DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

  • USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
  • USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
  • rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
  • 1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
  • There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.
Check Stock

Industrial Serial Rs232 Rs485 Rs422 to Fiber Converter Bidirectional High Speed Optic Modem Sc Single Mode 20km 1310nm Serial over Fiber Converter

  • Bi-directional high Speed Serial Data – The Serial Optic Modem have 1ch RS232, 1Ch RS485, 2Ch high Speed RS485, all are Bi-directional. Serial data is fully transparent, baud rate is self-adaptive, no setting is required..
  • High Speed RS485 RS422 – The Serial Fiber Extender's 2Ch RS485H can be grouped into 1Ch High Speed RS422 which can used for DMX512 communication in Stage Lighting Control..
  • 12~48V DC Input – The RS232 /RS485 /RS422 fiber media converter support 12~48V DC Input. Wide range voltage makes it compatible with more DC power supply system..
  • Industrial Grade Quality – Use industrial grade components and aluminum housing, it can work at wide range temperature -40°C to 75°C (-40°F to 167°F). You can use it in outdoor harsh environment..
  • Din-Rail & Wall Mount –The media converter come with 35mm Din-rail Clip and Wall mount accessories..
Check Stock

DTECH RS232 to RS485 Serial Converter Adapter with 4 Position Terminal Block for Industrial Long Haul Communication Data Supports 600W Anti-Surge

  • Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication up to 4000ft (1200 meters).
  • Mini RS 232 to 485 serial adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network.
  • RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically.
  • Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex....
  • A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from....
Check Stock

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

  • Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
  • Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
  • Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
  • 1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
  • Configure Via Web Browser or Virtual Com Software Interface.
  • Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
  • What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..
Check Stock

FTDI USB-RS485-WE-1800-BT Cable, USB to RS485 Serial, 1.8M, Wire END

  • Price For: Each Accessory Type: CABLE, SERIAL CONVERSION For Use With: USB to RS485, SERIAL CONVERSION RoHS Compliant: Yes.
  • The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals..
  • It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols.
  • The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

Mini HD SDI Fiber Extender 1080P HD-SDI Over Fiber Converter Broadcast Level SDI Video Optical Transceiver Single-Mode Single Fiber 20km with RS485 Tally and Loop Output

  • HD-SDI Video: The SDI Fiber converter support HD-SDI with 8-channel audio embedded, resolution up to 1080P&30HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s..
  • Support Rs485&Tally: The HD SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast..
  • Compact Size: The SDI Fiber Extender only 1.7*0.9*2.8 inch in size, it’s so small and can install on cameras..
  • Loop output: The HD-SDI Fiber Optic transceiver support loop output, you can see the image easily in local side..
  • Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource..
Check Stock

USB to TTL Adapter USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

  • Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
  • POW(power), RXD/TXD transceiver communication LED indicator....
  • Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
  • Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
  • You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....
Check Stock

Digi International 70001851 230Kbps Ethernet Device Server

  • Lantronix 2 Port Serial (rs232/ Rs422/ Rs485) To Ip Ethernet Device Server - Us Domestic 110 Vac - Convert From Rs-232.
  • Rs-485 To Ethernet Using Serial Over Ip Technology.
  • One 10/100 Mbps Fast Ethernet Rj-45 Port.
Check Stock

Mini 3G SDI Fiber Extender 1080P 3G-SDI Over Fiber Converter Broadcast Level SDI Video Fiber Optic Converter Include SFP Module Single-Mode Single Fiber 20km with RS485 Tally Loop Output

  • 3G-SDI Video: The SDI Fiber converter support 3G/HD/SD SDI with 8-channel audio embedded, resolution up to 1080P&60HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s.
  • Support Rs485&Tally: The 3G SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast.
  • Small Size: The 3G SDI Fiber Extender only 2.8*1.7*0.9 inch in size, it’s very compact and can install on cameras.
  • Loop output: The 3G SDI Fiber Optic transceiver support loop output, you can see the image easily in local side.
  • Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource.
Check Stock

Seeed Studio LoRa-E5 Development Kit - Based on LoRa-E5 STM32WLE5JC, LoRaWAN Protocol and Worldwide Frequency Supported.

  • ...ard is an easy-to-use compact development toolset for you to unlock the powerful performance of the LoRa-E5 STM32WLE5JC. It consists of a LoRa-E5 Mini Board, an antenna(EU868/US915), a USB type C cable, Sticker and a 1X12pin male pin headers..
  • ✨【Easy Testing and Rapid Prototyping】The sleep current of LoRa-E5 modules on board is as low as 2.1 uA(WOR mode). It is a user-friendly board for easy testing and rapid prototyping..
  • ✨【Full GPIOs Led Out to Rich Interfaces】LoRa-E5 Dev Board also has rich interfaces, including RS-485, Grove, and etc. Developed to unlock the full functionality of the LoRa-E5 module, LoRa-E5 Mini Dev Board has led out full 28 pins of LoRa-E5 and provides with rich interfaces including Grove connectors, RS-485 terminal, male/female pin headers for you to connect sensors and modules with different connectors and data protocols, saving your time on wire soldering..
  • ✨【Long-distance Transmission Range to 10km】LoRa-E5 Mini Dev Board features an ultra-long transmitting range of LoRa-E5 up to 10km in an open area, extremely low chip power consumption, and user-friendly interfaces. Note: Ideal value in open area..
  • ✨【Global LoRaWAN and LoRa Frequency Plan Supported】LoRa-E5 Mini Dev Board embedded with LoRa-E5 STM32WL....
Check Stock

IC/ID Card Machine, Smart Keyboard FRID Access Control Reader(ID)

  • Fast card reading: convenient and fast time-saving card reading time is less than 1s, card reading distance is less than 0.5s, card reading time is less than 0.2s. Card reading distance: 0~80mm.
  • Sensitive reading: The internal radio frequency module and its in-line expansion controller are used to read the card sensitively..
  • Non-slip design: The back of the card reader is a non-slip design with four corners. It is not easy to slide down and can be fixed more stable..
  • Button material: See the use of high-quality crystal materials, special craftsmanship, wear-resistant, easy to clean, comfortable to touch, increase keyboard life..
  • Supporting:With PS/2 keyboard interface, USB interface for keyboard emulation, RS-232 serial output, RS-485 serial output. 2.4GHz/Bluetooth wireless transmission..
Check Stock

DC Variable Power Supply WZ5005 Adjustable Switching Power Supply with 4 Digit LCD Display for Lab Equipment and Electronic Testing

  • ...DC power supply is made of flame retardant material with small size and light weight, possess constant voltage and constant current output, overvoltage and overcurrent protection, overtemperature and undervoltage protection for long time usage..
  • EASY OPERATION-- USB to TTL module (U2T)/RS485 to TTL module (T485) can be selected with remote connection control for necessary test requirements..
  • EQUIPPED WITH LARGE LCD DISPLAY-- Adjustable switching power supply is designed with 1.8-inch high-definition LCD screen with LCD 4-digit display, support PC upper computer, support for Android APP..
  • DATA HOLD FUNCTION FOR EASY DATA STORAGE-- Variable power supply comes with convenient and quick data storage, key lock function to prevent misoperation..
  • AUTOMATICALLY SHUT OFF FOR SAFE TESTING-- The output over?voltage (OVP)/over?current (OCP) data can be set through the buttons on the panel, and the over?temperature protection (OTP)/under?voltage protection (LVP) is built?in. When the output voltage, current and device temperature exceed the protection value, input voltage is less than the prote....
Check Stock