Categories

Best Rust resistant Sink Trap

Grease One For Me

  • HIGH-GRADE PLASTIC: Our restaurant grease trap is made of a sturdy plastic material. There are no welded seams which ensure that there will be no....
  • MANAGEABLE DIMENSIONS: This grease trap for sink overall dimensions are 19.5-inch x 16.75-inch x 15.5-inch which allows you to easily fit it under....
  • EASY TO INSTALL: Just connect the tubing of the sink and dishwasher to the grease trap inlet and then drain the outlet of the grease intercepter....
  • THICK WALLS: The 1/4-inch thick plastic walls make this grease trap for restaurants highly durable and offer protection against rust, corrosion, or....
Check Stock

48 PCS Lint Traps Washing Machine Lint Trap Stainless Steel lint Snare Traps Laundry Mesh Washer Hose Filter Washing Machine Lint Snare, Lint Traps Hose Screen Filter Catcher with 48 Nylon Cable Ties

  • ... diameter hoses. The small mesh holes in the Big Kitchen Sink traps are the best size for catching lint. These washing machine lint traps will not fall apart..
  • Washer Hose Lint Traps Material: Lint traps are made with high-quality 304 stainless steel instead of ordinary 201 stainless steel. These lint traps will not rust, do not readily tear, and are durable, Prevent clogging of drains. Rustproof and long lasting, can effectively filter cotton fluff in the washing water to prevent clogging your laundry sink..
  • Easy Installation lint catcher: Washer Sink Screen Filter is very easy to install, traps can slips easily onto end of hose, no tools needed for installation, easy to put on the discharge hose and they are easy to remove. Nylon cable tie is unlocking design. Do not use these traps with stand-pipe drains or on pipes that go into the wall..
  • Washing Machine Lint Snare Trap Wide range of use: Good for washing machine hoses that empty into a basin, sink, bathtub, etc. Can catching lint, hair, pieces of tissue, etc. So will greatly reduce the risk of drain clogging. Prevent Pipe Plugging, Laundry water often contains a lot of clothing fibers, cotton, paper debris, hair and other debris, may cause sink blockage. Lint filter can help you solve this problem,....
Check Stock

Woodstock D4202 2-Inch by 10-Foot Clear Hose

  • ✔ 1-1/2" P-trap is one of the double sink drain pipe fittings, used to connect the kitchen sink drain and the garbage disposal. Also suitable for the sink of bathrooms, toilets, bathtub and salons..
  • ✔ The drain pipe is made of flexible material and corrugated stretch design, adjustable between 7.8 and 25.6 inches. It can be bent and stretched at will in a narrow sink tank..
  • ✔ Made of professional engineering polypropylene material, which has corrosion resistance, 212°F high temperature resistance, acid and alkali resistance, and not easy to crack..
  • ✔ The inner diameter of the nut at both ends of the P-trap is 1.78 "/ 45.2mm, which is convenient to connect with the drain connector. The diameter of the corrugated hose is 1-1/2inch. (Please make sure the diameter of your drain connector is 1.78" before purchasing.).
  • ✔ When installing, put on silicone sealing rings to prevent water leakage. You can fixed the pipe with our S-shaped buckle to maintain the shape..
Check Stock

Eastman 35376 P-Trap with Adapter, 1-1/2 inch, 2.1 x 5 x 11, White

  • ✅FUNCTIONALITY- P-trap plays the important role of collecting debris from the sink drain, that would otherwise clog the entire plumbing system if it would pass through..
  • ✅QUALITY- Made of heavy-duty polypropylene that provides high resistance from household chemicals..
  • ✅UNIVERSAL- Compatible with under sink installations for kitchens and bathrooms..
  • ✅COMPLETE- This drain pipe includes a trap adapter and washers..
  • ✅MEASUREMENT- Includes a 1-1/2 inch x 1-1/4 inch p-trap adapter and 1-1/2 inch washers..
Check Stock

Sumind 30 Pack Nylon Lint Trap Washing Machine Lint Fabric Mesh Snare Washer Lint Catcher with 30 Pack Cable Ties

  • ... lint from clogging laundry tub or sink by catching lint, hair, and even lost tissues.
  • Lint trap expanded size(approx.): 9.5 inch in length, 3.15 inch in width.
  • Fit for most washing machine discharge hoses.
  • Sturdy material: the mesh lint filter and the cable tie are made of nylon, have no rust like the metal ones.
  • Strong and durable, can provide loads for many times.
  • Easy to use: mesh snare is easy to put on the discharge hose, then use cable zip tie to lock it securely.
  • It's also easy to remove them by pressing the release button on the tie, without tools needed.
  • Package contains: 30 x lint trap cleaner and 30 x self-locking zip tie.
  • Note: the mesh trap does not fit for the hose which empties into or connects to a stand pipeDescription.
  • 30 Pack nylon washing machine lint trap snare mesh with 30 pack ties.
  • Easily slides the mesh filter's open end onto the washing machine's discharge hose.
  • Comes with 7.68 inch long cable tie to lock the lint mesh and hose for a secure hold.
  • No tools needed for installation, easy to use..
  • Press the release button on the middle of the cable tie's head, and pull apart..
  • You can find a simpler method about how to install or remove the....
Check Stock

Eastman 35002 22-Gauge Thick Brass P-Trap 1-1/4-inch with Flange for Tubular Drain Applications, Polished Chrome

  • BATH AND KITCHEN P-TRAP: P-trap is designed for use in tubular drain applications.
  • P-trap plays the important role of collecting debris from the sink drain, which would otherwise clog the entire plumbing system if it would pass through.
  • UNIVERSAL: P-traps are up to code and widely used in under sink installation for kitchens and bathrooms.
  • DURABLE: Bathroom P-Trap is constructed of 22-gauge chrome-plated brass for longer-lasting use, and has a high resistance to heat.
  • EASY TO INSTALL: Plumbing fittings feature a slip joint connection and an included flange for easy installation.
  • SPECS: Eastman’s 22-gauge P-Trap with Flange is designed for use in tubular drain applications, and features a 7-1/2 inch wall extension.
Check Stock

Sinkology P1U-1212BC Pollock Undermount Handmade Pure Solid 0-Hole, 12\

  • 【HEAVY DUTY FOR LONG TIME USE】-Hand washing basin Made of high quality stainless steel, sturdy, durable and rust-resistant. Suitable for Home kitchen, bar, commercial restaurant, laundry, janitorial room, cafeteria, garage, school, hospital, hotel, park, etc.
  • 【INGENIOUS DETAILS】- The upgraded stainless steel wall mounted hand sink designed with rounded edges and an approximately rectangular sink body which has R10 interior corner radius. Increased capacity and still easy to clean.
  • 【PRACTICAL DESIGN】- With 7-5/8" tall backsplash, it can keep your walls or cabinets dry and free from splashes. A Hot&Cold gooseneck chrome faucet included and it can be rotated 360 degree for your convenience.
  • 【EASY INSTALLATION】- Faucet connection: Standard 1/2" male pipe thread. The drain connection is made to fit a standard 1-1/2" tail piece/trap. Wall mount bracket for easy installation. Product Dimensions: 17" W x 15" D x 14" H. Sink Dimensions: 14" W x 10" D x 6" H.
  • 【WORRY-FREE WARRANTY】- Backed by a LIFETIME LIMITED WARRANTY and the always exceptional Bonnlo customer service promise. Don't hesitate any longer and enjoy it now.
Check Stock

12 Pack of Washing Machine Lint Traps. Comes with 12 Ties. Attach to Your Washer Sink Hose and Allow the Metal Mesh Trap to Filter the Laundry Water. Stainless Steel and Rust Proof.

  • NO NEED TO DOUBLE UP: Some other companies sell cheap traps or lint socks but then you must use TWO traps / socks at once. The small mesh holes in the Big Kitchen Sink traps are the best size for catching lint.: These washing machine lint traps will not fall apart.
  • QUALITY: These Washing Machine Lint traps will NOT rust or fall apart. They are made from stainless steel..
  • HOW TO USE: The traps work on a washing machine hose that drains into a laundry room sink. Do not use these traps with stand-pipe drains or on pipes that go into the wall..
  • GUARANTEE: Money back guarantee. If you are not happy with the lint traps / screens you can ask for a full refund.Description12 pack of washing machine lint traps - comes with 12 ties / clamps / cords these washing machine lint traps were created to keep lint, hair, and even "lost" tissues from clogging your laundry sink. Normally, when a washing machine drains into a laundry sink (also called a slop sink) you run the risk of clogging the drain. These traps will greatly reduce that risk by catching lint, pieces of tissue, etc. One trap will last about one month for a family of 2. How long a trap lasts will depend on how much laundry you do and the types of fabrics you are washing. Traps are easy to put on the discha....
Check Stock

XuSha US Stock Commercial Grease Trap 25lbs 13GPM Interceptor Stainless Steel for Restaurant Kitchen, Side Inlet

  • ...n 3-5 days.【DIMENSION】- 24" x 12" x 11" (L * W * H). Connection size (inlet & oulet): 1.77 Inches / 5 cm. Length of the threaded pipe: 78 cm / 30.4 Inches. Flowing speed up to 13 Gallons Per Minute (G.P.M.).
  • ❤【MATERIAL】- Made of heavy duty 1.2 mm thickness stainless steel, which is strong and durable, anti-rust, anti-corrosion, not easily deformed. The removable filter basket can easily remove the collected residual waste. The threaded pipe is tightly installed with the grease trap, and the locking devices on both sides to prevent leakage..
  • ❤【PRINCIPLE】- Waste water flows into the grease trap from the sink, the fats, oils and grease will rise to the surface and be collected between the baffles, and the solid particles will sink. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • ❤【EASY TO INSTALL】- Connect the pipe run from the sinks and dishwasher to the Grease Trap inlet.Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school or small sink or dishwasher applications..
  • ❤【PRECAUTIONS】- 1. When heating with electricity, water must be immersed in the heating dev....
Check Stock

GORDEE Bathroom Basin Sink Bottle Trap Waste Pipe 1-1/4 inch Slip Inlet Drain Tube Kit Lavatory Adjustable Basin Sink Waste Drain P-Trap Kit General US/CA Standard Matte Black

  • Sturdy Brass Construction, deodorization and sanitary use. Modern and contemporary design provides a clean compact solution to exposed drain....
  • Matte Black Surface Finished, Rust-resistant. Modern and contemporary design provides a clean compact solution to exposed drain applications..
  • 1-1/4 inch Slip Inlet. Extension Tub included. 3.15 inch adjustable height to fit your sink..
  • EXTRA WARRANTY: We ensure 100% satisfaction and offer a life-time warranty on quality issues, along with 60-day money back guarantee..
  • Bathroom basin brushed Chrome bottle P Trap sink drain strainer pedestal sink stainless steel metal water bottle tub drain cover..
Check Stock

HANEBATH Brass Round Bottle P-Trap 1 1/4, Adjustable Bathroom Basin Sink Waste Trap Drain Kit, Matte Black

  • PREMIUM MATERIAL – The Bottle Trap Body is Solid Brass Constructed, Rustproof, Anti-corrosion and Durable. With Matte Black Finished, Matches with other brands Matte Black Bathroom Fixtures..
  • HIGH APPLICABILITY – The Sink Trap Kit Fits US Plumbing Standard, 1-1/4-inch Diameter Slip Inlet, 11-3/4-inch Extension Tube, 4.65” - 7.80” inches Adjustable Height to Fit your Basin Sink..
  • MODERN ROUND DESGNE – Compare to Traditional Trap, The Contemporary P-trap Kit is a Perfect Decorative Alternative to Enhance the Overall Look of your Bathroom Above-Counter Vessel Sinks..
  • DETACHABLE CAP – The Bottle P Trap Kit has Anti-Clogging Function to Prevent Hair and other Debris into Drains. The Trap Cap is Removable and Easy to Clean..
  • EASY TO INSTALL – The Ptrap Kit is Easily Mounted under the Lavatory Sink without Professional Plumbing Help, Works with Standard Sink Drain Assembly with & without Overflow..
Check Stock

HYEASTR Waterfall Bathroom Faucet Single Handle Bathroom Sink Faucet with Overflow Pop Up Drain & Supply Lines Brushed Nickel 1 or 3 Hole

  • ...t comes with an overflow drain and quality hose. Bathroom faucet with waterfall spout that provides a beautiful water presentation.Improve the style of the bathroom.（For holes larger than 1.25 inches only）.
  • [Sturdy Stainless Steel Material]-- Bathroom faucet is made of lead-free stainless steel for superior rust resistance. Stainless steel single handle for durability and safety! Wanhai ceramic spool has withstood 500,000 on/off tests and will never drip. Our product is compatible with 1-hole or 4-inch 3-hole installations.
  • [Quality Hoses]--The inner tube of our hoses is made of PEX, guaranteed safe for drinking water. With the standard 9/16 fitting (made of lead-free brass, of course, safe for drinking water!) , you can easily connect our hoses to your shut-off valves..
  • [Pop Up Drain]--A robust Stainless Steel overflow pop up drainin stopper. for 1-3/4" & 1-5/8" sink drain hole. Standard 1-1/4 inch tail piece, easy joint to bottle p trap or flexible sink pipe..
  • [EASY TO INSTALL]-- The simple design makes this product suitable for a variety of decorating styles such as decorating your hand basin sink, vanity sink, RV bathroom sink, and more places you can think of! Please make sure your sink fits before installation. Mounting hole diameter: 1.29''-1.....
Check Stock

Cinsda Flexible Sink Drain Pipe, 1-1/2 P-trap with Adapter, Expandable Tubular Drain Tubing Pipe, Adjustable P Trap for Kitchen Sink Drain & Garbage Disposal

  • ✔ 1-1/2″ P-trap is one of the double sink drain pipe fittings, used to connect the kitchen sink drain and the garbage disposal. Also suitable for the sink of bathrooms, toilets, bathtub and salons..
  • ✔ The drain pipe is made of flexible material and corrugated stretch design, adjustable between 7.8 and 25.6 inches. It can be bent and stretched at will in a narrow sink tank..
  • ✔ Made of professional engineering polypropylene material, which has corrosion resistance, 212°F high temperature resistance, acid and alkali resistance, and not easy to crack..
  • ✔ The inner diameter of the nut at both ends of the P-trap is 1.78 “/ 45.2mm, which is convenient to connect with the drain connector. The diameter of the corrugated hose is 1-1/2inch. (Please make sure the diameter of your drain connector is 1.78” before purchasing.).
  • ✔ When installing, put on silicone sealing rings to prevent water leakage. You can fixed the pipe with our S-shaped buckle to maintain the shape..
Check Stock