Categories

Best Safe Head Gear

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Aluminum Weighted Manual Shift knobs, Long Stick Shift Knob Gear Shifter Knobs, Car Accessories Lever Cover Head 5 inch Universal Shifter Knobs with 3 Threaded Adapters M8 M10 M12 x 1.25(Black)

  • ... driving habits, improves the driving experience and manipulative sense.
  • ✔[ INSTALLATION ] Remove the original gear shift knobs head, choose a rubber sleeve suitable for the size of the gear shift lever, turn the rubber sleeve into the gear shift lever knobs, if loose can bind up some tape to get a tighter fit and safe, put the gear shifter head directly into the rubber sleeve.
  • ✔[ 3 THREADED ADAPTERS ] Different size of adapters make it universal fits for different cars. 3 threaded adapters size M8: 8*1.25mm, M10: 10*1.25mm, M12.
  • 12*1.25mm, the stick original size is 0.65in/1.65cm, directly fit without adapters.
  • ✔[ MOST FIT APPLICATION ] Fits on most auto & manual (MT) cars gear shift knob, SUV, truck for most brands of cars, SUV, trucks, RV etc. But Pls Note: it doesn’t fit for auto shift knob with LOCK BUTTON or manual shift knob cars with "pull up ring'' to ''reserve".
Check Stock

Aluminum Weighted Manual Shift knobs, Long Stick Shift Knob Gear Shifter Knobs, Car Accessories Lever Cover Head 5 inch Universal Shifter Knobs with 3 Threaded Adapters M8 M10 M12 x 1.25 (Blue)

  • ... driving habits, improves the driving experience and manipulative sense.
  • ✔[ INSTALLATION ] Remove the original gear shift knobs head, choose a rubber sleeve suitable for the size of the gear shift lever, turn the rubber sleeve into the gear shift lever knobs, if loose can bind up some tape to get a tighter fit and safe, put the gear shifter head directly into the rubber sleeve.
  • ✔[ 3 THREADED ADAPTERS ] Different size of adapters make it universal fits for different cars. 3 threaded adapters size M8: 8*1.25mm, M10: 10*1.25mm, M12.
  • 12*1.25mm, the stick original size is 0.65in/1.65cm, directly fit without adapters.
  • ✔[ MOST FIT APPLICATION ] Fits on most auto & manual (MT) cars gear shift knob, SUV, truck for most brands of cars, SUV, trucks, RV etc. But Pls Note: it doesn’t fit for auto shift knob with LOCK BUTTON or manual shift knob car with "pull up ring'' to ''reserve".
Check Stock

Aluminum Weighted Manual Shift knobs, Long Stick Shift Knob Gear Shifter Knobs, Car Accessories Lever Cover Head 5 inch Universal Shifter Knobs with 3 Threaded Adapters M8 M10 M12 x 1.25 (Red)

  • ... driving habits, improves the driving experience and manipulative sense.
  • ✔[ INSTALLATION ] Remove the original gear shift knobs head, choose a rubber sleeve suitable for the size of the gear shift lever, turn the rubber sleeve into the gear shift lever knobs, if loose can bind up some tape to get a tighter fit and safe, put the gear shifter head directly into the rubber sleeve.
  • ✔[ 3 THREADED ADAPTERS ] Different size of adapters make it universal fits for different cars. 3 threaded adapters size M8: 8*1.25mm, M10: 10*1.25mm, M12.
  • 12*1.25mm, the stick original size is 0.65in/1.65cm, directly fit without adapters.
  • ✔[ MOST FIT APPLICATION ] Fits on most auto & manual (MT) cars gear shift knob, SUV, truck for most brands of cars, SUV, trucks, RV etc. But Pls Note: it doesn’t fit for auto shift knob with LOCK BUTTON or manual shift knob cars with "pull up ring'' to ''reserve".
Check Stock

67i Skateboard Helmet Adult Bike Helmet Adjustable and Protection for Skating Helmet Adults  Multi-Sports Cycling Skateboarding Scooter Roller Skate Inline Skating Rollerblading (Black)

  • IMPACT RESISTANCE: The adult bike helmets are specially designed for Multi-Sports Head protection. The material use is tough and durable PVC & PC, EPS foam which would help absorb the impact and protect your head during impact.
  • MULTI-SPORTING GEAR: The adult skateboard helmet are flexible and suitable for Multi-sports activities, include cycling, skateboarding, scooter, inline & roller skating. These helmets would be the essential protective gear for any outdoor sports-lovers.
  • HEAD SIZE: Please measure the skateboard helmet circumference of your head before placing orders. Large size is 22.83"-23.82"(58-60.5cm).
  • ADJUSTABLE FIT: Our skateboard helmet has an adjustable spin dial on the back of the helmet to ensure you achieve a perfect and safe fit. After a day of riding you can easily remove the inner lining and wash away any sweat..
  • WHAT YOU GET: 67i Adult Skateboard Helmet & Our friendly customer service. Any product size or other questions, please contact us in time, We will try our best to solve your problem..
Check Stock

Skateboard Helmet, Multi-Sports Roller Skating Scooter Helmets Rollerblading Bicycle Helmet Cycling BMX Bike Helmets for Youth, Teens & Adults

  • 【Adjustable Helmets】Medium: 55-58CM/21.65''-22.83'', suitable for 9-13 years. Large: 58-61CM/22.83''-24.02'', suitable for over 14 years. These Skateboarding helmets come with an adjustable strap which make it flexible to fit you. The flexibility of the strap make it a unisex product and would fit both well for both men and women, boys and girls.
  • 【Impact Resistance】These skateboard helmets are specially designed for multi-sports head protection. The material use reinforced ABS shell & thickened shock-absorbing EPS core which would help absorb the impact and protect the head during impact.
  • 【Extremely Comfortable】14 air vents, special aerodynamic design and breathable foam, this teenage/youth skateboard helmet help reduce sweating and feel cool. Removable internal foam is easy to tear for cleaning.
  • 【Multi-Sporting Gear】 These bike helmet/skating helmets are flexible and suitable for Multi-sports activities, include cycling, skateboarding, scootering, inline, roller skating, BMX, MTB. These helmets would be the essential protective gear for any outdoor sports.
  • 【Safe and Reliable】This bike helmet passed CPC safety certification can provide professional protection to your and keeps you safe from bumps and bruises.
Check Stock

G4Free Youth Adult Skate Helmet, Protective Gear with Elbow Knee Wrist Pads for Multi-Sports Skateboarding Bike Riding Hiking Scooter Inline skatings Longboard

  • .... They are all wrapped with drawstring bag.
  • 【DURABLE AND STURDY HELMET】–This bike & skateboard helmet is specially designed for adults head protection, durable ABS shell can protect the head from impact damage, EPS foam and extra sponge pads can effectively absorb shock, it provide all-round protection of head safety. 12 air cooling vents provide sufficient air flow, reduce sweating, keep cooling and comfortable.
  • 【COMPREHENSIVE PROTECTION PADS】–We are committed to providing you with professional protection! The sturdy PP shell can effectively prevent damage to the knees, elbows and wrists from the impact, with a wide EVA lining inside, which has strong shock absorption. The Knee and Elbow Pads are designed with segmented cushioning foam, reducing the restrictions on joint movement. Safe and Comfortable.
  • 【FIT FOR MULTIPLE SPORTING PURPOSES】–The essential protective gear for big kids & Youth&adult outdoor activities including skateboarding, hover boarding, cycling, rollerblades, biking, will give you all-around safety protections.
  • 【ADJUSTABLE PROTECTIVE GEAR SET 】– Helmet size M for Youth/ big kids(Suggestion age:8-14), size L for Adults,Please measure your knee / elbow / wrist circumference and compare with the size chart before or....
Check Stock

Abfer Shift Knob Cover Auto Interior Accessories Car Stick Shifter Head Protective Cover Set Fit Most Vehicle SUV Truck (Black)

  • Quality: The gear shift head cover is not only exquisite in workmanship, flexible and adjustable in size, it is not easy to slide after installation, but also has good material, breathable, sweat-absorbing, very soft and elastic. Very comfortable to hold.
  • Protection: It can effectively block the direct sunlight of the sun, prevent oxidation, rust, abrasion and scratches of your car's gear shift knob head, and effectively extend the service life of the shift knob head..
  • Convenience:Easy to clean, not easy to deform, easy to install, just put it on the gear head..
  • Function: The gear shift head cover has a simple and elegant appearance, which is not only very suitable for decoration of automobile gearshift heads, but also a good choice for gifts..
  • Size: Length: 2.08inch（53mm) Upper width: 1.02inch (26mm) Lower width : 1.02inch (26mm), the length is unchanged, and the Lower width can be adjust..
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Pine Tree Complete Vinyl MMA Taekwondo Karate Sparring Gear Set with Bag Shin Hand Foot & Groin Guard

  • You get 14 items With this set! You will receive: a dipped foam head gear of your choice in color and size, 1 pair of padded forearm guards, 1 pair of....
  • Keep your head safe with padding around the head.
  • Train safely with padded guards featuring high impact dispersing foam!.
  • Safely protects your back and shoulders with extra thick padding!.
  • Non-slip and secure double velcro straps..
Check Stock

Manual 5 Speed Shift Knob, Car Auto Gear Shifter Knob Stick Head Lever for Mazda 3 5 6 323 626 RX8 Black

  • Shift Knob for Chevy Cruze---- This gear shift knob is especially designed for Chevrolet Cruze 2008 2009 2010 2011. 100% brand new, confirm whether the product is suitable before purchasing.
  • High Quality Shift Knob---- The gear shift knob head is made of high quality ABS plastic, durable, wear-resistant, long service life. The manufacture of the shift knob head meets the strict quality requirements.
  • Comfortable to Use---- The car gear shift knob has exquisite workmanship, ergonomic design for comfortable operation feeling. 6 speed gear(1, 2, 3, 4, 5, 6) and reverse sign painted on the top, no fading.
  • Fashionable Design---- The 6 speed gear stick shift knob has a unique stylish design, become a luxury and fashionable decoration in your car. Exquisite workmanship, enhance the car interior style, more personalized.
  • Good Replacement Part---- The gear shift knob meets the original factory standard, easy to install and can replace the old or damaged shifter head directly.
Check Stock

Pro Force Lightning Karate/Martial Arts Headgear (Pink, Medium (Head Circ: 21\ - 22\))

  • Protective Headgear：TTP boxing headgear provide a 360 degree full coverage protection for face (nose-chin-cheek-ears-eyes) and head. Ideal for protection at any level without compromising on visibility.
  • Shock Absorbent: The head gear also provides sufficient foam padding, which could protect your head by delivering robust shock absorption and keep you safe from all sorts of hits.
  • Comfortable Wear: Exterior of the headgear is made from durable synthetic leather stitched together with strong threads,inside is lined with soft and water-resistant material. The boxing helmet feels light and comfortable on the head.
  • Adjustable Fit: Hook and closure loop strap on head provides a snug fit and avoids any chances of slippage. This headgear for boxer is also easy to put on and tighten by yourself.
  • 2 Size available: The sparring headgear comes in 2 different sizes for both youth and adults. S/M are recommended for most youth, S/M - Head Circumference 18.9 -21.3 inches. L/XL- Head Circumference 21.3-25.6 inches.
Check Stock

Abfer Car Shifter Knob Cover Auto Interior Accessories Stick Shift Head Protective Cover Set Fit Most Vehicle SUV Truck (Beige)

  • Quality: The gear shift head cover is not only exquisite in workmanship, flexible and adjustable in size, it is not easy to slide after installation, but also has good material, breathable, sweat-absorbing, very soft and elastic. Very comfortable to hold.
  • Protection: It can effectively block the direct sunlight of the sun, prevent oxidation, rust, abrasion and scratches of your car's gear shift knob head, and effectively extend the service life of the shift knob head..
  • Widely used: Fit for most cars, trucks, vans,sedan, SUV, etc. Size: Length: 1.88inch（48mm) Upper width: 0.98inch (25mm) Lower width can be adjusted. Please confirm whether the size is appropriate before purchasing..
  • Convenience:Easy to clean, not easy to deform, easy to install, just put it on the gear head..
  • Function: The gear shift head cover has a simple and elegant appearance, which is not only very suitable for decoration of automobile gearshift heads, but also a good choice for gifts..
Check Stock