Categories

Best Ruien Oil Catch Can

TASAN RACING Universal Oil Catch Can with Oil Drain Cock Valve Baffled Reservoir Tank Air-Oil Separator, 2 Port, Aluminum, 150ml, Black

  • [WHAT'S THE OIL CATCH CAN FOR] Compact oil catch can was designed to separate oil particles from the PCV/CCV air that would normally have just been routed back to your intake. The internal air diverter turbulation the air longer and ensures all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 50-micron bronze filter to the intake..
  • [LESS FUEL USED] An internal baffle keeps the collected oil from splashing around under race conditions. For maximum fitment options, the top mounting setup allows the can to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for a return to the oil pan. The can is also washable, unlike many other cans that require you to replace your filtration system..
  • [PREMIUM ALUMINUM MATERIAL] Polish universal oil catch can is made of lightweight aluminum alloy T-6061 for strong strength and good durability (Notice: It's easy to scratch because it's made of aluminum, do not affect usage effect). Anodized finished body has great appearance. The maxed capacity of the tank is 5 oz (about 150ml), small but easy to clean. Inlet/Outlet: 3/8" NPT, Drain Plug Thread Size: 3/8" NPT..
  • [UPGRADED TECHNOLOGY AND NOTICE] Improved process, upgraded products reduce t....
Check Stock

ALAVENTE Universal Oil Catch Can Tank with Breather 400ml Aluminum Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit Black

  • √ STRENGTH & DURABILITY - The oil catch can breather made of high quality 0046 aluminum to provide you with higher strength and durability. And it's also very lightweight, universal for most car..
  • √ PRESERVE ENGINE LIFE&INCREASES HORSEPOWER - This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean, Increases horsepower and preserve engine life.
  • √ HARD TO OIL LEAKAGE & EASY TO CLEAN - Large oil catch can with drain valve, it is fully tig welded and thread come with o-ring gasket to prevents oil leakage.You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily.
  • √ 2 METHODS OF INSTALLATION - Come with air filter, you could use it as vented system, or you could ignore it. Any way you need. There is also a washable stainless screw on filter / breather with hose clamp to stop it coming loose with vibration.
  • √ 400ML CAPACITY for UNIVERSAL CAR - The capacity is 400ml, enough for daily use.
Check Stock

PQY Oil Catch Can Baffled 2 Port Oil Catch Tank Kit with Drain Valve Universal Air Oil Separator

  • [Collect Oil & Keep Engine Clean]-The oil collection tank will collect the oil and moisture in the PCV/CCV air to prevent carbon and sludge in the intake system and the engine, keep the engine clean and extend its service life..
  • [ Function ]-- Mostly it is used to trap the oil that comes with gases from the combustion process and thus prevent accumulation in the valves in GDI engines. Preventing misfires due to carbon accumulation in the valves..
  • [Superior Quality]-Made of high quality T6061 aluminum with stylish appearance. With higher strength and durability, light weight and corrosion resistance. (Silver Oil Catch Can Diameter: 2.68in / 68.25mm. Height: 4.27in / 108.66 mm.).
  • [ You Will Get ]-- Fits most car oil catch tank. Catch can kits are supplied with fuel hoses, saving you time and money. Two different size adapters for different size hoses with O-ring Gaskets to prevent fuel leaks (use hose clamp reinforcements to keep hoses from falling off).
  • If you encounter any problems in installing the red oil catch can, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock

Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder

  • ★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
  • ★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
  • ★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
  • ★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
  • ★ ATTENTION- 100% product quality assurance. Please feel free t....
Check Stock

SPELAB Oil Catch Can Breather Tank Reservoir 0.5L Polished Aluminum with 19mm 3/4” Barb Inlet Outlet Silver

  • ✿COMPACT DESIGN:the catch can has a small body,can save the pace in your engine..
  • ✿UNIVERSAL FITTMENT:the catch can can be used on many cars.Just make sure there is enough space in your engine to install it ..
  • ✿MERIT:Separates oil particles from PCV/CCV air using 50 micron bronze filter. Defends intercooler, intake system and essential components from oil blow-by.Helps maintain proper octane levels to reduce potential detonation..
  • ✿CHEAPPER BUT STURDY:the PQY oil catch can is made of high quality aluminum, black coating.Textured and durable..
  • ✿WARRANTY:PQY provides 1 year warranty for the catch can ,if you have any question ,please send us mail and we will respond you in 24 hours except weekend and holiday..
Check Stock

Vincos Black Polish Baffled Universal Aluminum Oil Catch Can Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit 3/8' 9/16' 400ml

  • ✔ 【BILLET AEROSPACE 6061 ALUMINUM】Made of High Quality Aluminum for Enhanced Strength and Durability.Recommend this mod to anyone who really cars about long term performance..
  • ✔ 【INCREASES HORSEPOWER & PRESERVE ENGINE LIFE & KEEP ENGINE CLEAN】This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine.The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean , Increases horsepower and Preserve Engine Life.
  • ✔ 【PREVENTS OIL LEAKAGE】Fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage..
  • ✔ 【REUSABLE & EASY TO CLEAN】you can actually clean the catch can very easily even without dismounting it, you just need to unscrew the bottom part of the reservoir and you have complete access to clean everything..
  • ✔ 【Accessory】9mm & 15mm Fitting / size 4.25" high x 2.25" diameter , 9MM and 15MM fitting will work with any car.
Check Stock

RULLINE Oil Catch can kit,air Oil Separator,Oil Catch Can Tank Universal Reservoir with Breather Hose Kit Aluminum Polish Baffled 350ml Black

  • ★[ Capture Oil & Keep Engine Clean ]-- The oil catch tank will catch the oil and moisture from PCV/CCV air, prevent carbon and sludge build-up in....
  • ★[350ML Capacity & Universal ]-- The capacity is 350ml,enough for daily use.Universal for most cars and small parts of motorcycles..
  • ★[ Come with Oil Dipstick ] -- It is convenient to check the fluid level in catch can by oil dipstick without opening it frequently.
  • ★[ Superior Quality ] -- Made of high quality 0046 aluminum for added strength and durability, fully tig welded, lightweight and corrosion resistant.
  • ★[ 2 Types Of Installation ]-- Easy to install oil tank with breather filter as a vent system or without breather filter as a seal can, all for your....
Check Stock

PQY Oil Catch Can Baffled 2 Port Oil Catch Tank Kit Universal Air Oil Separator

  • ✿COMPACT DESIGN:the catch can has a small body,can save the pace in your engine..
  • ✿UNIVERSAL FITTMENT:the catch can can be used on many cars.Just make sure there is enough space in your engine to install it ..
  • ✿MERIT:Separates oil particles from PCV/CCV air using 50 micron bronze filter. Defends intercooler, intake system and essential components from oil....
  • ✿CHEAPPER BUT STURDY:the PQY oil catch can is made of 6061 aluminum can features M16 x 1.5 threads at the inlet, outlet, and drain area and includes....
  • ✿PQY CUSTOMER SERVICE：if you have any question ,please send us mail and we will respond you in 24 hours except weekend and holiday..
Check Stock

EVIL ENERGY 10AN Baffled Oil Catch Can,Oil Breather Tank with Valve,750ML Universal Aluminum Black

  • [Size] Breather catch can volume:750ML,The Fittings thread size of 10an is 7/8-14 UNF,Bottom pressure relief valve thread is 3/8 NPT..
  • [Universal]It can be applied to most cars, making sure there's enough room for Installation..
  • [Drain Valve] A drain valve at the bottom of the oil catch can makes it easier to clean and reuse..
  • [Function]Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean, 10AN oil catch can keep your engine....
  • [Warranty] EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

muge racing Universal Oil Catch Can Tank Kit Polish Baffled Reservoir with Breather Filter with 3/8' Fuel Line,Aluminum,Red,400ml

  • √ UNIVERSAL&400ML - The air oil separator catch can kit fits for most cars and small parts of motorcycles. And the capacity of the polish baffled reservoir is 400ml,enough for daily use..
  • √ HIGH QUALITY - The oil catch can is made of lightweight aluminum for strong strength and durability,(NOTE:It's easy to scratch because it's made of aluminum, do not affect usage effect,But Any questions,please feel free to contact us to solve your problem).Anodized finished body has great appearance..
  • √ FUNCTION - Collect steam from the crankcase,Reduce the amount of steam entering the intake branch,Reduce the probability of secondary combustion,Reduce carbon deposition..
  • √ UPGRADE STRUCTURE - The baffle could cool hot oil vapor and turn into liquid and catching the oil and moisture oil vapor, keeps engine clean and prolongs engine life.The hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently,You could use the breather filter as a vented..
  • √ 2 TYPES OF INSTALLATION - Easy to install oil catch can with breather filter as a vent system or without breather filter as a....
Check Stock

2011-2019 F150 2.7EB 3.5EB 5.0 Passenger Side JLT Oil Separator Black

  • Breather oil catch can: You can install the oil catch can with Breather Filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can, all for your option..
  • Universal: Air Breather oil catch can be applied to most cars, making sure there's enough room for installation..
  • Improvement: Updated the fuel hose to NBR. Built in dipstick to check fluid level without opening the can..
  • Size and Material: Diameter: 2.68in / 68mm. Height: 4.45in / 113 mm. The thread of the inlet and outlet is M16*1.5. Hose length: 31.5in / 0.8m. It's made of aluminium allow T-6061, please notice that aluminum alloy is easy to scratch, doesn't affect the usage effect..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Dokili 1200ml 1.2L Twin Baffle Dual Filter Engine Oil Catch Can Tank Reservoir AN8

  • 【Top Quality】Made Of High Quality Aluminum Sheet, Tig Welded Construction. This Oil Catch Can You Keep Your Engine Clean Under Hard Driving Conditions..
  • 【Capacity】1.2L Large capacity with bigger ports, ideal for big cc engine. Width : 100mm. Overall Height : 160mm. Inlets / Outlets Size : Female -8AN fittings/bungs.
  • 【Function】This Oil Catch Tank Will Collect Oil And Moisture Blow By Gases From Pcv Valve Or Engine Valve Cover Ports Going To Intake System.Prolongs your engine life by filtering the oil mist and other substances contained in blow-by gas.
  • 【Features】Petcock Drainer At The Bottom For Easy Draining. Perfect For Turbo & Non Turbo Engines..
  • 【Package includes】 1 x Oil Catch Tank w/ two AN8 Hose Fitting Adapters.
Check Stock

RULLINE Oil Catch Can Square Shape Aluminum Reservoir with Breather Filter 500ML Black

  • ❤【 Capture Oil & Keep Engine Clean 】----- The oil tank could catch the oil and moisture from PCV/CCV air, prevent misfires due to carbon....
  • ❤【 Billet 6061 Aluminum 】-- Oil catch can made of high quality aluminum for enhanced strength and durability, lightweight and suitable for....
  • ❤【 Check oil level clearly 】----- Clear Tube Indicator is easy to check if the tank is full without disassembling it in order to remove excess....
  • ❤【 Breather Enhance filtering 】 ----- Breather as a vent system, could traps oil and dust, allow air to escape freely which enhance filtering.
  • ❤【 2 Types Of Easy Installation】----- Easy to install oil tank with or without breather, all for your option..
Check Stock