Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches
- 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
- PWM splitter cable connects an additional fan to increase airflow in your computer case.
- Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
- PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
- PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
- CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
- 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
- Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
- Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
- 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
- Add more cooling to your computer with t....
Check Stock
Rosewill ATX Mid Tower Gaming PC Computer Case, Tempered Glass, Supports 360mm GPU/360mm AIO Liquid Cooling, 4 x 120mm RGB LED Pre-Installed Case Fans with Remote Control - CULLINAN MX RGB
- The Coolest RGB LED Effect for Gaming Computer: The RGB gaming pc case with tempered glass demostrates the extraordinary RGB LED lighting effect with a remote controller. It allows user to adjust the RGB effects as solid LED color and Pre-programmed color modes (Rainbow, Gradient, Blade and Breath.) to show off your case..
- Tempered Glass Design to Show Gaming Desktop: The gaming case with tempered glass is surrounded with 3 sides of tempered glass to display your gaming computer desktop. ROSEWILL CULLINAN MX is a high quality tempered glass mid tower ATX computer case which is surrouned from the front and 2 sides. That makes ROSEWILL CULLINAN MX an elegant and misterous computer gaming case..
- Optimized Ventilation & Generous Expansion: With 4x pre-installed fans, including three 120 mm blue LED case fans in the front and one 120mm fan at the rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers are also allowed to install up to 170mm CPU Cooler and 360 mm Water-cooling Radiator in the front, 280 mm Liquid-cooling Radiator on top..
- Quite Operation & Top-Mounted Multiple I/O Ports: With the 5mm tempered glasses all around and quiet operated fans, this gorgeous computer case aims to provide the quiest level of computer ....
Check StockZmbroll PC Computer Case Cooling Fan Screws Cross Recessed Head Self Tapping Screw M5x10 Black and Silver Case Fan Mount Screws Long Short Screws Kit
- Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation.
- Computer case fan screws size:5*10KB/M5*10mm, fit for most computer case fan,the long Water cooling screw :6-32*30 ,3cm long.
- Made of high- quality metal,packaged in a handy box,good choice for a DIY personal computer building.
- Package includes 50pcs silver and 50 pcs black computer case Phillips Flat Head Screws and 40pcs black long flat head computer cooling fan screws.
- Self-tapping thread design for quick and easy installation of most standard plastic-framed case fans.
Check StockVAPKER 50PCS 6#-32x6 M3.5 PC Computer Case Thumbscrews Thumb Screws Black Zinc for Hard Drive Computer Case Motherboard Fan Power Graphics
- 【Size】6#-32, suitable for most computer case..
- 【Material】Made of high quality anodized aluminum, light weight, no fading, antistatic, long service life..
- 【PackageTotal】10-pcs Anodized Aluminum Thumbscrews..
- 【Easy to Install】Thumb screw design allows for easy, tool-less removal ideal for computer case panels. The computer thumb screws offer duplicate convenience in the event you need to re-open the computer case, as the thumb screws can be removed by hand without a screw driver..
- 【Widely Application】suitable for Computer case, PCI slot, or motherboard mounting.
Check Stock
Kuzy Compatible with MacBook Pro 13 inch Case 2012 - Old Version A1278, MacBook Pro Case 13 inch with CD Drive, Mac Book Pro A1278 Case, 2012 MacBook Pro mid 2011 2010, Black
- Older Version Computer Case for compatible with MacBook Pro A1278 Model Release 2012 2011 2010 2009 2008. This Laptop cover will Looks Great on your Mac Book Pro with CD Drive case. Protect with Style your compatible with MacBook Pro 13.3 inch case with Kuzy compatible with MacBook Pro shell.
- Easy to Install and Fully Vented for Safe Heat Disbursement. Hard Plastic Case with Soft Touch Finish over Top and Bottom Covers for Silky-Smooth touch and Grippy exterior texture for your compatible with MacBook Pro 2012 case protect from scrapes and scratches MacPro A1278.
- Best Mac Book Pro 13 inch with CD ROM Case Features, No cut out design, Logo See Through the case. Access to all ports, DVD drive and open/close your compatible with MacBook Pro 13 mid 2012 case all the way. Lightweight Sturdy and Ultra Thin Computer Case compatible with MacBook Pro 13 A1278.
- Compatible Only with Older Version A1278 compatible with MacBook Pro Case 2011 - 2008 MB466LL/A, MB467LL/A, MB990LL/A, MB991LL/A, MC374LL/A, MC375LL/A, MC700LL/A, MC724LL/A, MD313LL/A, MD314LL/A, MD101LL/A, MD102LL/A. Perfecr Design to fit compatible with MacBook Pro 2011 Case and Mac Book Pro Case 2010.
- At Kuzy, we are committed to providing our customers with superior-quality A1278 Laptop Cover Accessorie....
Check Stock
Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches
- PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
- 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
- Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
- Fans can spin at the same speed using software from a motherboard equipped with PWM control.
- Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
- The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
- Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
- Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
- 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock
PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches
- 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
- PWM splitter cable connects an additional fan to increase airflow in your computer case.
- Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
- 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
- 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
- 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
- Add more cooling to your computer with this PWM fan splitter cable..
- 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check StockHonbay 40PCS 6#-32x5 M3.5 PC Computer Case Thumbscrews Thumb Screws Black zinc
- Size: 6#-32, suitable for most computer case.
- Package: Total 10 PCS Anodized Aluminum Thumbscrews.
- Material: Made of high quality Anodized Aluminum, resistant to stripping, screwdriver slot on top, nice weight, great grip.
- Easy to Install: Thumb screw design allows for easy, tool-less removal ideal for computer case panels. The computer thumb screws offer duplicate....
- Widely Application: suitable for Computer case, PCI slot, or motherboard mounting.
Check StockKoonice Hard Case Compatible for Apple Magic Mouse (I and II 2nd Gen) Including Carabiner (Silver)
- ✅ Inner Dimension：5.1″×3.0″×1.4″.Premium carrying case specially made for Apple Magic Mouse (I and II 2nd Gen).
- ✅ Durable hard EVA mouse case keeps your expensive magic mouse safe and protected.
- ✅ The net section inside where you can put the charging cable, memory cards or ear buds.
- ✅ The carabiner makes it easy to hang the mouse case on your computer bags or backpacks.
- ✅ Easy to put in and take out. For sale is case only, device and accessories are not included.
Check StockInateck Mounting Bracket for 2 x SSD/HDD, Compatible with Regular PC and Mac Pro 2019, with SATA Cable and Installation Tool
- Work with Regular Computer Case: Widely compatible with different desktop computer cases. With the bracket you can mount a 2.5” hard drive to the 3.5” hard drive slot in a computer case..
- Work with Mac Pro 2019: Can be mounted to a Mac Pro 2019. With this mounting kit, you can install 2 x 2.5” SSDs/HDDs in Mac Pro 2019..
- Dual Hard Drive Installation: Supports installing 2 x 2.5” SSD/HDD. A single hard drive is also applicable..
- Metal Strip Support: Put your hard drive on the metal strip support, and turn the screws into the holes on the two sides of the hard drive. No need for holding the hard drive manually..
- Easy to Install: For Mac Pro 2019, lead the bracket into the computer case via the slideways and fix it from the outside with screws. For a regular computer case, you can install the bracket with screws..
Check Stock10 x Black Anodized Alumium Computer Case Thumbscrews 6-32 Thread for Cover / Power Supply / PCI Slots / Hard Drives
- 【Size】6#-32, suitable for most computer case..
- 【Material】Made of high quality anodized aluminum, light weight, no fading, antistatic, long service life..
- 【PackageTotal】10-pcs Anodized Aluminum Thumbscrews..
- 【Easy to Install】Thumb screw design allows for easy, tool-less removal ideal for computer case panels. The computer thumb screws offer duplicate....
- 【Widely Application】suitable for Computer case, PCI slot, or motherboard mounting.
Check Stock
ALSEYE PC Fans 120mm Case Fan 4-pin High Performanc Computer Fan 2000 RPM Speed | Static LED DC 12v RGB Fans
- 120mm Fan Rgb (Unadjustable): Static LED pc fan 120mm quiet Double-halo design can make this computer case fans generate stronger stereoscopic light impressions and better visual effects. Universally applicable 120*120*25mm computer fans for desktops rgb..
- CPU Fan Features: CPU fans Hydraulic bearing has larger oil storage space, and the unique loop oil supply circuit makes the computer cpu cooling fans have faster-rotating speed and longer service life, high static pressure and superior cooling efficiency..
- High Airflow: Blades with high wind pressure design can let these pc case fans reach maximum air volume to 42.5CFM, constantly bring your computer cooling fans for gaming pc, 4-pin PWM connector for automatic speed control via 120mm rgb fan..
- Low-Noise Operation: Computer case fan Double-sided design with a vibration-reducing cushion to alleviate shock, these pc case fan can running stable and silent. Flow Acceleration Channels and Advanced Acoustic Optimisation frame for rgb case fans quiet performance..
- If you encounter pc cooling fan any problems, please contact us in time, ....
Check Stock
co2CREA Hard Case Replacement for Logitech Ergo M575 M570 Wireless Trackball Mouse
- co2CREA hard travel case replacement for Logitech ERGO M575 wireless trackball mouse or Logitech M570 wireless trackball mouse wireless ball mouse. Hard EVA shell case is shockproof dustproof and water resistance, protect your Logitech trackball mouse track balls mouse wireless computer mouse wireless Logitech ergonomic wireless mouse ergo mouse with ball from drops, scratches, bumps, splash, and dust..
- This computer trackballs wireless Logi mouse protection case perfect for your Logitech ERGO M575 track ball mouse wireless mouse Logitech M570 wireless ergonomic mouse wireless Bluetooth trackball mouse , and this Logitech trackball wireless mouse case has more space to accommodate the Logitech mouse ergonomic roller ball mouse usb wireless logitec mouse more accessories..
- co2CREA hard wireless mouse for computer trackball Logitech ergonomic mouse case is a build-in super quality lining reflects superior taste and ensures a long-lasting performance, the soft anti static lining can protect your Logitech M575 rollerball mouse trackball mouse wireless mouse ergonomic Logitech M570 trackball wirless mouse from bumps dents and scratches..
- This Logitech wireless trackball mouse case has a comfortable hand strap, so that the Bluetooth ergonomic mouse ....
Check Stock
