Categories

Best Rust Resistant Manifold

Air Lift 25856 Load Controller-2 Air Bags Independently

  • Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets.
  • Compact, weather-resistant and corrosion-proof, relay integrated, single path manifold.
  • Free IOS and Android mobile app easily connects with the bluetooth-enabled manifold.
  • Easy installation, installs direct to battery in around 1 hour.
  • Manifold and controller software updates provided over the Air via free mobile app.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

SPW Hunter Premium Valve Manifold System PGV101GS with Flow Control - Heavy Duty Action Machining Parts - 3/4'' or 1'' Slip PGV-101 (4 Zone)

  • Premium Manifold with Hunter 1" Slip Valves With Flow Control. DryConn waterproof connectors and a flashlight keychain included!.
  • The Action inlet and all outlets fittings can accept 3/4" PVC pipe OR 1" PVC Coupling for 1" Pipe. Action Manifold parts are premium, rugged, heavy-duty, AND made in the USA!.
  • Action Machining manifold systems are constructed out of thick schedule 80 PVC. O-Ring sealed for tool-less installation. 235 Max W.P. @ 73°. Buttress thread for a strong seal. Fully unionized..
  • Never cut your system apart again to change a junk valve and easily expand your manifold system..
  • Hunter PGV valve are high-grade, corrosive and UV-resistant PVC construction, glass reinforced jarring and a rugged double-beaded, leak-proof diaphragm with support to prevent stress failure.
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

YELLOW JACKET 42004 Series 41 Manifold with 3-1/8\ Gauges with Hoses

  • [Feature]-Manifold Block Splitter mainly used to connect multiple joints to supply air for multiple pipelines, and one air intake hole to distribute multiple air outlets.Pipeline control and use are more convenient.
  • [Advantage]-Air Compressor Splitter's air outlet hole can be easily adapted to any male connector,and the most suitable connector can be selected according to your needs.
  • The surface hardness of the product is large, wear-resistant and rust-proof, and the surface is frosted and not easy to leak.
  • [Easy to install]-Installing is easy to insert or pull out , All ports are in the same size.
  • [Application]-Quick Connect Air Hose Splitter Coupler is widely used for air pumps,cylinders,compressors,vacuum engines,etc.
Check Stock

Eastwood Matte Silver Heat Resistant Paint | High Heat Temperature Protection up to 1400° | Engine Cover or Exhaust Paint | Brake Caliper Paint | Added Corrosion & UV Resistance | 1 Pint 6 sq. ft.

  • ... car components such as your exhaust, brake caliper, manifold, headers or engine cover. Extend or renew the lifetime of any surface exposed to high heat temperatures with a durable silver sheen which last for years..
  • BEST USE: Apply the pint size Eastwood matte silver heat resistant paint with either a spray gun or paint brush. Once applied the high temperature resistance paint will cure with heat. Suitable for adding UV & rust protection to new parts such as stainless steel exhausts, or use to revitalize old tired looking auto components such as an engine cover, or manifold..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting.Call a physician immediately.Avo....
Check Stock

2-Way Pneumatic Splitter 2 Way Pneumatic Manifold Air Distribution Block Pneumatic Air Compressor Manifold Fitting（1 Pcs AL-2）

  • 【Package Included】1 Pcs 2 Way Manifold Block.
  • Number Of Threaded Ports : 5 Ports,Fixing Hole：2 Ports..
  • 【Size】Length:75mm/2.95inch,Width:30mm/1.18inch,Height:31mm/1.22inch.Main Channel Diameter:21mm（G1/2inch）,Branch Channel Diameter:13mm（G1/4inch）.Mounting Hole Diameter:5mm/0.19inch..
  • 【Material】Use High-Quality Aluminum, Rust-Proof And Wear-Resistant, High Pressure Resistance, And Strong Sealing..
  • 【Feature】Easy Installation, Stable Performance, High Efficiency And Durability, Sustainable Use..
  • 【Application】Suitable For Branch Outlets Of Air Compressors Or Gas Storage Equipment, Or As a Supporting Part Of Machinery And Equipment, And Is Generally Installed At The Gas Terminal Branch Interface Or Engineering Wiring Pipeline Branch..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Vacuum Block Intake, 6 Port Vacuum Block Intake Manifold Kit Fuel Wastegate Turbo Boost 1/8NPT for Racing

  • 6 Port Block Intake: Ideal for connecting pressurized controllers, meters and any component that requires a separate vacuum source. You can also use tape to meet fuel and oil requirements..
  • High Quality: The new universal supercharger/vacuum manifold uses high-quality CNC machine tools to process T6061 billet aluminum, which is rust-proof and durable..
  • An additional vacuum source is required: the billet vacuum manifold is a good additional tuner, and the design of the supercharger car and the single throttle body requires multiple vacuum sources..
  • Great Aftermarket Replacement: Includes 6X 1 / 8NPT aluminum accessory ports for boost controllers, map sensors, fuel pressure regulators, boosters, blow valves and any other fuel/ignition management components that require a vacuum source..
  • Quality Assurance: 12 months worry-free warranty.We are a professional seller. Please feel free to contact us if you meet any trouble in using our product..
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • STRAIGHT MANIFOLD - Milled red aluminium body with nickel plating steel quick connectors for added durability and a leak free fit. The manifold body is made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings..
  • COUPLER AND PLUG - 1/4" I/M type coupler and plug are made of nickle plated steel with anodized aluminum sleeves. The steel plug is heat treated to reduce abrasion on critical mating surfaces. Couplers are designed for high corrosion resistance, longer life and smoother operation..
  • INTERCHANGEABLE - Hromee air manifold kit has an aluminum In Line style with an inlet of 1/4 inch NPT and 4 outlets of 1/4 inch NPT sizes. It is compatible with Industrial "M", "D", and "I/M" type plugs and couplers. The max working pressure is 300 PSI..
  • SAVE YOUR TIME - This air tool allows you to connect and operate three tools from a single compressor and no need to disconnect your line when you want to switch tools. It also allows you to be able to connect to different types of connections without changing tools and hoses. You can also work with 4 different tools at the same time. You will get the job well done with ease in a less time..
  • EASY TO USE - The pneumatic manifold is equipped with quick connect....
Check Stock