Best Sa 516 70 Plates

service_parts 1,2 Meter Aerial Lead 2 PIN Antenna FM AM for Sony Audio Reciever Systems STR-DH190 STR-DH590 STR-DH790 STR-DH770 STR-DN860 STR-DN1060 STR-DN1070 STR-DN1080 STR-ZA810ES

• Works For:BDV-E2100 HBD-E2100 BDV-E3100 HBD-E3100 BDV-E3200 HBD-E3200 BDV-E4100 HBD-E4100 BDV-E6100 HBD-E6100 BDV-EF1100 HBD-EF1100 SA-WGT1 HT-GT1 SS-GT1 HT-IV300 STR-KIV300 MHC-GT3D HCD-GT3D SS-GT3DP SS-GT3DB MHC-GT4D SA-WGT4D SS-GT4DB MHC-GT7DW SA-WGT7DW SS-GT7DWB MHC-M20 HCD-M20 SS-M20 MHC-M20D HCD-M20D SS-M20D MHC-M40D HCD-M40D SS-M40D MHC-M60D HCD-M60D SS-M60D MHC-M80D HCD-M80D SS-M80D MHC-V02 MHC-V21 MHC-V21D MHC-V3 MHC-V41D MHC-V42D MHC-V44D MHC-V4D MHC-V50 MHC-V50D.
• MHC-V71 MHC-V71D MHC-V72D MHC-V77DW MHC-V77W MHC-V7D MHC-V81D MHC-V82D MHC-V90DW SA-V90DW SS-V90DW MHC-V90W SA-V90W SA-V90W SHAKE-X10 HCD-SHAKE10 SHAKE-X10D HCD-SHAKEX10 SHAKE-X30 HCD-SHAKE30 SHAKE-X30D HCD-SHAKEX30 SHAKE-X70D HCD-SHAKEX70 STR-DH190 STR-DH590 STR-DH790 STR-DH770 STR-DN860 STR-DN1060 STR-DN1070 STR-DN1080 STR-ZA810ES.

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

• [What Is It] Small, portable with self contained radio and antenna, SHARI(SA818 Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
• [Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
• In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
• [Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
• [Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
• SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.

CYD 45W 19V Laptop-Charger Compatible for Acer-Aspire R13 R5 S5 S7 V13 Switch 11 11v 12 Alpha sw5-171 sw5-171p Aspire one Cloudbook 11 14 Spin 5 sp513 Swift 3 sf314

• CYD 19V 45W laptop charger compatible for Acer Aspire laptop charger adapter R13 R5-471T R5-571T S5-371 S7-392 S7-393.
• Switch 11 11V 12 Alpha SW5-173P SW5-271 SA5-271.
• Aspire One Cloudbook 11 14 AO1-131, AO1-431.
• Acer Swift 3 SF314-51 A13-045N2A PA-1450-26 Traditional Computer Tablet Power Supply AC Replacement Laptop Charger Adapter.
• CYD 45W Laptop Chargers compatible for Acer Aspire R 14 R11 R5-471T R5-471T-51UN R5-471T-52EE R5-471T-71W2 R5-471T-50UD Acer Aspire R 13 R7-371T R7-371T-5009 R7-371T-50V5 R7-371T-50ZE R7-371T-57SN R7-371T-59Q1 R7-371T-59ZK R7-371T-70KS R7-371T-70NC R7-371T-72CF R7-371T-72TC.
• 【Plug & Charge】 compatible for Acer Aspire S7 S7-392, S7-393: S7-392-5401 S7-392-5410 S7-392-5454 S7-392-6411 S7-392-6425 S7-392-6484 S7-392-6803 S7-392-6807 S7-392-6832 S7-392-6845 S7-392-7837 S7-392-7863 S7-392-7885 S7-392-9404 S7-392-9439 S7-392-9460 S7-392-9466 S7-392-9890 S7-393-7451 S7-393-7616.
• 【Perfectly & Exactly-Power cord compatible for Acer Aspire One Cloudbook 11, 14: AO1-131, AO1-431: AO1-131-C1G9 AO1-131-C6DS AO1-131-C7DW AO1-131-C9PM AO1-131-C9RK AO1-431-C1FZ AO1-431-C7F9 AO1-431-C8G8 Acer Swift 3 SF314-51: SF314-51-52D Acer Spin 5 SP513-51: SP513-51-30EU, SP513-51-55ZR.

Set of 8 Magnets for Metal/Magnetic Hoop - Brother Babylock Pfaff Viking Embroidery Machines - Magnet Magnets

• 8 Magnets for Use with the Metal/Magnetic Hoops Will work with the following Embroidex Hoop Models Brother: SA431 (SA308H) SA432 (SA311H) SA434 (SA314H) SA437 (SA309H) SA438 (SA312H) SA439.
• Brother: SA431 (SA308H) SA432 (SA311H) SA434 (SA314H) SA437 (SA309H) SA438 (SA312H) SA439 (SA315H) SA442 (SA307H) SA443 (SA310H) SA444 (SA313H) Pfaff/Viking PA006 (VK006M) PA116 (VK116M) PA202 (VK202M) PA889 (VK889M) PA940 (VK940M).

Embroidex Set of 4 Magnets for Metal/Magnetic Hoop - For Brother Babylock Pfaff Viking Embroidery Machines - Magnet

• 4 Magnets for Use with the Metal/Magnetic Hoops Will work with the following Embroidex Hoop Models.
• Brother: SA431 (SA308H) SA432 (SA311H) SA434 (SA314H) SA437 (SA309H) SA438 (SA312H) SA439 (SA315H) SA442 (SA307H) SA443 (SA310H) SA444 (SA313H) Pfaff/Viking PA006 (VK006M) PA116 (VK116M) PA202 (VK202M) PA889 (VK889M) PA940 (VK940M).

T-Power AC Adapter for CASIO Casiotone MT-40 MT-41 MT-45 MT-65 MT-68, CT-638 CT638 CT-700 CT770, SA-6 SA-21 SA-6, SA6, SA-65, SA65, SA-67, SA67 AD-1 Keyboard Piano ONLY Power Supply

• T-Power ( TM ) Made with the highest quality Brand-new Input Voltage Range: AC 100V - 240V, High-Quality Cable! This adapter has The Amazon.com Return Policy ..
• Compatible with: CASIO Casiotone MT-40 MT-41 MT-45 MT-65 MT-68 KEYBOARD , Casio Tone Bank CT-638 CT638 CT-700 CT770 , SA-6 SA-21 SA-6 , SA6 , SA-65 , SA65 , SA-67 , SA67 Tone Bank Keyboard ToneBank Piano , Mutec AC-1 Casio AD-1U SK-1 SK-5 SK-10 SA-5 AD-1UL AD-1 AD-1U SA-39 SA-75 SA-65.
• Compatible with: Casio 7.5V SA6 SA-6 SA39 SA-39 SA45 SA-45 SA65 SA-65 SA67 SA-67 SA75 SA-75 Keyboard , PN: AD-1U SK-1 SK-5 SK-10 SA-5 AD-1UL AD-1 AD1 AD-1U AD-5U.

Karat C-K512 12 oz Paper Hot Cup, Stock Print (Case of 1000)

• Available in: 8oz, 10oz, 12oz, 16oz, 20oz, and 24oz.
• Matching Lids: C-KDL516, C-KDL516B, C-KDL516-E, C-KDL516B-E, C-KDL516BRN-E, C-KDL516GRE-E, and C-KDL516PNK-E.
• Units Sold By: Case 1, 000 cups (50pcs per sleeve / 20 sleeves per case).

Melitta Barrio coffee grinder [French press up to 40 stage adjustable from espresso] VARIO-E

Godox SA-17 with Godox SA-P Projector to Bowens Mount for SL-60W UL150 VL150 VL200 VL300 SL200II SL-150W SL-200W

• Using the Godox SA-17 adapter tube,the Bowens Mount LED lamp can also easily use the SA-P projector and its accessories, such as lenses, transparencies,adjustable iris,etc.to obtain the point light source control effect and portray photos and videos The detailed light effects required for shooting..
• Must be used with SA-P projector?projection SA-P( Sold separately)can be used with abundant accessories to generate creative light effects. not only can replace different lenses, but also add various light shaping accessories, such as Godox SA-06 Iris Diaphragm, Godox SA-05 Scrim Set, SA-09 GOBO Set, SA-07 Framing Shutter, Godox SA-11C/SA-11T color Gels, correct the color and create various atmospheres..
• Can be compatible with any Bowens mount LED light, such as GODOX VL150 VL200 VL300 SL-150WII SL-200WII FV150 FV200 SL-150W SL-200W and other Bowens mount LED lights..
• Can be used with the SA-P projection accessory and other abundant accessories to generate creative lighting effects. Not only can you replace different lenses, but also add various light shaping accessories, such as Godox SA-06 Iris Diaphragm, Godox SA-09 GOBO Set, Godox SA-10 GOBO Set Holder, color correct and create various moods..
• Included: 1 * Godox SA-17 Adapter, 1 * Godox SA-P Projection A....

T-Power for AC Adapter Philips GoGear MP3 Player Opus Replacement Home Wall Charger and USB Data Charge Sync Cable Power Supply Cord Plug Spare

• T-Power (TM) Made with the highest quality.
• USB data cable is 3 feet long and can be used for charging or data transfer..
• Includes: USB charger, one microUSB charging and data cable.
• Compatible models: Philips GoGear MP3 Player 2GB 4GB 8GB -GoGear MP3 Player Aria Luxe Opus -GoGear MP3 Player Muse -GOGEAR MP3 Player SA028 SA1928 37 -GoGear MP3 Player Spark Muse Raga -GoGear MP3 Player Vibe Activa CAM GoGear Raga SA1922 SA1942 SA1982 GoGear SA080 SA080308 SA080316 K MP3 Player GOGEAR SA0283 37 93 98 MP3 Player SA1925 37 98 93 MP3 Player SA1928 37 93 98 MP3 SA1916 37 98 93 MP3/MP4 Player.

Tungsten Carbide Burr Set 1/4 Shank - Double Cut Carbide Burr for Metal Deburring Finishing Carving Grinding Polishing Engraving Drilling

• ✔️【1/4 Inch SHANK】 10pcs includes SF-3, SL-3, SA-3, SC-3, SE-3, SF-1, SL-1, SA-1, SC-1, SD-2, Fits most electric and pneumatic air die grinders..
• ✔️【WIDELY APPLICATION】Used for deburring, finishing, shaping and enlarging holes, removing welds,surface cleaning and smoothing castings. Widely used for wood metal drilling,engraving,carving..
• ✔️【HIGH QUALITY 】Carbide burr bits are made of high quality heat- treated tungsten carbide whose hardness can reach to HRC70 with long service life and lasting durability..
• ✔️【DOUBLE-CUT DESIGN】Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material and Processing good on Wood, Steel,Carbon Steel , Stainless Steel,Cast Iron, copper, marble, Ceramics and other non-metal..
• ✔️【5 STAR SATISFACTION】 Full 1 year warranty , Your satisfaction is our only mission. If have any questions, We will reply you within 24 hours..

19.5V 3.33A 65W AC/DC Adapter for Hp Pavilion Sleekbook 14, 15; Hp Envy Spectre Xt Pro 13, 14, 15 Ultrabook; Hp Sleekbook Envy 4, Envy 6 Series Power Supply Battery Charger

• ...tx 14-b002tx 14-b010us 14-b013nr 14-b015dx 14-b017cl 14-b017nr 14-b019us 14-b031us 14-b100 14-b109wm 14-b110us 14-b120dx 14-b124us 14-b130us 14-b137ca 14-b150us 14-b170us 14-b173cl 14z-b000 15-b000 15-b010us 15-b023cl 15-b038ca 15-b055ca 15-b017cl.
• Fits: hp Pavillion Sleekbook 14 15 Envy 4 6 Series.
• touchsmart 15-b100sa,15-b161sa Sleekbook 14-b141sa,15-b129sa,14-b130sa,b178sa,hp Chromebook 14-c002sa,14-c001ea,14-c001sa,14-q015sa,15-b195sa, HP ENVY Sleekbook 6-1000 Series, Hp 14 14z 15z Ultrabook, HP Pavilion Sleekbook 14-B 15-B 14-B000 15-B000 Series, 15-b050sa,15-b050ea,15-b135ea,15-b118sa,15-b109wm, Hp Sleekbook 14-b022au 14-b109wm,15-b146sa,14-b120sa,14-b022au,14-b109wm,15-b146sa,15-b105sg,15-b150er,14-b120sa,15-b135sa,14-b015dx.
• Fits: hp Envy Spectre Xt Ultrabook 13-2000,13-2000ea, 13-2003ef,13-2050nr,13-2057nr,13-2060ez, 13-2090la,13-2095ca,13t-2000.
• pavilion 14,pavilion 14-b010us,14-b013cl,14-b013nr,15-b015dx,14-b017cl,14-b019us,14-b031us,14-b110us,pavilion 14z 15 14z-b100.
• P/n: Ppp009d,613149-001,67770-002,613149-003,693715-001,677770-001 677770-002 677770-003, ppp009c.
• If you don't see your model here, you are very welcome to send us a email with your model or description of your product, we will find the right Power Adapter for you..

YUFUTOL Carbide Burr Set with 1/4 6.35mm Shank 8pcs Double Cut Solid Carbide Rotary Burr Set for Die Grinder Drill Metal Wood Carving Engraving,Polishing,Drilling

• Shape: 8pcs Carbide Rotary Burr Set includes SA-5，SA-3，SC-3，SC-1，SD-3，SD-1，SF-5，SF-3 - cutting burrs for die grinder accessories- fits most Rotary Die grinders.
• Durable: Made of heat-treated tungsten carbide that hardness can reach to HRC70, sharp and sturdy.
• Versatile: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting.
• Target:Suitable for all skill levels: this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable.
• Protective: Packed with a plastic case for safety storage and protection.