Best Rs232 Interface Edge Modem

DTECH DB9 to DB9 RS232 Serial Cable Male to Male Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

(Not for computer monitor VGA-video connection) Simple serial null modem cable (3 wire type and no hardware handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a DE9 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded rs232 cord with AL foil.
DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short serial adapter male to male for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipmentrs.

DTECH DB9 serial cable female to female connects your computer to device with RS-232 compatible (COM port) interface.
RS232c cable 9 pin connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
10 feet DB9 extension cord is long enough for unites side by side.
the wires inside the cable are of 30AWG gauge and easy to solder to.
It is pin-to-pin wired as a DB-9 serial adapter Straight Through (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
10ft DE9 RS232 serial adapter cord for some old RS232C equipment like scanner, Modem, printer, plotter, switches, camera, barcode / embroidery machine, touchscreen, microcontroller, test equipment.

2-port PCI serial card turns a PCI expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98,etc.
PCI 2.1 specification, Standard 16C550 UART signal.
PCI card bracket with two RS232 serial interface uses WCH chip, data communication transfer rate up to 115.2 Kbps.
Full-height bracket design allows PCI to serial card to be installed in virtually any desktop computer case (standard profile computer chassis).
An ideal RS232 serial expansion card for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, radio system, etc. (If need driver installation guide , pls contact us directly via the order page.).

USB to Null Modem (Cross-Wired) RS232 Serial Adapter.ftdi usb serial null moldem DCE adapter cable for upgrading the old version desktop DB9 - DB9 cross wired null modem cable.
usb rs232 to db9 female adapter cable,Add a Null Modem RS232 serial port to your laptop or desktop computer through USB.
This cable is mostly specially used in PC(host) - PC(host) communication, also called null modem cable.
This cable also can be used for PC control the TV, smart TV(as nowadays the TV is a computer).
Length: 6ft Up to 921.6M RS232 transfering speed..

CP2102+ZT232 usb serial null moldem DCE adapter cable for upgrading the old version desktop DB9 - DB9 cross wired null modem cable.
usb rs232 to db9 female adapter cable,CP2102+ZT232 chip..
This cable is mostly specially used in PC(host) - PC(host) communication, also called null modem cable.
Add a Null Modem RS232 serial port to your laptop or desktop computer through USB.This cable also can be used for PC control the TV, smart TV(as nowadays the TV is a computer).
Null modem PINOUT: DB9#2-TX(yellw), 3-RX(orang), 5-GND(blk), 7-CTS(green), 8-RTS(brown).

Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
standard shielded DE9 female RS232 cable with AL foil.
DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.

9 pin male to male adapter connects your computer to device with RS-232 compatible (COM) interface (NOT VGA cable for computer to monitor).
Serial cable male to male DB9 connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
It is pin to pin wired as a DE9 serial Straight Through cord (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G).
6 feet short serial adapter DB-9 cable for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.