Master Magnetics Magnet Sweeper Mini Push-Type with Release, 13\ Sweeping Width, Telescoping Handle, 1 Each, Part No. 07294

  • MORE EFFECTIVE THAN A PUSH BROOM - The best cleaning tool for metal debris on shop floors! This sweeper adds magnetic power to your clean up. Stop bending over with a broom and dustpan. This strong 13” magnet sweeper collects up to 1.6 lbs of metal.
  • ADJUSTABLE HANDLE LENGTH - Master Magnetics push-style sweepers have adjustable handles—from 27” to 40”. Push this rolling magnet like a carpet sweeper or a push broom. Yet, it’s easier to use than a vacuum or broom.
  • 4” WHEELS WITH RUBBER TREAD - With wheels on either side of this powerful cleaning tool, the Magnetic Sweeper easily sweeps up small metal objects. Each wheel measures 4” in diameter and features plastic rims and rubber treads for maneuverability.
  • 13” SWEEPING PATH - This heavy-duty rolling magnet boasts a 13” sweeping path with approximately 35 lbs of pull. The magnet can pick up an average of 225 8-penny nails, so you can sweep large, commercial areas without needing to clear the magnet.
  • QUICK-RELEASE FEATURE - Quickly clear the collected materials from the magnet by sliding the handle. This makes it easy to transfer debris to a recycling bin. This sweeper is the perfect tool for shops, garages, construction sites, and more.
Check Stock

PYLE PLD12WD 12-Inch 3200 Watt DVC Subwoofer

  • Custom Titanium Moulded Poly Cone - 2'' 4 Layer Dual Voice Coil - Nominal Impedance: Dual 4 Ohms.
  • Custom Grooved Specially Treated Rubber Surround - Moulded Plastic Gasket - Fs:25, Qms:2.68, Qes:0.90, Qts:0.68, Vas (Cu ft)2.730.
  • Diamond Cut Aluminum Die-Cast Basket - Spring Loaded Wire Connectors - SPL: 92 dB.
  • Dual Stacked Magnet Structure - 3200 Watts Peak Power - Overall Diameter: 13.20''.
  • Chrome Mesh Magnet Vent - Magnet Weight: 2 x 100 oz. - Mounting Depth: 5.20''.
Check Stock

Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, Universal VGA Graphics Card Holder

  • 【Easy to Use】It is very easy to use, just twist the screw up and lock the Locking Nut, it will work stably.
  • 【Screw Adjustment Design】Adjustable height to match various computer cases and motherboards. Supportable height range is 78-128mm..
  • 【Bottom Hidden Magnet Design】With magnet hidden in the base, it is easy for you to install and more stable standing in the chassis.
  • 【Non-Slip Rubber Pad】There are non-slip rubber pads on both ends, which is convenient for you to install without scratching the chassis..
  • 【All-aluminum Metal Material】Provides strong and long-lasting support. This is made of all-aluminum metal instead of plastic, can avoid the aging of plastic materials and can be used as a long-term replacement.
Check Stock

Car Vehicle Subwoofer Audio Speaker - 8 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, for Vehicle Stereo Sound System - Pyle PLBW84

  • ...ty or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28" mounting depth & 8.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone - Flat Progressive Spider - 600 Watt Max Power Handling - Mounting Depth: 4.28''.
  • Non-Fatiguing Big Rubber Suspension - New Wave-Like Rubber Gasket - Impedance:4 Ohm (Per Coil).
  • Bumped Vented Extended Pole Piece - 1.5'' High Temperature Dual Kapton Voice Coil - SPL: 83.5dB.
  • Silver Plated Terminal - Magnet Weight: 60 oz - Overall Diameter: 8.8''.
Check Stock

Disney Parks Minnie Mouse Bakery Vinyl Refrigerator Magnet Set of 4 Magnets

  • Everyone's favorite duck is featured on this PVC magnet, Donald Duck..
Check Stock

ULIBERMAGNET 4Pack Anti-Scratch Neodymium Magnet with Rubber Coated and M6 Male Thread,Super Strong Magnetic Mounting for Lighting,Camera,Tools and equipement

  • 【Much Stronger of Neodymium Rubber Coated Magnet】: 26lb Vertical Magnetic Pull Force On Base of 0.33''(10mm) Thickness Steel Plate due to....
  • 【No scratch and bigger friction of mounting magnet】: The Soft rubber can protect the magnet from damage , avoid scratch of painting surface and....
  • 【Much More Compatible Neodymium Cup Magnet with stud】: M6 standard male thread stud,much more compatible for kinds of hardware assembly. Great for....
  • 【Good Corrosion-Resistance of Rubber Coated Neodymium Magnet】: Ni+Cu+Ni Triple Layer good corrosion-resistance coating, the exterior rubber....
  • 【Package Includes of magnet with male thread】: 4pcs Rubber Coated Magnet 26lb +M6 Spring Washer+M6 Flat Washer+Nut included.
Check Stock

ULIBERMAGNET 4Pack Anti-Scratch Mounting Magnets Strong 24LB M6 Male Thread Stud Rubber Coated Neodymium Magnets with Stud for Mounting led Lighting Fixtures Holding Tools and Organiazation Items

  • 【Much Stronger of Neodymium Rubber Coated Magnet】: 24lb Vertical Magnetic Pull Force On Base of 0.33''(10mm) Thickness Steel Plate due to....
  • 【No scratch and bigger friction of mounting magnet】: The Soft rubber can protect the magnet from damage , avoid scratch of painting surface and....
  • 【Much More Compatible Neodymium Cup Magnet with stud】: M6 standard male thread stud,much more compatible for kinds of hardware assembly. Great for....
  • 【Good Corrosion-Resistance of Rubber Coated Neodymium Magnet】: Ni+Cu+Ni Triple Layer good corrosion-resistance coating, the exterior rubber....
  • 【Package Includes of magnet with male thread】: 4pcs Rubber Coated Magnet 24lb +M6 Spring Washer+M6 Flat Washer+Nut included.
Check Stock

Pair Rockville RMSTS80W 8″ 1000w Waterproof Marine Boat Speakers 2-Way White

  • Includes: Pair of 8” marine speakers. 16.4 feet of Speaker Wire. Mounting Screws..
  • Rockville RMSTS80W 8” 2-Way 1000 Watt Marine Boat Speakers in White (Pair). CEA Compliant Power Ratings. Power Rating: 500 Watts Peak / 250 Watts RMS Per Speaker. System Power: 1000 Watts Combined..
  • 8“ 2-Way Speaker System. Fully Marinized Against Salt & Fresh Water Conditions. Completely Waterproof and rustproof. Stainless Steel Terminals..
  • Molded ABS plastic basket (Our special plastic blend is un-breakable! it won’t crack!). Polypropylene Mica Injected Cone. Rubber Surround. High quality ferrite magnet. 1” inch Titanium Tweeter..
  • Oversized 1.5” CCAW Kapton Voice Coil. Large Magnet and Motor Structure. Pre-installed mounting screws included. Perfect for both marine, outdoor, and car use. Impedance: 4 Ohms..
Check Stock

Gorilla Grip Durable Kitchen Cutting Board Set of 3 and Dishwasher Clean and Dirty Magnet Sign, Large Food Chopping Boards, Magnets for Dish Washer in Size 7x2 , Both in Black Color, 2 Item Bundle

  • will not budge as the dishwasher is opened or closed.
  • also includes two adhesive dots that adhere to non magnetic appliances.
  • Durable Construction: magnet is commercial grade and designed to last.
  • rust and scratch resistant so it will stay looking great.
  • also features a plastic casing that makes it water resistant so water cannot permeate through.
Check Stock

XXHong Belt Magnetic Clips Heavy Duty Magnetic Tool Holder Black Magnet Belt Organizer for Screws Nails Screwdrivers Wrench Metal Accessories 2 PCs

  • Material: The belt magnet clip is made of nylon plastic and magnets. Users can take it anywhere for it's small and convenient..
  • Features: The clip is sturdy and durable, not easy to wear and tear. The magnet has a strong adsorption force. The rubber film on the surface can well protect the magnet and tools from scratches..
  • Objects for Use: Suitable for a variety of iron tools, such as screwdrivers, hammers, pliers, wrenches, nails, screws, etc..
  • No Installation Required: The product is easy to use and can be used directly through the belt. Really free your hands and make your work more efficient..
  • Packaging: 2 * Belt Magnet Clips are included in each package..
Check Stock

XXHong Belt Magnetic Clips Heavy Duty Magnetic Tool Holder Black Magnet Belt Organizer for Screws Nails Screwdrivers Wrench Metal Accessories 2 PCs

  • Material: The belt magnet clip is made of nylon plastic and magnets. Users can take it anywhere for it's small and convenient..
  • Features: The clip is sturdy and durable, not easy to wear and tear. The magnet has a strong adsorption force. The rubber film on the surface can well protect the magnet and tools from scratches..
  • Objects for Use: Suitable for a variety of iron tools, such as screwdrivers, hammers, pliers, wrenches, nails, screws, etc..
  • No Installation Required: The product is easy to use and can be used directly through the belt. Really free your hands and make your work more efficient..
  • Packaging: 2 * Belt Magnet Clips are included in each package..
Check Stock

novonest GPU Support Bracket,5V 3PIN ARGB Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket,Vertical GPU Mount,Transparent Acrylic,Side Neon Light,GH03ARGB(N)

  • 【Easy to Use】It is very easy to use, just twist the screw up and lock the Locking Nut, it will work stably.
  • 【Screw Adjustment Design】Adjustable height to match various computer cases and motherboards. Supportable height range is 78-128mm..
  • 【Bottom Hidden Magnet Design】With magnet hidden in the base, it is easy for you to install and more stable standing in the chassis.
  • 【Non-Slip Rubber Pad】There are non-slip rubber pads on both ends, which is convenient for you to install without scratching the chassis..
  • 【All-aluminum Metal Material】Provides strong and long-lasting support. This is made of all-aluminum metal instead of plastic, can avoid the aging of plastic materials and can be used as a long-term replacement.
Check Stock

Vietnam Gun Trucks (New Vanguard)

  • ...istol magnet measures 3,75” x 1,4” x 0.3” and can be discreetly mounted under your desk, used as a magnetic bedside holster or as a truck gun holder.
  • With all screws and anchors included for easy installation, the Kings Magnet magnetic gun holder ensures personal protection will always be within arm’s reach.
  • Our magnet gun mount features a smart rubber coating to protect your firearm against scratches and damage.
  • Each one of our gun magnets can confidently hold up to 43 lbs.
  • Better still with two or more gun mount magnets, our magnetic holster can even hold larger rifles and shotguns.
  • If you don’t love our magnet gun mount for car, home and office simply let us know what the issue is with your rubber coated magnets and we’ll do whatever it takes to make things right.
  • At Brand, we pride ourselves on excellent customer service and outstanding quality.
Check Stock