Categories

Best Rubber Cradle

Stock Clearance! CB SKY Foldable Guitar stand/Acoustic or Electric guitar

  • Heavy Duty Metal Tubing with Adjustable Support Rod..
  • High quality rubber cover of the neck and base to protect the guitar.
  • Suitable for electric, acoustic and bass guitars..
  • Collapsible for easy transport and storage.
Check Stock

Rawlings | Jumbo Rubber Bands (Pair) | Baseball/Softball Glove Break-In Aid

  • BREAK-IN ASSISTANT | Designed to help break-in any baseball or softball glove.
  • RECOMMENDED USE | Place a ball inside the pocket of the glove and wrap the bands in an "X" patterns around the outside and let sit (directions included).
  • CRADLE SHAPE | Helps to mold the glove into a desired cradle shape.
Check Stock

Ultimate Vehicle Air Vent GPS Car Mount for Garmin Oregon 200 (SKU 30243)

  • Bespoke cradle fits the Garmin Oregon 200 300 400t 450 450t 550 550t 600 600t 650 650t GPS units. All function points and charging port remain accessible..
  • All function points and charging port remain accessible..
  • The new Ultimate vent mount uses a small metal jaw which, when offered up to the vent slat and tightened provides a discreet, secure mounting base for the cradle..
  • The jaws are rubber lined to protect your slats..
Check Stock

Thule AirScreen XT Wind Fairing , M (38\),Black

  • This Red rubber bike rack hitch and Durable, UV resistant yet soft rubber cradle straps quickly secure your bicycle in place and work with a wide range of tube sizes.These bike car rack accessories make your bike will be held tightly. No need to worry about whether your bike will fall while driving.
  • The tie-downs straps used on various Racks trunk, sedans, hatchbacks, minivans, SUV's, hitch and spare tire bike racks. The saddle is adjustable and its spacing can accommodate bicycles of various frme sizes and designs.
  • Wide Compatible Accessories: This spare hook ladder design fits many carriers with protruding attachment knobs.This bike rack straps replacement is easily and safety on your bike. Attaches to cradles with protruding attachment knobs.
  • This replacement cradles for bike rack are designed to be installed quickly and without tools, side straps for increased lateral stability. 1 1/4 and 2 inch receiver hitches, with no wobble bolt, Tie down cradle system individually secures and protects bikes.
  • Contains 6 bike spare hook and 6 ladder-style straps, Diameter of tube: 1". It will fit tubes of 1 inch diameter.
Check Stock

Xpress 970 Style Bike Rack Straps 2-Pack Replacement for Thule 853-2569

  • Replaces damaged or worn Stay-Put Cradles on Thule bike carriers. The Stay Put Cradle will fit the Thule Fits Thule Roadway (TH912XT, TH914XT),....
  • A variety of replacement cradles and straps that fit Thule hitch and strap racks..
  • Replaces rubber stretchable straps on Thule and other brand cradles with protruding attachment knobs on both sides of the cradle.The holes of these....
  • Contains Twelve (12) ladder-style straps and Six(6) stay put Cradles. Diameter of tube: 1". IT will fit tubes of 1 inch diameter.
  • Works with optional anti-sway cage to help keep bikes from moving front to back during transport.
Check Stock

AR-PRO (6-Pack) Replacement Bike Rack Cradle Straps .49\ Ladder-Style Strap Holes Compatible with 1/2\ Tab 534 Thule Bike Rack Straps Replacement

  • THULE BIKE RACK STRAPS REPLACeMENT - This ladder-style strap is a compatible replacement for Thule 534 rubber bike rack straps. Don't wait for the original bike straps to fail on you. Replace it with high-quality Thule replacement straps..
  • COMPATIBLE TO OTHER BIKE CRADLES - These straps are also compatible with other brands of bike racks that use protruding attachment knobs on both sides of the bike rack cradle. The strap length is 9.24" while the stretchable strap holes have a diameter of .49" and can fit on 1/2" tabs. The length of the straps and its stretchable allows for a secure hold on a wide range of bike racks, carriers, and accessories..
  • HIGH-QUALITY REPLACEMENT BIKE RACK STRAPS - Get maximum use out of this 6-pack replacement rack cradle straps. They are both durable and stretchable at the same time. Made from high-quality rubber, these replacement bike straps won't warp out of shape, tear, crack or dry out after several uses..
  • VALUE FOR MONEY - Pay less for more. Don't let the cost add up by purchasing bike strap replacements that snap and tear after several uses. This 6-pack Thule replacement straps cost considerably less per piece (up to 3% less) in comparison to 4-pack bike strap replacement kits..
  • NOTE: We do not provide assurance tha....
Check Stock

Bikehand Floor to Ceiling Indoor 2 Bike Bicycle Vertical Dual Hanger Parking Rack Storage Pole Stand for Garages or Apartments Gravity Hook for Bicycles – Hanging Road, Mountain or Hybrid Bikes

  • HEAVY DUTY: 2 inch diameter extra heavy duty aluminum alloy tube with Non-Slip Rubber Ends. Could easily handle max bike weight 20kg or 45 lbs per cradle. 2 bikes in total: 90 lbs. The Max height is 330cm or 10.8 feet..
  • EASY TO INSTALL & ADJUST: 90% Assembled And Just Needs To Install The Hook Claw Bracket, Angel And Height Adjustable For Fitting Most Type Of Bike Frames. You Can Watch Our Video Which Clearly Shows How To Install The Stand Rubber Hooks Anti-scratches..
  • CRADLE HOOKS: 2 cradles are included. They are EVA coated ensures on scratches on the frames. Easy to adjust the width, angle and height to fit all the bikes: such as ladies bikes, Y shape frame downhill bikes etc..
  • NON-SLIP RUBBER FOOT: Non-slip rubber foot can be used on most kind of surfaces, like carpet, wood floor and concrete. If needed,The foot has two holes, you can mount it onto the ground with screws ( not included). The wheel is used to adjust the height of the base part, so the rack can be secure against to the ceiling and the floor..
  • BIKEHAND QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We’re So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Suppo....
Check Stock

Stark Professional Series 16 ft Drywall Rolling Lift Panel Hoist Jack Caster Construction Dry Wall Lifting w/Caster Wheel Yellow

  • Allows One Person Working Alone - This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install....
  • Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel....
  • Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4' x 16' in size, with a maximum load of 150....
  • Versatile Function - Features a 16' reach for flat ceilings and over 19' reach on walls/angled ceilings.
  • Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.
Check Stock

Comfort Zone CZHV12B 12-inch High-Velocity 3-Speed Floor Fan with 180-Degree Tilt

  • HIGH-VELOCITY 3-SPEED CONTROL: Choose from 3 speed settings on this high-velocity fan to optimize air circulation and provide powerful airflow in your home or office space..
  • ADJUSTABLE TILT: This 3-speed floor fan features 180-degree vertical tilt that easily adjusts to direct the airflow to suit your environment and comfort level..
  • DURABLE DESIGN: All-metal construction of this high-velocity room fan ensures lasting durability, while rubber feet help to maintain stability for vibration-free performance..
  • QUIET OPERATION: This high-velocity fan is designed to run quietly and efficiently, so it will not disrupt users while they work or rest..
  • CRADLE STYLE: A versatile floor fan for office or home use, the cradle style and neutral black color fit discreetly with most decors while the convenient carry handle allows for easy transport..
Check Stock

Comfort Zone CZHV12B 12-inch High-Velocity 3-Speed Floor Fan with 180-Degree Tilt, Black

  • HIGH-VELOCITY 3-SPEED CONTROL: Choose from 3 speed settings on this high-velocity fan to optimize air circulation and provide powerful airflow in your home or office space..
  • ADJUSTABLE TILT: This 3-speed floor fan features 180-degree vertical tilt that easily adjusts to direct the airflow to suit your environment and comfort level..
  • DURABLE DESIGN: All-metal construction of this high-velocity room fan ensures lasting durability, while rubber feet help to maintain stability for vibration-free performance..
  • QUIET OPERATION: This high-velocity fan is designed to run quietly and efficiently, so it will not disrupt users while they work or rest..
  • CRADLE STYLE: A versatile floor fan for office or home use, the cradle style and neutral black color fit discreetly with most decors while the convenient carry handle allows for easy transport..
Check Stock

Pyle Multi Guitar Stand 7 Holder Foldable Universal Display Rack - Portable Black Guitar Holder With No slip Rubber Padding for Classical Acoustic, Electric, Bass Guitar and Guitar Bag / Case - PGST43

  • Deep cradle design that prevents the guitar from being improperly placed in its hanger. Padded with high density rubber to prevent damage to the guitar's finish.
  • Yoke pivots to cradle the guitar's headstock making it great for guitars which have a headstock with single or uneven heels.
  • Quick and easy installation using only a screwdriver.
  • Wood block is made of real hardwood. Made in the USA.
  • Trusted by over 10 million guitars since 1983.
Check Stock

Dual Car Cigarette Lighter Charger Compact Mount and Holder for The Golf Buddy PT4 Features 12V Adapter and Charging USB Port

  • Ultra compact spring loaded bracket/cradle holder for the Golf Buddy PT4 easily accommodates 128.6 x 69.2 x 15.8 mm..
  • Connect your Golf Buddy PT4 to the mount via the universal USB power dock and charge a second device from the 12V receptacle..
  • Shock-absorbent foam inserts on the bracket and rubber lining on the holder's expandable arms protect your Golf Buddy PT4 and dampen vibration for bumpy rides in any car / truck..
  • Choose vertical or horizontal viewing on your Golf Buddy PT4 with the bracket/cradle holder.
  • Adjustable pivot arm on the cigarette lighter mount allows 360 degree rotation of holder so you can position it exactly where needed..
Check Stock

Caldwell Lead Sled DFT 2 Rifle Shooting Rest with Adjustable Ambidextrous Frame for Recoil Reduction, Sight In, and Stability

  • DIMENSIONS: Weighs approximately 24 pounds and is 30 inches L x 12 inches W.
  • ACCURACY: With windage adjustment, up to 2.5inches of front elevation adjustment, rear elevation adjustment, recoil reducing rear cradle and a baffled weight tray for up to 100lbs of lead shot (not included), this rest is solid during and after every shot.
  • NON-DESTRUCTIVE: This rest features a skeletonized front rest, a rear cradle and no-skid rubber feet all with non-marring material that will securely hold your gun without damaging any point of contact.
  • EASE OF USE: Adjustment knobs are conveniently placed to allow for easy adjustments that do not require removing the gun from the rest.
  • VERSATILITY: With a dual frame design and 18 inches of length adjustment this rest can fit rifles and shotguns of virtually any size.
Check Stock