Categories

Best Rubber Mallet For Flooring

Lamton Laminate Flooring from BuildDirect | 12mm | AC3 | Brown | 6.6in. x 48in. |Sample

  • high-strength mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 1 3/8 inch in diameter(other brands usually is 1")that can provide more powerful force.The handle is made of fiberglass will not break, fell apart and handle bent.The whole mallet is 11 inch long and weighs 0.89lb.
  • upgraded pull bar is designed with enhanced strength, more longger and thicker than others.Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed.Ours is 3/16 inch thick, 12 inch long is heavy duty.2 soft pads on the back help to prevent scratching your floor during installation.
  • tapping block is made from solid polypropylene material, it is durable for long use, suitable for most types of floors.
  • 40 spacers included to allow you install a large flooring area more convenient and easier.
  • 40 x spacers.It is professional use for laminate or hardwood flooring installation.
Check Stock

EZARC 64-Piece Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Heavy Duty Pull Bar, Tapping Block, Foam Kneepads and 60 Piece Spacers

  • ✅【Enhanced Pull Bar & Tapping Block】Extra thick high strength steel made pull bar designed with 3'' wide front edge and felt pads at back help to prevent damaging and scratching your plank during installation. Premium vinyl rubber made tapping block can support highly intense flooring installation task. Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring..
  • ✅【Excellent Protection】Provide comfortable and waterproof foam kneecap offer true knee support and protection while kneeling on hard and slippery surfaces. Make your work will be easier and more comfortable..
  • ✅【More Wedge Spacers】60 x wedge spacers are included to facilitate flooring installation of large flooring area. The spacers have “serrated” edges that lock them into the correct position once a board is placed against them..
Check Stock

REXBETI 43-Piece Upgraded Laminate Wood Flooring Installation Kit with Solid Tapping Block, Long and Wider Pull Bar, Diameter 1 9/16\ Reinforced Double-Faced Mallet and 40 Spacers

  • High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 40 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent.
  • 12.2 inch long, 4.5mm thick Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed.
  • 40 spacers included. Allow you to install your laminate wood flooring more convenient and easier.
  • Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring.
Check Stock

SHIHAOHZ Rubber Mallet Hammer 12 OZ Black Fiberglass & TPR Rubber Handles

  • 1. Solid rubber head delivers softened positive blows for shaping and blunt strikes.
  • 2. TPR material handle with shock absorption design Ergonomic non slip rubber grip，tail hanging hole storage, convenient for hanging.
  • 3. Multi use rubber mallet for construction,flooring, tent stakes, woodworking, jewelry, laminate, soft blow tasks, auto work, carpentry.
  • 4. No need to worry about this rubber hammer cracking and breaking under pressure.
  • Rubber mallet constructed of durable rubber to withstand extended,repeated use.
Check Stock

VonHaus Laminate Wood Flooring Installation Kit with 30 Spacers, Tapping Block, Pull Bar and Hard Rubber Mallet - Home and Professional Use

  • 40 mm 20oz double-headed rubber mallet is more heavy duty for your flooring installation.
  • Upgraded pull bar is 4mm thick, 12 inch long.The end of pull bar where connected to the wooden floor is widened, will not damage the floor.
  • 40 spacers let you install your laminate wood flooring more convenient and easier.
  • Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring.
Check Stock

Lamton Laminate Flooring from BuildDirect | 12mm | AC3 | Black | 6.5in. x 48in. |Sample

  • High Quality: The hammer head is made of high quality cream rubber, wear-resistant, good elasticity. Will not destroy the surface and effectively protect the object being knocked. The pull bar comes with anti-wear pad which provides strong stability, is convenient and practical..
  • Function: Suitable for 0.27in (7mm) - 0.6in (15mm) laminate/hardwood flooring for both domestic and professional use. This laminate flooring kit could be used to strengthen the floor as well as installing solid wood composite floor..
  • Specificaton: Double Headed Mallet Approx. 26x7.5 cm/ 10.2x2.9 inch. Pull Bar Approx. 27x4.5 cm/ 10.6x1.8 inch. Tapping Block Approx. 16x6 cm/ 6.3x2.4 inch. Spacer Approx. 6x3 cm/ 2.4x1.2 inch(WxL)..
  • Application: Pull Bar-to eliminate gaps on the long side of the planks. Tapping Block-Could be inserted into the tongue of the plank when tapping two planks together. Spacers-Adjust the thickness of the gap. Using the mallet to hammer the tapping block could help eliminate gaps between planks..
  • Package Included: Package Includes 1 x Double Headed Mallet, 1 x Pull Bar, 1 x Rubber Hammer, 30 x Spacers..
Check Stock

Wood Is Good WD202 Mallet, 30-Ounce

  • Double-faced solid rubber head delivers a softened, positive strike.The mallet head is 40 mm in diameter,more heavy to meet your various job.
  • High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration.
  • Reinforced head and fiberglass handle without any issue of head fell apart and handle bent.
  • Extra long handle fits perfect in your hand suitable for leather crafts, Jewelry, flooring installation and home use.
  • High quality rubber hammers can be used for a wide range of use, from door and window repair to floor installation and ladies' handwork.
Check Stock

3PLUS HFSNSP 2-in-1 Pneumatic Flooring Nailer/Stapler

  • 2 in 1 flooring tool uses 15-1/2 gauge staples and 16 gauge L cleats ranging from 1-1/2" to 2".
  • Interchangeable flooring plates for all sizes of floorings.
  • Has pneumatic driving action. Used in hardwood and engineered flooring..
Check Stock

REXBETI 43-Piece Laminate Wood Flooring Installation Kit with 40 Spacers Tapping Block Heavy Duty Pull Bar and Diameter 1 3/8 High-Strength Fiberglass Handle Mallet Non Slip Soft Grip

  • high-strength mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 1 3/8 inch in diameter(other brands usually is 1")that can provide more powerful force.The handle is made of fiberglass will not break, fell apart and handle bent.The whole mallet is 11 inch long and weighs 0.89lb.
  • upgraded pull bar is designed with enhanced strength, more longger and thicker than others.Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed.Ours is 3/16 inch thick, 12 inch long is heavy duty.2 soft pads on the back help to prevent scratching your floor during installation.
  • tapping block is made from solid polypropylene material, it is durable for long use, suitable for most types of floors.
  • 40 spacers included to allow you install a large flooring area more convenient and easier.
  • 40 x spacers.It is professional use for laminate or hardwood flooring installation.
Check Stock

DILAKS Laminate Wood Flooring Installation Kit with 40 Spacers, Solid Tapping Block, Heavy Duty Pull Bar, Reinforced Double-Faced Mallet and 1 Pair Knee Pads

  • High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 40 mm in diameter and this mallet weighs 19.7 ounces.
  • The pull bar is made from premium steel with corrosion resistance. Designed with 10.4 inch long with 2 soft pads on the back help to prevent scratching your floor during installation.
  • Newly upgraded tapping block is made by solid and durable material and have various sizes wedge for use on various thicknesses of floors.Suitable for 0.14in (3.5mm) - 0.6in (15mm) laminate or hardwood flooring.
  • A comfortable pair of knee pads will ease knee pain during floor installation.You can safely kneel on the ground and move to get your work done quickly and efficiently.With adjustable straps are easy to wear and take off, one size fits all.
  • 40 spacers included to allow you install a large flooring area more convenient and easier.
Check Stock

Carpenter Air Tools CFL4518-18 Gauge L Cleat Flooring Nailer with Mallet

  • Compatible with 3/8” to 3/4” Engineered or solid hardwood tongue and groove flooring..
  • 3 Interchangeable non-marring base plates for different thickness flooring..
  • High quality fiberglass rubber mallet will last for years of flooring Installation..
  • Durable heavy duty heat treated aluminum housing to last for years of use..
  • Lightweight design helps to reduce Installer fatigue during prolonged use..
Check Stock

Rubber-Cal Elephant Bark Flooring, Black, 3/8-Inch x 4 x 6-Feet

  • ✅ EVERYTHING YOU NEED ( MALLET UPGRADED AUGUST 2022) - Be prepared for any DIY floor installation tasks with this kit. It comes with a rubber mallet, a 12" pull bar, a solid tapping block, 40 spacers, and a 10" contour gauge..
  • ✅ DUPLICATE ODD ANGLES - Copy odd-shaped angles and edges like a pro. The 10-inch duplicator gauge with lock is perfect for making accurate copies of curved corners, round edges, and tight trim angles..
  • ✅ INSTALL MOST KINDS OF FLOORING - This laminate flooring installation kit is a must-have for DIY or professional use. This set may be used for installing laminate, vinyl, hardwood, or tile floors..
  • ✅ BUILT TO LAST - You can expect all these flooring tools to stay in perfect shape for many years. Each one shows off solid construction, giving you peace of mind that they can withstand heavy duty use..
  • ✅ CUSTOMER SATISFACTION - This floor installation kit is backed by a Limited Lifetime Warranty. If you're not happy with this set, let us know within 1 year of purchase so we can issue a refund..
Check Stock

3PLUS HFSNSP-FM Fiberglass Handled Replacement Flooring Mallet

  • Replacement mallet for flooring nailers and flooring staplers.
  • Fiberglass handle provides lightweight and durability.
  • High quality white rubber cap prevents scratching and marring during installation.
  • Comfort grip handle ensures firm grip and minimizes slippage.
Check Stock