Categories

Best Rubber Hose Crimper

20mm Flip Vial Crimper, 100 Pcs Flip Caps and 100 Pcs Rubber Stoppers Are Included (20mm)

  • STANDARD CRIMPER------this crimper is designed for standard 20mm ALUMINUM-PLASTIC flip cap (just as the picture) and vials. Product application is very extensive. When using this crimper to sealing the 20mm vial, the rubber stopper is necessary..
  • VERY STURDY AND LONG SERVICE------This crimper is made of 304 stainless steel which ensures a long service life. There is anti-slip sleeve on the handle, so the crimper is not easy to fall when sweating on your hand..
  • PROTECTION FUNCTION AND BUFFER FUNCTION------Excessive force will not damage the vial mouth and cap. Under the protection function, the sealing effect is still very good..
  • EXQUISITE APPEARANCE----This crimper is polished by hand. Not only looks good, but also feels good to use. It is processed by precision equipment with almost no error..
  • FREE CAPS AND RUBBER STOPPERS------100 high quality caps and rubber stoppers are included. The caps and rubber stoppers are standard 20mm..
Check Stock

Hydraulic Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool (SK8056)

  • This A/C hose crimper set is made of aluminum alloy material to ensure durability. The stamper hardness can reached 53 HRC, which can make the crimping effect better..
  • It has complete dies for the most common sized hoses and fiitings, covering hose sizes #6, #8, #10, #12 and reduced barrier #8, #10 and #12. The dies can be snapped quickly into the press fixture requiring no pins or screws..
  • Applicable for bead locking fitting. The crimping tool has a base that can be mounted to a bench for easy use,or the base can be held by any vise.
  • The A/C hose crimper set is an one-person operation, saving your time and energy. It is light-weight and compact, suitable for narrow space. The pressure of hydraulic repair tool can not exceed 40MPa, it only use for aluminum material..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

  • Includes 2 barbed hose splicers and 4 hose ferrules.
  • Common USA torch inlet and regulator outlet connections.
  • Low pressure, less than 200 psig gas service.
  • Repair your 1/4-Inch hose in the field, (ferrule crimper not included).
Check Stock

Leberna 115 Pcs 304 Stainless Steel Stepless Single Ear 7-29mm Hose Clamps with Pincers Crimper Tool Kit | Securing Pipe Hoses Automotive | Cinch Rings Pinch Clamp, Crimp Clamp Assortment PEX Crimping

  • ...rrosion-Resistant】TUV approved, high precision single ear stepless hose clamps are made of 304 stainless steel. These clamps are anti-rust and corrosion resistant, a good choice for long-term use. Hose clamps are used to seal various types of hoses. Included pincer is used to increase clamp force. The jaws of the crimper are made of chrome vanadium steel, which is durable and will not collapse or deform. It is the perfect design for repairing pipes & plumbing systems..
  • 【Cochlear Design】Cochlear design ensures continuous clamping during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status..
  • 【Polished Smooth Edge】The edge of all clamps are polished smooth, and they will not damage the hose. 360 ° Stepless Design, no inner protrusion/gap and Narrow band design provide a more centralized seal pressure..
  • 【COMPLETE SPECIFICATIONS】This single ear hose clamp set comes with 10 common sizes: 6-7 mm, 7-8.7 mm, 8.8-10.5 mm, 10.3-12.8 mm, 12.8-15.3 mm, 15.3-18.5 mm, 17.8-21.0 mm, 20.3-23.5 mm, 22.4-25.6 mm, 25-28.6 mm. They are widely used in hoses and plastic pipes, especially suitable for plumbing, beverage, automotive, marine, motorcycle, and industrial applications. One Ear Clamp ....
Check Stock

Cable Lug Crimping Tool - Wire Crimper for Battery Terminal Copper Lugs AWG 10/8/6/4/2/0 Heavy Duty Blue

  • 【6 CRIMPING SETTING】- The battery cable crimper has 6 dies for 10/8/6/4/2/0 gauge wire terminals and cables,....
  • 【PRECISE SOLID CRIMPING 】- This wire crimper is made of high quality #45 steel, durable to use. Precise crimping molds and complete locking (self....
  • 【LABOR SAVING, NON-SLIP HANDLE】- The long handle of the wire crimper is 10 inch and wrapped with soft and anti-slip rubber, ergonomic lever....
  • 【HEAVY-DUTY BATTERY CRIMPER】- You can use it to crimp cable of car battery or home electric battery, lugs does not peel off..
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

Twidec/Wire Crimping Pliers 2.8/4.8/6.3 mm Spade 26-16AMG Crimping Tools Manual Crimp Fold Tool for Open Barrel Terminals SN-48B

  • This hand crimper has efficient ratcheting mechanism. Crimping is accurate and never damage the terminal,crimping is in one step..
  • Wire Crimper Design: Made of high-carbon steel which is treated with black oxidation,rust and corrosion resistance and insulated rubber, and ratcheting mechanism design help you take less strength to make a good crimp. Crimping range is AWG26-16, 0.5-1.5mm², suitable for 2.8mm, 4.8mm, 6.3mm spade connectors.
  • This terminal crimper has a star wheel that you can adjust the handle crimp strength by adjusting the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
  • Emergency release device:Make sure that the terminal is crimped into place so that the crimped terminal and wire are securely and securely combined. The crimping operation can be terminated and the terminal can be exited in the event of a misoperation.Pressure adjustment knob:When crimping terminals of different sizes, if the wires cannot be pressed, loosen the screws, adjust the knob, + to increase the pressure, - to reduce the pressure..
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band securely until clamped.
Check Stock

PEROMI 210pcs Single Ear Hose Clamp with Pincers Crimper Tool,12 Size 6-36.1mm 304 Stianless Steel Pex Cinch Clamp Rings Assortment Kit for PEX Tube Fitting connections

  • [Include Size] This single ear hose clamps with pincers crimper tool kit have 12 common sizes: 7mm, 8.7mm, 10.5mm, 12.8mm, 15.3mm, 18.5mm, 21mm, 23.5mm, 25.6mm, 28.6mm, 31.6mm, 36.1mm, all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.hose clamps are used to seal various types of hoses..
  • [360°Stepless Seal] Narrow band design providing a more concentrated sealing pressure.
  • The cochlear design provides a powerful thermal expansion compensation function, which compensates the dimensional change of the pipe due to temperature changes, so that the tube is always in a well sealed and fastened state..
  • [Ear Clamps Pliers] Equipped with 1 ear clamps pliers, non-slip rubber handle, Great length on handles, strong and well built. using the proper matching plier, these clamp can be equipped fast and will hold very well, which saves your time efficiently.
  • Multi size pack is handy to have for your projects & repairs..
  • [Easy to Install] The slide ear clamp ring onto the tube, push the pipe onto th....
Check Stock

Mastercool Blue 71500-A Hydra-Krimp AC Hose Crimper,Black

  • ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
  • IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
  • HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
  • MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
  • EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.
Check Stock

Battery Cable wire Lug Crimping Tool for AWG 8-1/0 terminals with Cable Cutter and 20PCS Tubular Ring Terminal Connectors and 20PCS 3:1 Dual Wall Adhesive Heat Shrink Tubing

  • Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has widely application in automatic electronics work..
  • The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG 8，6，4，2，1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place..
  • Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort when crimping..
  • The crimper set contains 20PCS ring terminal connectors(AWG8-5/16,AWG6-5/16,AWG6-3/8,AWG4-5/16,AWG4-3/8) save your time and money to buy other connetors..
Check Stock

HKS Battery Cable Crimping Tool for AWG 10-1 Copper Ring Terminals, Heavy Duty Crimper for Wire Lugs

  • 【Lightweight】The use of high-strength aluminum alloy handle, significantly reducing the weight of crimper ,operating more labor-saving. (Approx. 2.35 lbs.).
  • 【Rotatable Crimp Jaw】 Secured by spring-loaded locking pins, available in 6 crimp sizes - 10, 8, 6, 4, 2, 1/0 AWG - (6mm²/10mm²/16mm²/25mm²/35mm²/50mm²)..
  • 【Efficient】The non-slip rubber coated handle of this tool makes working more comfortable and effortless. Press the screw, rotate the crimp to the size you need and simply make a good crimp on the cable lug..
  • 【High Reliability】The jaw is made by EDM wire cutting process for more durability and precision.The crimper body is made of high quality steel die-casting. They are subjected to strict quality inspection process before leaving the factory..
  • 【Package Contents】1 x HX-50B Crimper..
Check Stock