SPECSTAR 1100 Lbs Engine Support Bar Transverse Hoist for Motor Transmission with 2 Points Lift Holder and Dual Hooks

  • ...changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch.
  • PREMIUM FEATURES - The overall dimension of this solid engine brace is 59.1” (L) x 8.7” (W) x 7.9” (H).
  • It comes with double strong iron chains that ensure the safe landing of the motor, which is handy for doing engine mounting.
  • The non-slip thickened rubber feet on the bottom of the triangular base can effectively reduce noise when moving and prevent scratches on the car.
  • EASY TO OPERATE - First, place black triangle support bases in the appropriate position, then fasten the engine with iron chains, and turn rotating hoists to raise or lower the motor to the proper height based on your needs.
  • Designed with rubber materials on round knobs and hoist handles, which can protect your hands in use.
Check Stock

QWORK 3\ Air Duct Hose, Extendable to 39-3/8\

  • High quality material: made of high quality aluminum and rubber material, high/low temperature resistant..
  • Easy Installation: with mounting clamps, 2 aluminum mounting clamps and 2 rings, easy to install..
  • Adjustable: Inner dia: 3 inch, unstretched length: 12-3/16”, can extend to 39-3/8”, 360 degree fully flexible..
  • Good Performance: Can enhance filter protections, improve throttle response and restore engine performance.
  • Suitable for: Fit for most vehicles with intake, tube and hose size 3 inch (76mm)..
Check Stock

AQUOS EASYMATE Folding Marine Outboard Motor Stand/Outboard Engine Carrier for Small to Medium Boat Engine, Max 20HP / 90 LBs

  • MOTOR CARRIER – No more lugging boat motors! The Guide Gear Motor Carrier helps you expertly maneuver heavy boat motors around the shop, driveway, or garage..
  • DURABLE – Made from 1” tubular steel for robust durability with a tough 1/2" plated steel axle. Easily transport your boat parts with the heavy-duty Motor Carrier..
  • WEIGHT CAPACITY – The Motor Carrier is designed for moving boat engine motors of up to 85 lbs. Features ergonomic, easy-grip handles for simple movement..
  • TOUGH WHEELS – The engine stand includes tough 7" semi-pneumatic rubber wheels which provide stability and support under heavy weight..
  • MOUNTING BOARD – The motor stand features a molded mounting board. 46" tall from top of handle to ground..
Check Stock

XFMT Black 1-1/4\ 32mm Motorcycle Short Angled Highway Engine Guard Foot Pegs For Harley Streamliner Style

  • Folding Highway Pegs with Mounts, 360 degree Adjustable.
  • Fits for Harley-Davidson models with 1 1/4" (32mm) Engine Guard.
  • Length: 4 21/64" (11cm) Width: 2 11/64" (5.5cm) Mounting Diameter: 1 1/4 "(32mm).
  • Package Includes: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + Set of Allen Wrench.
Check Stock

Kemimoto Motorcycle Highway Pegs Foot Peg for Softail Sportster Electra Road Glide Road King Street Glide (Chrome)

  • The problem of broken or loose clamps has been solved. Now the upgraded version is available for you..
  • Adjustable Angles - Mounting clamp is 360 degree adjustable, and firmly grips the engine guard, and the locking design secures the peg at the desired angle. Skid proof engraved durable rubber surface..
  • Vehicle Specific - Fits for Road Glide Electra Glide Road King Street Glide Sportster Softail Dyna with 1 1.25" (32mm) Engine Guard Bar.
  • Relax Your Foot - Add a place to tilt your foot outward, make your foot more comfortable for a long ride..
  • Package Includes: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + Set of Allen Wrench.
Check Stock

Creatyi 6 PCS Rubber Flexible Hasp T-Handle Draw Latches

  • Package included: 6 PCS rubber flexible draw latches with brackets..
  • T-Handle Latch body made of high quality elastomer to reduce vibration ,apply prepressing.
  • Great for hoods,vehicle engine hood,machine hood,oscillatory machine,battery boxes and compartment doors..
  • Latch is designed for either vertical or horizontal mounting..
  • Material: Flexible Rubber, Nylon and Premium high quality SPCC.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • ... 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember Is Not A Universal Fit Unit. | * This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas..
  • Kit Includes: Southwest Speed 1955-1957 Chevy Tri-5 Tubular Auto/Manual Transmission Crossmember (# 400-7084) | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion | * Southwest Speed Polyurethane Transmission Mount (# 400-7031) | * Black Performance Polyurethane | * Will Outlast Traditional Rubber Mounts | * Zinc Finish.
  • Crossmember Specs: | * Center Crossmember Overall Width: 32" | * Crossmember ....
Check Stock

Powerbuilt Engine Leveler with Handle, 1500 Pound. 3/4 Ton Capacity, Four Point Mounting System, Adjust Engine Tilt - 640470

  • Balances or tilts engine/transmission for easier install/removal.
  • Four point mounting system for maximum control.
  • Precision four point mounting system gives you maximum control.
  • Built-in swivel handle lets you adjust the tilt of the engine as you raise or lower it.
  • Worm shaft rotates using built-in swivel handle.
Check Stock

Motorcycle Highway Pegs Foot Peg for Street Glide Road King Electra Glide with 1.25\ Engine Guard 1 1/4 Highway Bar, Black

  • FITMENT - for Road Glide Electra Glide Road King Street Glide Sportster Softail Dyna with 1 1.25" (32mm) Engine Guard Bar.
  • Relax and Comfortable Riding - Add a place to tilt your foot outward, make your foot more comfortable..
  • Adjustable Angles - Both 2 adjustable parts can adjust 360 degrees for any angles you want, and the durable mounting clamp firmly grips the engine guard..
  • Package: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + A Set of Allen Wrench.
  • For any problems with the product, please feel free to email us by Amazon. (PS: Not recommended for installation with rubber shims between the crash bars and clamps.).
Check Stock

[New Generation] Highway Pegs Footpegs Foot Rest Fit for Touring Street Glide Road Glide Road King Electra Glide with 1.25 inch Engine Guard 1 1/4 Highway Bar (Black)

  • [Material]:Made of heavy duty billet aluminum,strong and durable,and prime quality rubber not easy to came off.
  • [New Generation]:①New generation mount clamp ,firm grip the engine guard ②Oversized footpegs,provide more comfortable place for foot ③Short arm designed for many multi-fit applications especially for tall riders.
  • [Multi-Angles Adjustable]:The foot pedal and mount clamp is 360 adjustable,you can adjust comfortable angle and position.
  • [Fitment]:Fit for Harley Touring Road King Street Glide Road Glide Electra Glide with 1 1/4 inch highway bar.
  • Universally fit on 1 1/4" engine guards or tubing.
  • requires 1 1/4" of straight engine guard tube for clamp mounting (Please check your model and engine guard size,if your engine guard diatemeter is not 1 1/4 inch,they will not fit).
  • [Package]:1 pair highway pegs +Mount clamp kit(As the picture show).
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
  • Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..
Check Stock

MX Offroad Floorboard Driver Softail Foot Pegs Footrests for Softail Slim FLSL Low Rider Street Bob Fat Boy FLSB FXBR 2018-2020 Black

  • The problem of broken or loose clamps has been solved. Now the upgraded version is available for you..
  • Adjustable Angles - Mounting clamp is 360 degree adjustable, and firmly grips the engine guard, and the locking design secures the peg at the desired angle. Skid proof engraved durable rubber surface..
  • Vehicle Specific - Fits for Road Glide Electra Glide Road King Street Glide Sportster Softail Dyna with 1 1.25" (32mm) Engine Guard Bar.
  • Relax Your Foot - Add a place to tilt your foot outward, make your foot more comfortable for a long ride..
  • Package Includes: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + Set of Allen Wrench.
Check Stock

Dirty Cillian: Dirty Dusters (The Hudson Dusters Mob Collection Book 1) MAFIA / MOTORCYCLE CLUB ROMANCE - CROSSOVER UNIVERSE BOOK 2

  • Condition: 100% Aftermarket New, High class quality and very durable.
  • The mounting clamp is 360 degree adjustable, it firmly grips the engine guard, and the locking design secures the peg at the desired angle. The highway footpegs add a place to tilt your foot outward, make your foot more comfortable for a long/short ride..
  • Material: High Quality Metal & Rubber ,Color: Chrome + Black.
  • Universal Fits for All Models with 1.25" engine guards. Fit For Harley Touring Road King Street Glide Road Glide Electra Glide Softail Standard Softail Springer Classic Softail Slim Dyna Low Rider Fat Bob Sportster 883 1200 Honda Goldwing GL1500 GL1100 GL1200 GL1800 Yamaha Kawasak Suzuki BSA Norton Triumph Bobber Chopper Cafe racer ATV UTV Scooter.
  • Package Included:One pair Highway Engine Guards Foot pegs.
Check Stock