Categories

Best Router Template

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • ...o two removable plastic inserts, our door hinge installation kit is a fantastic accessory to have on hand for cutting and installing door hinges of round or sqaure corner hinges. This jig allows you to cut professional looking mortises in the doors of hinge from 3” to 5“ length and 1/4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of sturdy plastic material and silicone anti-skid....
Check Stock

Bosch 1617 Router Replacement On Off Switch # 2610016525 (2 PACK)

  • Product cutting half-round angle size R5 R10 R15 R20 R25 R30 R35 R40, commonly used 8 full sizes..
  • Router template, routing rounded corner router bit template, used for woodworking wiring Made of high-quality ABS+CNC, with excellent wear resistance and durability..
  • The product is suitable for the edge of right-angle photo frame, table edge, small stool edge and wood board edge. Select the corner of the template to be copied and place it on the desired corner of the wood..
  • The fillet quick fixture cuts the outer fillet as you want, allowing you to work smoothly and efficiently without worry..
  • The radius router jig craft is simple and easy to use, just you choose the size template corner you want to make and place it on the wood corner that you decide to cut..
Check Stock

PORTER-CABLE Dovetail Jig with Mini Template Kit 4216 Gray

  • Includes Template 4211 For Half-Blind, Rabbeted Half-Blind And Sliding Dovetails.
  • Includes Template 4213 For Through Dovetails And Box Joints.
  • Includes Template 4215 For Miniature Through And Half-Blind Dovetails, And Miniature Box Joints.
  • Template Alignment Lines And Router Bit Depth Gauges Allow For Quick, Easy Set-Up.
  • Router Bit Depth Gauges Allow User To Quickly And Accurately Set....
Check Stock

POWERTEC 71369 Universal Router Base Plate with Centering Pin | 6-1/2' Diameter, 5/16' Thick |Professional Power Router Tool

  • INCLUDES: (1) Universal Router Plate 6-1/2” O.D. with centering pin and assorted screw sizes to accommodate template guide variations.
  • APPLICATION: For Porter Cable style guide bushings for increased precision and serves as a suitable plate or premium upgrade to your existing router assembly.
  • PERFECT FIT: This router plate base features a 1-3/16” center hole, letter-marked pre-drilled holes for easy mounting, and boast a tested format compliant with Porter Cable style template guides along with other standard routers on the market.
  • INCLUSION: Router centering pin is added for accurate alignment from the base to the center of the router collet.
  • VERSATILITY: Accommodates to an assortment of router makes/ brands fits: Porter Cable, Bosch, Craftsman, Dewalt, Hitachi, Makita, Milwaukee, Ryobi, and more.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

Milescraft 1213 HingeMate300 - Complete Jig for Mortising Door & Jamb Hinges And Latch & Strike Plates. Automatic Alignment. For 1-3/8” & 1-3/4” Inch Doors – 2-1/2” to 4.5” Hinges. Router Bit Included , Black

  • Install hinges from 2-1/2in. to 4-1/2in..
  • Adjustable cams automatically align templates for 1-3/8in. or 1-3/4in. doors..
  • Sturdy steel frame can be mounted on both the door and the jamb.
  • Durable tungsten carbide 1/2in. router bit cuts clean, level mortises.
  • Dual-position templates rotate template to achieve 5/8in. or 1/2in. radius mortises.
  • Centered tabs align the jig on pre marked lines, or hold tape measures for manual positioning.
  • Easy to use drop in template design with clearly marked templates.
  • Sturdy steel template frame with door thickness selector knob for 1-3/4 and 1-3/8-Inch doors.
  • Includes durable tungsten carbide tipped router bit with ball bearing eliminating the need for guide bushings on your router.
  • Centered tape measure tabs and easy measure guide ensure correct and precise installation of door hardware.
  • Reusable packaging for template storage when not in use.
Check Stock

SpeTool Spiral Flush Trim Router Bit,1/4 Inch Shank 1-1/8 Inch Cutting Length Extra Long 3 Inch OVL,UP Down Compression Bit for Wood Trimming

  • Sturdy Durable: The flush cut router bit is made of premium carbide according to stringent Industrial grade quality standards provide tough, resists wear and high cutting performance..
  • Sharp Efficient: The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges..
  • Smooth Stable: The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running..
  • Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work..
  • Compatibility: The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4" collet..
Check Stock

Anesty Palm Router Woodworking Compact Router Trimmer with Trimmer & Tilt & Plunge Base and 15pcs 6.35mm Router Bits, Electric Multifunctional Laminate Trimmer - 710W 1/4″ Trim Router Kit

  • 【Compact Router 】: The durable compact router has a powerful motor that can provide high power to meet a variety of applications, and the slim body and soft handle improve comfort and control, enabling quick release of the clamping lever..
  • 【Large Speed Range】: Compact router with 6 adjustable speed options(10,000 to 30,000 RPM) and the power is constant, can be matched with various equipments..
  • 【Complete Accessories】: 1-1/4 HP Palm Router with trimmer base, insert base, tilt base, can be used for all-round precision wiring applications, also with 1/4" 15pcs router bits set, 1/4" & 3/8" collet, straight guide, trimming guide pulley, 8.5mm & 14mm router template guide, dust extracting attachments, spanner, carbon brushes, bolts, etc..
  • 【Precise Control】: Router with the smooth rack, pinion fine depth adjustment system and clear scale can facilitate reading and achieve more precise control and adjustment, can be used for woodworking, handicraft production, etc..
  • 【Easy to Operate】: Compact router base can be quickly and easily removed to install other bases, and the router base accepts industry standard template guides to increase versatility. In addition, the shaft lock can quickly and easily replace the drill bit for easy use..
Check Stock

PORTER-CABLE Door Hinge Template (59370)

  • Quick And Easy Set Up With Lock-In Pins To Ensure Security.
  • Complete With Double Headed Nails For Easy Removal.
  • Included Along With The Template Are A High-Speed Mortise Router Bit With Bearing Brads, Instructions.
  • 8 Hinge Sizes From 2-1/2 Inch To 6 Inch And 5 Door Sizes From 1-3/8 Inch To 2-1/2 Inch.
  • Quick and easy set up with lock-in pins to ensure security.
  • Complete with double headed nails for easy removal.
  • Included along with the template are a high-speed mortiser router bit with bearing brads, instructions.
  • 8 hinge sizes from 2-1/2 inch to 6 inch and 5 door sizes from 1-3/8 inch to 2-1/2 inch.
  • Made from Fiberglass, reinforced plastic with extended platform for better router stability.
Check Stock

Honghzy Templates Corner Radius Jig Router Template Router Parts Accessories,ABS+High Hardness Processing Glue, Portable Table Routing Rounded, R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Pieces)

  • Product cutting half-round angle size R5 R10 R15 R20 R25 R30 R35 R40, commonly used 8 full sizes..
  • Router template, routing rounded corner router bit template, used for woodworking wiring Made of high-quality ABS+CNC, with excellent wear resistance and durability..
  • The product is suitable for the edge of right-angle photo frame, table edge, small stool edge and wood board edge. Select the corner of the template to be copied and place it on the desired corner of the wood..
  • The fillet quick fixture cuts the outer fillet as you want, allowing you to work smoothly and efficiently without worry..
  • The radius router jig craft is simple and easy to use, just you choose the size template corner you want to make and place it on the wood corner that you decide to cut..
Check Stock

PORTER-CABLE Router Template Guide, 9-Piece (42000)

  • Offers a number of template guides to support a wide variety of routing applications.
  • Includes guides 42024, 42033, 42036 and 42045 for general routing applications.
  • Guides 42027 and 42057 complement dovetailing applications.
  • 2 Lock Nuts 42237 are included for securing the guides to the router sub-base.
  • All template guides fit standard 1-3/16-inch diameter center hole router sub-bases.
Check Stock

BAYTORY Professional Pattern Flush Trim Router Bit Set with 1/4 inch Shank, 4Pcs 1/2\ Cutting Diameter Carbide Bits with Top Bearing Prevent Tear-Out, Template Guide Woodworking Milling Cutter Tool

  • Precision Cuts: 4Pcs 1/4 Shank Pattern Flush Trim Router Bits Set, Carbide Template Top Bearing Flush Trim Bits Set, Prevent Tear-Out, Perfectly Suitable for Light Work, 1/2 inch Cutting Diameter, Flush trimming machine drill bit insert cutting length:11mm, 20mm, 25mm, 38mm..
  • High Quality: 1/4 Inch Shank Pattern Flush Trim Router Bit, high-quality alloy steel bodies with C3 micro-grain tungsten carbide blades cutting with precision and ease..
  • For Cutting Various Wood Materials: This flush trim router bit can cut and trim solid wood, density boards, MDF, chipboard, splint, and more. Avoid cutting metal and non-wood material.
  • Versatile Woodworking Tool: This flush trim router bit set is preferred choice of professionals and hobbyists alike. Useful for trimming, grooving, etc. Such as DIY project, lettering, and other template work..
  • Wide in Use: Flush trim router bit 1/4 shank, designed for desktop engraving machines (such as CNC hand-held and table-mounted router). It's cannot be used in electric drill & drill machines..
Check Stock

StewMac Pickup Routing Template for Humbucker, for Body Rout

  • Create perfectly shaped pickup cavities every time.
  • Accurate template placement is easy—crystal clear routing templates allow you to see the guitar body underneath.
  • Simply align the template's laser etched centerlines with the markings on your guitar to get placement right every time.
  • Correct depth measurements are etched right on the template, so you don't need to puzzle over cavity dimensions, we've done that work for you.
  • A thickness of 3/8" means you get good contact betweeb the router bearing and the template without using shims.
Check Stock