Categories

Best Router Table Safety Switch

Fulton 110V Single Phase On/Off Switch with Large Stop Sign Paddle for Easy Visibility and Contact for Quick Power Downs Ideal for Router Tables Table Saws and Other Small Machinery

  • We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don’t even have an external power switch separate from the router itself..
  • With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on..
  • Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18” long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to pl....
Check Stock

POWERTEC 71353 Safety Toggle Switch – Dual Voltage 125/250v Premium Power Tool On Off Switches Series

  • FUNCTION: Provides enhanced workshop and power tool safety and features a paddle with a toggle switch that allows you to quickly shut down the power to your machines to help prevent accidents.
  • VERSATILE: Works effectively as the perfect power tool on off switch replacement that’s compatible with an assortment of table and band saws, router tables, disc sanders, drill press, dust collectors and other equipment.
  • RATINGS: Dual Voltage: 125/250V | Rated Amperage: 20 at 125V, 12 at 250V.
  • EASY TO USE: Made with a straightforward switch housing and design (2 or 4 wire install) for a quick and easy installation without the need for extensive electrical or wiring knowledge – ideal for craftsman and woodworkers of all experience levels.
Check Stock

Excalibur

  • This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications..
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location..
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process.
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it....
Check Stock

2351208mm Router Table Plate Craftsman Router Table Insert Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches

  • Easy installation -- A convenient center hole bushing that aligns the router so that it can centered on the drill hole.Drill and install router easily....
  • Material -- A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Router plate....
  • Wide Use -- Multi-function insert plate,suitable for making its own boring and milling table,suitable for high-precision woodworking.It is easy to....
  • Safety -- Inverting your router in a router table allows for safer and more versatile operations..
  • Size -- 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in. This router table insert plate can be used in....
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

POWERTEC 71054 120V Magnetic Paddle Switch, 1/2 HP

  • INCLUDES: (1) Power Tool Paddle Switch (includes wiring diagram).
  • FUNCTION: This safety paddle switch provides you with a magnetic emergency stop feature - preventing your tools from powering up after an unexpected outages, blown breakers and other power interruptions.
  • EASY TO USE: Made with a simple and straight forward design featuring a large green recessed ON button safeguarding against accidental starts and a large red OFF paddle switch for a quick shut down.
  • COMPATIBLE: For basic electrical boxes and an ideal fit & safeguard for table saws, router tables, drill presses and other electrical workshop equipment.
  • RATED CURRENT: 1/2 HP, 16 Amps, 120 Volts – Approved by UL, TUV, CSA, CE, ETL standards.
Check Stock

POWERTEC 71007 110 V to 220V Paddle Switch for Power Tools

  • INCLUDES: (1) Power Tool Paddle Switch (GANG BOX NOT INCLUDED).
  • FUNCTION: Performs as an emergency power off safety switch box designed to safeguard your metal and woodworking machines.
  • FEATURES: Large color coded emergency STOP paddle for visibility, labeled and easy-to-install wiring, PLUS a convenient design that fits deep gang boxes or standard boxes with an extension ring (6-32 hardware not included).
  • VERSATILE: Works with a wide assortment of popular name brand table saws, router tables, bandsaws and other power tools.
  • RATED: Single phase, Dual voltage 110/220 volt smart switch, 2 HP/35 amps at 120 volts.
  • 3 HP/20 amps at 230 volts | Approved according to UL508 E195428.
Check Stock

SAWSTOP 10-Inch Contractor Saw, 1.75-HP, 30-Inch Standard Fence Assembly (CNS175-SFA30)

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 30-INCH STANDARD FENCE ASSEMBLY: This aluminum fence assembly is engineered for the ideal balance between lightweight utility and accurate lockdown..
Check Stock

Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with Benchtop Router Table and Deluxe Router Edge Guide

  • Bundle includes Bosch 1617EVSPK Router, RA1181 Benchtop Router Table, and RA1054 Deluxe Router Edge Guide.
  • Electronic variable speed plunge and fixed base router kit.
  • soft start, micro-fine depth adjustments.
  • Benchtop table includes 2 adjustable featherboards, dust collection port, dual outlet switch and 6-foot power cord.
  • Guides cut along the workpiece or up to 8" in from edge..
Check Stock

Bosch Professional adapters for the FSN OFA guide rail (for use during guided routing with Bosch FSN guide rails)

  • This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications..
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location..
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process.
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it....
Check Stock

MLCS 9080 Billy Pedal Foot Switch, Deadman Style

  • Hands-free router control means both hands on your work for safety and control.
  • No need to free a hand to hunt for your router switch.
Check Stock

JET XACTA-Lift with Deluxe Fence (708124)

  • PRECISION ADJUSTMENT HANDLE: Provides up to 2-1/2" of bit depth adjustment.
  • easily removed for a flush routing surface.
  • 11-3/4" X 14-3/4" X 1/4" HEAVY-DUTY ANODIZED ALUMINUM PLATE: Prevents sagging, and lasts longer than plastic router inserts..
  • TWO 3/4" SOLID STEEL SHAFTS: Add rigidity to router bit cutting at desired depth.
  • all moving parts ride on bronze bearing surfaces..
  • ADJUSTABLE SAFETY GUARD: Positions directly above the router bit for safety when in use..
  • 3-5/8" TABLE OPENING: Accommodates larger router bits..
Check Stock

Shop Fox W1837 10\ 2 hp Open-Stand Hybrid Table Saw

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
Check Stock