Pin Backs, Selizo 84pcs Locking Pin Backs Lapel Push Pin Keeper Blank Pin Locks for Disney Pins, Lapel Pins, Enamel Pins, Brooch Pins and Hat Pins (Assorted Styles)
- QUANTITY: Selizo pin backs set comes with totally 84 pieces of locking pin backs in 3 different styles and colors, different styles and colors to fit all kinds of lapel pins, enamel pins, brooch pins and hat pins.
- ASSOTEDD STYLES & COLORS: The pin backs locking set are in 3 different styles: metal push pins, metal butterfly clutch pin backs and rubber pin backs. The metal pin locking backs are in gold and silver colors, while the rubber pin locks are in black color. Provide you a nice selection to fit your different needs.
- EASY TO INSTALL & REMOVE: These lapel pin backs are easy to put on and take off without any tools. For the metal pin keepers, simply pull up the enamel pin back to secure onto and remove. For the butterfly clutch pin backs, push the trigger to secure onto and release.
- HIGH QUALITY PIN BACKINGS: The metal brooch pin backs are made of durable copper material that are strong and sturdy to hold and hard to break. While the rubber blank pins are made of PVC rubber that are durable and comfortable to use.
- WIDELY APPLICATIONS: Our pin holder set are great choice to use with brooches, name tags, hat pins, pin badges, lapel pins, enamel pins, homemade craft pins, toy pins, citation bars, service bar, etc. They also can be used for holding tie t....
Check StockLapel Pin Backings,Butterfly Clutch Pin Backings PVC Rubber Pin Backs Pin Keepers for Replacement Uniform Badge (Black, Pack of 50)
- Nice packing-Rubber backs are packed in a transparent plastic box,Each box contains 50pcs rubber pin backers. Pin Locks suits for lapel pins, badges, hat, tie tacks, name tag, toy pins, citation bars,etc..
- Super practical-These PVC rubber pin backs are totally awesome! because they keep the pin from moving around.The soft rubber pin back effectively isolate sharp metal pins and ensure they remain in place,Great replacement for pin clutch backs..
- If you wear lapel pins on the reg. Throw away the metal backs that don't grip and replace them all with these rubber backs that won't fall off, leaving your pin lost on the ground somewhere. They have great grip, and don't loosen with time..
- the PVC pin back is tight and they are not easy to fall off.
- Each pin back has a hole which is compatible with the tie tack pin,The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim..
- Put the pin in the rubber pin backing, your items will keep pinned securely. With smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature.If there is any problem or these Pin backings does not fit your, just contact we will return full refund to you..
Check StockSUBANG 30 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
- Package Contents: 30 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing.
- each pin sizes is approx. 1 cm in diameter and 0.7 cm in height..
- Quality Material: pin backs are made of quality nickel-plated copper, small and sturdy.
- The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience.
- The small size makes it unobtrusive while maintaining stability..
- Delicate Design: the pin backs match for most metal pin.
- Metal pin backs provides good grip of pin to keep it stay in place.
- Its firm and protective grip assures that you will never lose another pin..
- Easy Use: these pin keepers are easy to put on and take off without a tool.
- Simply push to secure onto pin post while holding onto your pin to release.
- These locking pin backs are very smooth and prevent the skin from getting stuck injury..
- Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests, hats, badges, collections, etc..
Check Stock24 Sterling Silver Lever Back Earrings Earwire Findings
- ...erent sizes of earring posts, including 50 pairs 4mm earring pin studs, 25 pairs 6mm earring pin studs, 100 pieces butterfly earring backs and 200 pieces rubber bullet earring backings. (1 inch=25.4mm or 1mm=0.0393 inch)cks fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
- Safety Material:Both the jewelry posts and the butterfly earring backings are made of stainless steel,anti corrosion and stain resistant, durable and not rusty,lightweight.The clear bullet earring backs are made of rubber, non-toxic, so you don't have to worry about ear allergies..
- Good replacement:Our flat pad earring studs are sturdy and easy to use, 2 sizes give you more choices and more combinations.please heat and rub the studs with alcohol before use. Earring backs fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
- Perfect DIY Making:Earrings posts with with Flat head design is more convenient to stick, ,Just use hot liquid glue to stick gems or small pattern accessories on the earrings post flat pad,making your homemade stud earrings a unique personality.cks are made of rubber, non-toxic, so you don't have to worry about ear allergies..
- Wide Application:Earrings backs fit to most of the earrin....
Check StockRustark 120Pcs 3 Sizes Silver Tone Pin Back Clasp Brooch for Badge Crafts, Jewelry Crafting, Sewing Fabric, Making Corsage - Small/Medium/Large
- ✔ MULTI-PURPOSE: Pin backs can be glued onto any surface to DIY crafts. Good for making pins, name badges and similar craft items..
- ✔ EASY TO USE: Pin back with 3 or 2 holes, easy to operate. You can stick decorative crafts with glue, or sew the hole directly..
- ✔ PIN BACKS LOCKING: Annular bayonet design. When you wear the corsages and close the bayonet, it will never drop, so don’t worry the risks of falling. Let you avoid embarrassing situations..
- ✔ DURABLE: Stainless steel plated, not easy to get rusty. It still keep bright and shining after used for a long time. Not easy to break..
- ✔ PACKING INCLUDES: Package includes 3 size, every size have 40 pieces of pin backs, 120Pcs in total. The large and medium pin backs have 3 holes, the small pin backs 2 holes for attaching beads, dangles, fringe and more to create a personalized accessory that can be worn on coats, sweaters or hats..
Check StockARTIBETTER 100pcs Rubber Pin Backs Lapel Pin Backs Butterfly Clutch Backings Pin Cap Keepers Star Shape for Badges Pink
- This set of pin backings is enough for replacement to your badges, pins etc. It is also used for DIY crafts pin, lapel pins etc. No other tools....
- Light weight and portable, easy to carry and storage. Practical Pin Badges Lapel Pin Backing Cap Tie Tacks Pins Holders.
- The pin backing is tight and they are not easy to fall off. Rubber Pin Backs Lapel Pin Backs Butterfly Clutch Backings Pin Cap Keepers Star Shape for....
- Made in good material for keeping pin stay in place. Star shaped appearance makes it more delicate than others..
- locking lapel pin backs Pin Back Replacement.
Check StockOnwon 20 Pieces Pin Backs Locking Bulk Metal Pin Keepers Locking Clasp, No Tool Required, Metal Locking Pin Backs, Metal Locking Pin Keepers (20)
- No tool required: easy on-off action, spring loaded fastener simply need you to push to lock them, then push on the base to secure them and pull to loosen the lock and remove..
- Locking pin backs dimensions: pin backs is 10mm in upper diameter, 5mm in bottom diameter, 5mm in height.
- Good quality: pin backs locking clasps are made of nickel-plated copper, durable, smooth surface, sturdy and lock your pins firmly to keep them secure..
- Safe alternative pins keepers: pin backs provide you replacement to the torn screw or wrench locking mechanism.
- Keep your objects in place during important moments..
- Multifunctional: secure pin backs are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, etc..
Check Stock450PCS Earring Posts Stainless Steel Flat Pad,Hypoallergenic Stud Earrings with Butterfly and Rubber Bullet Earring Backs for Jewelry DIY Making Findings (Silver) (Silver)
- ...erent sizes of earring posts, including 50 pairs 4mm earring pin studs, 25 pairs 6mm earring pin studs, 100 pieces butterfly earring backs and 200 pieces rubber bullet earring backings. (1 inch=25.4mm or 1mm=0.0393 inch)cks fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
- Safety Material:Both the jewelry posts and the butterfly earring backings are made of stainless steel,anti corrosion and stain resistant, durable and not rusty,lightweight.The clear bullet earring backs are made of rubber, non-toxic, so you don't have to worry about ear allergies..
- Good replacement:Our flat pad earring studs are sturdy and easy to use, 2 sizes give you more choices and more combinations.please heat and rub the studs with alcohol before use. Earring backs fit to most of earrings, it is a good replacement for your losing earring backs and earrings.
- Perfect DIY Making:Earrings posts with with Flat head design is more convenient to stick, ,Just use hot liquid glue to stick gems or small pattern accessories on the earrings post flat pad,making your homemade stud earrings a unique personality.cks are made of rubber, non-toxic, so you don't have to worry about ear allergies..
- Wide Application:Earrings backs fit to most of the earrin....
Check StockSUBANG 40 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp with Storage Case
- Package Contents: 40 pieces pin back locks with small clear storage case packed to avoid locking pin backs losing.
- each pin sizes is approx. 1 cm in diameter and 0.7 cm in height..
- Quality Material: pin backings are made of quality nickel-plated copper, small and sturdy.
- The metal material makes it durable and colorfast, giving you an incredibly sturdy and safe experience.
- The small size makes it unobtrusive while maintaining stability..
- Delicate Design: the pin back match for most metal pin.
- Metal pin backs provides good grip of pin to keep it stay in place.
- Its firm and protective grip assures that you will never lose another pin..
- Easy Use: these pin keepers are easy to put on and take off without a tool.
- Simply push to secure onto pin post while holding onto your pin to release.
- These locking pin backs are very smooth..
- Wide Applications: the metal pin back can be applied when tie tacks and lapel pins lose their back, or for homemade craft pins, suitable for brooches, name tags, display books, hanging ropes, bags, vests, hats, badges, collections, etc.
Check StockBar Pins Brooch Clasp Pin Backs Safety Pin 120 Pieces Silver for Name Tags, Badges (4 Sizes 20mm 25mm 32mm 38mm)
- DIMENSIONS: Silver tone bar pin backs that come in 4 sizes: 0.75 Inch (20mm), 1 Inch (25mm), 1.25 Inch (32mm) and 1.5 Inch (38mm). Each set comes with 30 pieces of each size, for a total of 120 brooch clasps in a plastic box..
- DURABLE: Made from iron metal with a strong nickel plating to ensure long lasting durability. Sturdy, secure and will not fall apart or rust easily..
- EASY TO USE: Bar pins have flat backs with 2 or 3 holes so you can sew or glue them on. Safety pin backs have a clasp, which makes attaching and detaching a breeze..
- MULTIPURPOSE: Great for jewelry making, DIY crafting, sewing or corsage making. Perfect replacements for lost or damaged brooch pins on name tags, insignia badges, citation bars and more!.
- 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.
Check StockBEADNOVA Plastic Clear Earrings for Sports Clear Ear Studs for Work Invisible Earrings Retainers Pierced Ear Protectors Rubber Earring Blank Pins Earnuts (500 Pairs)
- SIZE - The pin length is 11mm and the diameter of pin top is 3mm. The pin thickness is 0.8mm and the height of rubber earring backs is 5mm..
- ANTI-ALLERGY - The clear earring oins and backs are made of Allergy-Free plastic. It is comfortable, lightweight and strong..
- QUANTITY - Totally 500 pairs of earring pins and backs, includes 500 pieces of earring pins and 500 pieces of earring backs..
- WIDE USAGE - Sometimes when you are doing sports, working, or having skin irritation problem, you are not allow to wear ear piercings. These ALLERGY-FREE plastic earring pins and backs are suitable to you!.
- POSTS FOR DIY - Dome shape pin top which can stick some beads, imitation pearls and other objects to make your own earrings!.
Check Stock100 Pack of Safety Pin Bars with Adhesive - Name Tag Holder for ID Badges & Crafting Parts - Best Name Badge PIN Backs Available - by NuBliss
- QUALITY - - Made of high-quality durable plastic, the pin is nice and sturdy and wont bend easily assuring a long-lasting experience. The front end is equipped with an adhesive tape strip, the release liner removes easy without causing any frustration..
- PERPOSES -- It’s the perfect safety pin badge holder for anywhere, place or occasion. Great for Schools, work, conferences, hotel staff, trade shows, art ‘n’ crafts etc. to use, remove the release liner from the front end of adhesive tape located on the front end of the pin, apply your name badge on the sticky adhesive strip. Now simply pin onto your shirt, jacket, coat etc. and it will stay all day without you remembering it’s there! That’s how light and convenient it is..
- PACKAGE CONTENTS -- 100 high quality safety pin bar badge and name tag holders. Caution: be careful when the safe pin is open not to harm yourself or people around you. Keep pins away from babies and young children.
- PRODUCT DIMENSIONS -- Each safety pin bar is about 1.5” x .25” x .25”. the package with all 100 units is roughly 6.5” x 4” x .5”..
- MONEY-BACK GUARANTEE -- Our Safety Pin Bar with Adhesive, badge pin backs, name tag holders are backed by our 100% customer satisfaction guarantee policy to ensure tha....
Check Stock50PCS Metal Pin Backs, Pin Keepers Locking Clasp for Badge Insignia Pin Backs Replacement (Silver)
- 【Small Size】: Pin backs diameter is 11mm, 7 mm in height. Sturdy and light, lock pins firmly and keep them secure..
- 【High Quality Material】: Made of durable nickel-plated copper. Put the pin in the metal pin backing, your items will keep pinned securely..
- 【Easy to Use】: Butterfly clutch with spring fastener slices allow you easy to install and remove, handy and convenient for use..
- 【Widely Applicarion】: Pin clutch backs good for all lapel pins, tie tacks, badge insignia, citation bars and jewelry replacement..
- 【Package】: Pack in the metal box easy to carry, including 50pcs pin backs, keep your brooch/ badge safe..
Check Stock