Categories

Best Rubber Camshaft Seals

Brian Tooley Racing BTR Truck Stage 3 Includes Cam, Beehive Springs, Pushrods, Michigan Motorsports Seals Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs, Michigan Motorsports Seals, 7.400" Chromoly Pushrods 4.8 5.3 6.0.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods.
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear..
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance..
Check Stock

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock

Honhill 20pcs Crank Bearing Camshaft Oil Seal Remover and Installer Kit Crank Seal Kit Crankshaft and Camshaft Seal Tool Kit

  • ⭐UNIVERSAL COMPABILITY: Camshaft bearing installation tool fits for most oil seals between 27mm and 58mm (1.06’’-2.28’’) in diameter..
  • ⭐MAIN FUNCTION: Want to remove and install the oil seal quickly? Replacing it with the oil seal installer and remover kit saves your time and money without worrying about scraping the crank surface..
  • ⭐STOP THE DAMAGE OF THE CRANK: The blue camshaft oil seal installer tool adapters are made of aluminum, removing and installing crank and cam seals in a breeze, preventing the damage of the crank..
  • ⭐LITTLE USING TIPS: Please kindly note that the thinness of the arm is to fit the crank seal easily. Professional and gentle installation are recommended. Using it with too much strength is not suggested..
  • ⭐DECENT SERVICE: Your purchase fully protected when ordering it today. If you have any concern, please feel free to contact us..
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

Private Brand Tools PBT70961 Crankshaft and Camshaft Seal Tool Kit

  • Easily remove and install crankshaft and camshaft seals without damage.
  • Compact puller with unique extracting hooks engage seal for quick removal.
  • Interchangeable sleeves and mandrels allow easy installation of new seal.
Check Stock

2 Set VCT Camshaft Timing Control Solenoid Valve Set Fit For Ford 3V 5.4L 4.6L F150 LINCOLN MERCURY 6 PCS 2 Solenoids + 2 Seals + 2 Screws

  • ● The Camshaft Variable Valve Timing Solenoid or VVT Solenoid control the engine's Camshaft shafts on your Ford 5.4L or 4.6L V8 Triton engine. When....
  • ● Replace the following OEM Part number: 3L3Z-6M280-EA.
  • ● Including 6 pieces: 2 Variable Valve Timing Solenoids (Both Left & Right).
  • ● Fit for :2005-2010 Mustang GT w/ 4.6L V8.
  • ● Seals Measure 1-3/4 Inch and Fit Early VCT Systems. Late VCT Systems seal's hole is in the center, Early VCT Systems seal is not in the center,....
Check Stock

Camshaft & Crankshaft Seal Tool Kit (Suits seals from 21.5mm-64mm)

  • Easily remove and install camshaft and crankshaft seals.
  • Compact puller with unique extracting hooks engage seal for quick removal.
  • Interchangeable sleeves and mandrels allow easy installation of new seal.
  • Sleeves and mandrels made from high strength fiberglass reinforced polymer.
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ... Lifters kit for 2005-2006 Chevrolet Trailblazer Ext 5.3L V8, for 2006-2008 Chevrolet Trailblazer 5.3L V8, for 2005-2006 Gmc Envoy Xl 5.3L V8, for 2005 Gmc Envoy Xuv 5.3L V8, for 2005-2009 Gmc Envoy 5.3L V8, for 2007 Gmc Sierra 1500 Classic 5.3L V8.
  • Camshaft kit for 2005-2013 Gmc Sierra 1500 5.3L V8, for 2010-2013 Gmc Sierra 5.3L V8, for 2007-2014 Gmc Yukon Xl 1500 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock