Categories

Best S Series Nozzle

E-outstanding Mig Welding Nozzle Shroud Reamer Cleaner Torch Nozzle GMAW Spatter Slag Removal Welder Tool

  • Premium quality Acetylene welding brazing nozzle with W-J mixer for Victor J series handles..
  • General purpose welding & preheating one-piece nozzle tip and mixer W-J. Available orifice size: #0, #1, #2, #3 and #4..
  • Copper elbow tip and long cone flame. Spiral mixer blends oxygen and fuel. Double O-ring sealed..
  • Use with Victor light duty W-J series handles and other aftermarket handles compatible with Victor..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Miele Triflex HX1 Plus Cordless Stick Vacuum Cleaner, 60 min runtime, Obsidian Black / Red

  • Strong cleaning performance: Triflex HX1 cordless vacuum cleaner is as strong as Miele’s most powerful corded vacuum series, built for optimal cleaning results on all floors.
  • Unmatched 3in1 flexibility: Switch effortlessly between three modes - Comfort, Reach and Compact - and reach every part of your home with ease, thanks to the Triflex 3in1 patented design.
  • Up to 60 minutes runtime: Replaceable VARTA Li-ion battery provides uninterrupted cleaning for large spaces and additional accessories wall bracket, SPD 20 upholstery nozzle, crevice nozzle.
  • Equipped with an extra-wide electrobrush Multi Floor XXL floorhead has automatic floor detection and additional accessories include: wall bracket, SPD 20 upholstery nozzle, crevice nozzle.
  • Maintenance-free HEPA Lifetime Filter: 99.999% dust retention capacity, made to capture fine dust, allergens and viruses, therefore suitable for allergy sufferers and pet owners.
Check Stock

HUNTER Grey Low Angle Nozzle Rack for PGP-ADJ Series

  • Tree of 8 Hunter Grey Nozzles for PGP-ADJ series.
  • DOES NOT fit PGP-04 Ultra or I-Series heads..
  • Nozzle tree is the newer "Ultra" design to be used for PGP-ADJ.
  • Will ONLY fit PGP-ADJ (red nozzle heads).
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Skat Blast S-35-S Small Trigger-Operated Power Gun for Skat Blast Sandblasting Cabinets, Made in USA

  • Skat Blast "High-Velocity" S-35 Series Power Gun is trigger operated and designed especially for siphon blasting. Can be used to improve performance with old-style S-25 Skat Blast Gun and other siphon-fed trigger cabinets. Sturdy and dependable, features include larger direct air passages for increased air volume and better suction. This results in a stronger, more powerful blast, so powerful, it is often mistaken for a pressure blaster..
  • Plus, ergonomic handle and full-hand trigger let you "feather" the blast for special applications or use "full blast" for heavy rust and paint removal. (More comfortable to hold and more durable than finger control type.) Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle..
  • Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 1/4" standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose..
  • The S-35 Series Power Gun is used with all trigger-operated Skat Blast Cabinets. Complete with nozzle and air jet installed in gun, t....
Check Stock

Skat Blast S-35-M Medium Trigger-Operated Power Gun for Skat Blast Sandblasting Cabinets, Made in USA

  • Skat Blast "High-Velocity" S-35 Series Power Gun is trigger operated and designed especially for siphon blasting. Can be used to improve performance with old-style S-25 Skat Blast Gun and other siphon-fed trigger cabinets. Sturdy and dependable, features include larger direct air passages for increased air volume and better suction. This results in a stronger, more powerful blast, so powerful, it is often mistaken for a pressure blaster..
  • Plus, ergonomic handle and full-hand trigger let you "feather" the blast for special applications or use "full blast" for heavy rust and paint removal. (More comfortable to hold and more durable than finger control type.) Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle..
  • Stainless steel valve stem with a case-hardened steel valve stem guide make this gun the smoothest operating trigger gun on the market. Has 1/4" standard female pipe thread for your air inlet hose at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose..
  • The S-35 Series Power Gun is used with all trigger-operated Skat Blast Cabinets. Complete with nozzle and air jet installed in gun, t....
Check Stock

Weller Tip, Soldering Iron, Screwdriver, 0.25In - CT6E7

  • Price For: Each Tip / Nozzle Width: 6.35mm Tip / Nozzle Style: Screwdriver For Use With: Weller W100PG and W100P3 Soldering Irons Series: CT6 Tip / Nozzle Length: 1.37" Tip / Nozzle Thickness: 0.42" RoHS Compliant: Yes.
Check Stock

Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet

  • Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
  • Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
  • Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
  • Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
  • Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..
Check Stock

Hunter Pro Spray Shut-Off Nozzle PS Ultra Hunter 916400SP

  • Shut-Off nozzle only (spray body not included)..
  • Fits all Hunter Pro Spray heads, PS Ultra heads and Hunter Shrub Adapters.
  • Also fits Rain Bird 1800 Series, US400 Unispray series and Rain Bird Shrub Adapters..
Check Stock

WeldingCity Acetylene Heating Nozzle Tip MFA-1#8 (8-MFA-1) Size 8 Rosebud for Victor 100 Series Torch Handles

  • Premium quality Acetylene heating nozzle rosebud tip MFA-1 with mixer W-1 for Victor 100 series torch..
  • With multi-flame heating head for heat treating, straightening and priming applications..
  • Works with Victor light to medium duty 100 (not J-100) series handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
  • Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • ... make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 10 pieces of different size MK8 nozzles, include 8 pcs brass nozzles (0.2/0.3/0.5/0.6mm each 1pcs, 0.4mm nozzle 4 pcs)+ 2pcs black hardened steel nozzles 0.4mm. NOTE: Small accessories, please keep away from children..
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock