Categories

Best Rubber Hanger Gaskets Flanges

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Gibson GP129S Stainless Steel Performance Header

  • Direct Fit bolt-on Replacement, No Welding Required, Uses OEM Style Connections.
  • Heavy Duty Laser Cut Port Flanges-No Warping or Leaking Premium Gaskets and Hardware.
  • Will Not Affect the Factory Warranty. Meets EPA and Carb Requirements.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

  • Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

Dokili Exhaust Pipe Manifold Gasket Spring Rebuild Kit Fit for Polaris Ranger 700 800 Sportsman 600 700 2002-2007 Touring X2 2009 2010 2011 2012

  • Fits well, quality compares to OEM Harley flange..
  • Stainless Steel, Chrome Metallic Color exhaust flanges.
  • Specific dimension are all detailed, Includes 2 flanges, 2 exhaust gaskets, 2 retainer clips, and 4 acorn nuts.
  • Handmade Exhausts Flange Kit with Tapered Gaskets and Nuts , quality Harley exhaust flange gasket kit for almost Harley Davidson bikes except V-ROD.
Check Stock

Henny Penny Seat Gasket

  • SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
  • Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
  • Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
  • Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
  • Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Sterling Seal and Supply , Inc. API 601 9000IR12304GR150 Spiral Wound Gasket with 304SS Inner Ring, 12\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock

Sterling Seal & Supply SSS 9000IR1304GR150X6 Spiral Wound Gasket with 304SS Inner Ring, 1\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite (Pack of 6)

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock

Sterling Seal & Supply SSS 9000IR1500304GR150X6 Spiral Wound Gasket with 304SS Inner Ring, 1-1/2\ Pipe Size x 150# Class Flange x 304SS/Flexible Graphite (Pack of 6)

  • Sur-Seal, Inc. Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -320 to 850 Degrees.
Check Stock