutting, leveling, jointing, planing routing, and shaping small to mid-sized stock in your home or workshop.
  • Sets up quickly and the router can easily be detached from the table without tools.
  • COMPATIBILITY: The included router plate is designed with multiple predrilled hole patterns that work seamlessly with most trim routers. Fits DeWalt, Makita, Bosch, Ryobi and Porter Cable.
  • SMALL & PORTABLE: Sized for practical functionality, this compact router table can be easily set up on a workbench, table, shelf or any unoccupied work area of your shop – essentially anywhere you see fit.
  • FEATURES: High visibility bit guard to monitor your work, T-knobs that allow you make quick and precise fence adjustments, and an acrylic insert plate that possesses pre-drilled holes compatible with most trim routers on the market.
Check Stock