Categories

Best Rubber Mold Products

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

EZETES Silicone Mold Making Kit, Translucent Liquid Silicone Rubber for Jewelry, Casting, Resin, Sculpture Silicone Molds, Soap, Candle Making - 21.16 oz - 1:1 Mixing Ratio Molding Silicone

  • FAST CURING & NO BUBBLES – Depending on the Size of Your Silicone Mold it takes up to 12 Hours to Cure Completely at Room Temperature. All Bubbles will Disappear AUTOMATICALLY within 2 Hours. In case of spill – Clean with Soapy Water..
  • LOVE IT OR LEAVE IT: We Provide Only the HIGHEST QUALITY Products. If You feel unsatisfied with our Silicone Mold Making Kit for ANY reason, We will Happily Refund Every Penny, and keep the Mold Kit as our Gift to You!.
  • MULTIPURPOSE APPLICATION – Our Silicone Mold Kit is IDEALLY SUITED for Making Unique Casting, Resin, Wax, Candle, Soap Molds – Your Imagination is Your Limit! Note: The Mold Making Kit is not intended for Food Purposed Silicon Molds..
  • PREMIUM SILICONE RUBBER MATERIAL – Our Mold Kit Translucent Silicone is COMPLETELY SAFE, NON TOXIC and ODOURLESS! Boost Your Creativity by Adding Mica Coloring Powder if you want to bring more Color to Your Silicone Mold.
  • EASY TO USE & GREAT RESULT – PERFECT FOR BEGINNERS! – Our Silicone Mold Making Kit includes 2 Parts of LOW VISCOSITY Liquid Silicone – 1:1 Ratio. Pour Part A and Part B Together and Stir Thoroughly, the Working Time is 5 Minutes!.
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • ... VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO silicone mold making ....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • 【POT LIFE: 40~50 MINUTES, CURE TIME:4-5 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【SHORE A 15 & LOW VISCOSITY FOR EASY MIXING & POURING】this 15 Slow mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material to make a mold, no need degassing, the mold finished with Sipolysun Silicone Rubber has great flexibility and easy to demold, this silicone for mold making kit is the most suitable hardness for making DIY arts molds between 1cm to 20 cm..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Ou....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • 【POT LIFE: 50 MINUTES, CURE TIME: 6 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
Check Stock

CRL PR03 Silicone Spray

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to use, features high quality ingredients, & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The specialized formula ensures that your projects come out just as you want them to!.
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds..
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. Once it is dry, the mold release allows the finished piece to be easily removed..
Check Stock

Silicone Mold Making Kit Liquid Silicone Rubber Bubble Free Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding Silicone for Resin Molds, Silicone Molds DIY (4kg/Gallon Kit)

  • ...on Material - Our translucent liquid silicone is a safe silicone material, non-toxic and no odor, very flexible, soft and clear with a shore hardness of 15A. To add color to your molds, you can mix the mold making silicone with mica powder to create a colorful mold!.
  • Easy Mixing & Pouring - This mold making silicone rubber kit includes part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, stir the silicone rubber thoroughly for 5 minutes for best results. Working time of 5 minutes at room temp..
  • Various Applications - Pixiss silicone for mold making is very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc. ATTENTION: DO NOT USE THIS MOLD SILICONE FOR FOOD. If you have any questions about our mold making kit please feel free to reach out..
  • Beginner Friendly - If you're interested in mold making, then look no further because our mold making kit is a perfect choice for you! No prior experience is necessary. Great activity to do with friends and family that you think would be interested in smooth on silicone mold making rubber. Cleaning Steps: If there's any spill, please clean with soapy water or rubbing alcohol..
  • Bubble Free - The bubbles in your cast....
Check Stock

Stoner E-236 Urethan Mold Release 1-12 oz can (Clear) (Clear)

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to use, features high quality ingredients, & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The specialized formula ensures that your projects come out just as you want them to!.
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds..
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. Once it is dry, the mold release allows the finished piece to be easily removed..
Check Stock

mitreapel Silicone Mold Release Spray (14.4 oz) Release Agent Aerosol Spray

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to use, features high quality ingredients, & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The specialized formula ensures that your projects come out just as you want them to!.
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds..
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. Once it is dry, the mold release allows the finished piece to be easily removed..
Check Stock

Polytek Pol-Ease 2500 Release Agent (12oz. Can)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

EnvironMolds Liquid Latex Mold Making Rubber 16-oz.

  • ✅ MULTI-USE latex liquid rubber. Used as a mold-making rubber to make flexible and durable latex molds to reproduce figurines, plaster moldings, statues, plaques, life castings and similar..
  • ✅ NO MIXING – Our one-part, liquid rubber air dries in 2-3 hours. It needs no mixing unlike mold making silicone rubber or even alginate molding powder..
  • ✅ BRUSHABLE APPLICATION—Brush on LayTex to reproduce the finest detail. Use soapy water to clean up and no vulcanization (no high heating) required..
  • ✅ NO RELEASE NEEDED LayTex needs no release on most materials allowing the user to keep his model’s surface clean and free of unwanted materials. Use on models made of metal, clay, plaster, wood, plastic, or glass. Release will be required when you use liquid latex for resin casting..
  • ✅ DURABLE & LONG LASTING LayTex liquid latex molds out last manmade rubber mold such as silicone and polyurethane rubbers. They are durable, reusable, and very economical to make..
Check Stock

Polytek Pol-Ease 2500 Release Agent (Case of 12 cans)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

MOOZON Sushi Mold Rice Ball Mold Cartoon Cat Pattern DIY Porphyra Sushi Bento Kitchen Tools for Home Party Cartoon Cute Bento Lunch Make

  • 【MATERIAL】- Made of food grade plastic, BPA free, Lead free, Mercury free, Phthalate free..
  • 【DIMENSION】- Bento Accessories: About 11*7*4.5 cm/ 4.3*2.8*1.8 inch.
  • Nori Cutter: About 11*7*4.5 cm / 4.3*2.8*1.8 inch.
  • 【Package Includes】- 1x rice ball mold, 2 x nori seaweed cutter, 1x rubber mat. Perfect sushi mold set create the cutest animal shape onigiri rice....
  • 【WIDE RANGE OF USES】- The cute cat rice ball mold can make a variety of cat expressions, cat claw and little fish. Embossed board can press....
  • 【100% MONEY BACK GUARANTEE】- We hope that you are 100% satisfied with our products. If we can help, please contact us at any time in the future..
Check Stock